Behind the Luck.
Release time:
2020-08-14
"Luck"
Artificial Bezoar Workshop Reconstruction Documentary
After four months of intense work, 8# September 9 , the artificial bezoar technical renovation project of Qiubin Factory was successfully completed, 8 18 , 19 , 20 , the trial production of the first three batches of products was successfully completed. Yi Shengrong, director of the Akihama Factory, lamented, "We are lucky this time".
Good luck, this is of course a joke. To do such a big project well, luck alone is of course not enough. What really plays a decisive role is the seriousness and hard work of the project team members.
Pharmaceutical Company has many years of successful experience in producing artificial bezoar, but from the beginning of the project transformation, due to the use of raw materials, production process, process standards, and production scale are almost different, so the previous experience is not for them. Help, can only be explored from scratch through the efforts of participating construction personnel. From the beginning of the
project, the project team was formed by Yi Shengrong, director of Qiubin Factory, Yu Chengfeng, production technology department, Yan Xixia, workshop director, Fang Weiming, mechanic, and Tang Songnian, electrician. While ensuring normal production, the project began to transform. The civil engineering project of workshop
started in March 4 . The project team members divided their work according to their own fields. Fang Weiming and Tang Songnian, who were responsible for equipment selection, went to many equipment manufacturers to understand relevant information, make comparisons and prepare for bidding. Compared with the previous production, the requirements for environmental protection are higher now. When designing the artificial bezoar workshop, it was decided to adopt dust-free transportation. All equipment is connected through pipelines. In order to meet this requirement, most equipment must be customized from the manufacturer. Before the formal bidding of the equipment, the project team also held a special meeting to brainstorm and put forward opinions and suggestions on equipment selection according to the collected information and their own work experience. It has been suggested that corn starch is one of the main raw materials for the production of artificial bezoar. A lot of heat will be generated during the ball milling process. If the temperature is too high, the starch will stick together and affect the quality of the product. Although there is no requirement for this in the process standard, it can be related to the quality of the product, so when selecting the equipment, the equipment manufacturer is required to increase the cooling system for the heat dissipation problem of the ball mill. Fang Weiming said that it takes three months for general equipment manufacturers to obtain orders and provide products, but we only have more than one month, and the equipment is not stereotyped, so the two sides have communicated repeatedly many times.
Despite this, there were still some small "episodes" in the acceptance stage before the equipment entered the site ". There is a gap between the inlet and outlet of the equipment and the previous requirements, which will cause waste of raw materials. But because the construction period is very tight, the time nodes of each link are very close, if you can not enter the site on time, the whole project will be affected. This can be anxious for the project team. After communication and arrangement, it was finally decided to give the equipment manufacturer a week to revise it. After meeting the required requirements, the equipment was pulled over quickly. Other minor problems can only be to let the equipment manufacturer personnel come over and make on-site modifications.
In the trial production stage, in order to save costs, Qiubin Factory decided that the batch of products is 100 kg, while the design capacity of the equipment is 500 kg. There is no data that can be directly referred to for the process parameters such as ball mill speed, ball milling time and ball quantity. Before the trial, the members of the project team also consulted relevant production enterprises, however, the other party has only tried batch 300 kg, and has not succeeded. There are more than ten kinds of trial production schemes involved in the three parameters. Time and cost are not allowed to try multiple schemes. We can only rely on the collection and selection of indirect experience collected by project team members from various channels, and finally confirm the formation of the scheme decided to put into production. The trial production was an unexpected success. All the indexes of the three batches of trial production products passed the test. Moreover, the color, the most difficult index to control for artificial bezoar, was highly recognized by the sales agent.
The implementation of the whole project is relatively smooth, and there may be elements of luck, but behind this "luck", only the participants know how much effort and hardship they have put in. Cleaning the workshop equipment happens to be the hottest time. The weather has been more than 40 degrees for more than half a month, which makes the project team members unable to bear it. The workshop that has just been renovated is very dusty, but in order to ensure the cleaning quality, the air conditioner cannot be turned on, so it can only be cleaned under high temperature. Once out of the workshop, the whole person seems to have been soaked in water, and none of his body is dry. Moreover, his body is covered with dust. If there is something to do in the production workshop, he has to change clothes first.
Yan Xixia was impressed by one thing. The proportion and amount of balls in the ball mill will directly affect the product quality. For this reason, the two employees put 4 alumina balls of different sizes, totaling 2 tons, into small baskets one by one, and poured them into the ball mill with their bare hands for testing. The ball mill is large in size, and the feed port is above the machine. Employees holding the ball have to walk on a platform more than two meters high before they can pour in. If the ratio is not right, it has to be poured out again, cleaned, dried, and then poured in baskets again. This data alone has been tried for 3. four days. It goes up and down dozens of times a day. It is completely a physical job. Sometimes my hands shake after work. And sometimes afraid of miscounting the number of balls, employees squat down directly one by one.
Not only that, during the entire construction period from 4 to 7 February, Yu Chengfeng, Fang Weiming and Tang Songnian did not rest for a day and gave up their holidays. As long as the construction unit was present, they would have to be there. Finally, even the number of overtime days was not counted.
The end of the three batches of trial production products does not mean the end of this technological transformation project. They have a more important task, that is, to apply for GMP certification, and are now preparing for relevant materials. (Reporter Ni Yingzhen)
More information
July 1 is the anniversary of the founding of the Communist Party of China. The party committee of the group organized the party members of the group headquarters and the heads of the grassroots party organizations to go to Jinggangshan, the red holy land, to retake the revolutionary road taken by the ancestors and review the history of revolutionary struggle.
2023
07-11
The Party Committee of the Group organized a thematic education seminar to study
On June 27, the Party Committee of the Group Company organized an education seminar on the theme of studying and implementing Xi Jinping's thoughts on socialism with Chinese characteristics in the new era. Jiang Xinwang, a professor and master tutor of Zhejiang Normal University, explained the deployment requirements of economic work and Xi Jinping's economic thoughts in the report of the 20th National Congress of the Communist Party of China with the theme of "accelerating the construction of a new development pattern and promoting high-quality development.
2023
07-11
Jianfeng Pharmaceutical rehired Academician Wang Guangji as Chief Scientist
On April 30, Jiang Xiaomeng, chairman of the group company and chairman of Jianfeng Pharmaceutical Company, on behalf of Jianfeng Pharmaceutical Company, issued a letter of appointment to Professor Wang Guangji, academician of the Chinese Academy of Engineering, and renewed him as the chief scientist of the pharmaceutical company.
2023
05-11
Jinhua Development Conference and Wucheng Development Conference
On April 30 and May 1, the third Jinhua Development Conference and the second Wucheng Development Conference opened successively. Jiang Xiaomeng, secretary of the party committee and chairman of the group company, won two major awards at the "Jinhua Development Outstanding Achievement Award" and "Wucheng Development Merit Award" at the two conferences, and participated in the Jinhua Life and Health Industry Summit roundtable and other activities.
2023
05-11
Daye Peak Cement Company, National "Green Factory"!
The Ministry of Industry and Information Technology recently announced the 2022 national green manufacturing list, Daye Peak Cement Company successfully ranked among the national "green factories. Green manufacturing is also known as environmentally conscious manufacturing, that is, in the manufacturing process, a modern manufacturing model that comprehensively considers environmental impact and resource benefits. Its purpose is to use technical means to optimize manufacturing procedures, minimize the impact on the environment (negative effect), and resource utilization The highest rate, and the coordination and optimization of economic and social benefits of enterprises, so as to achieve the purpose of resource conservation and sustainable development. In recent years, with the rapid development of social economy, the state attaches great importance to the construction of ecological civilization and ecological environment protection, and further promoting the construction of green manufacturing system has become an important means to promote high-quality development and maintain green water and green mountains forever. As an important part of the green manufacturing system, the Ministry of Industry and Information Technology has organized and carried out the creation of national-level green factories since 2017, and has conducted nationwide selection. It is an authoritative recognition for companies that meet the "green development" and aims to improve my country's green Manufacturing system, comprehensive implementation of green manufacturing, and help the industrial sector achieve the goal of carbon peak and carbon neutrality, it is an important way to promote the structural optimization of various industries, to get out of trouble and upgrade, and to improve quality and efficiency. Green factory refers to the realization of land intensive, raw materials harmless, clean production, waste resources, energy low-carbon factories. As the production unit of the manufacturing industry, the factory is the main body of the implementation of green manufacturing, which belongs to the core support unit of the green manufacturing system, focusing on the greening of the production process. Over the years, Daye Jianfeng has been adhering to the concept of green and low-carbon development, making every effort to build a garden-style factory. Through formulating plans and subdividing targets, it has clearly defined the total energy consumption and pollutant emission targets, and through carrying out school-enterprise cooperation to promote industry-university-research, it has actively implemented the strategy of "carbon peak and carbon neutrality", invested a huge amount of funds every year for technological transformation, and successively implemented technological transformation projects such as electric bags and low-nitrogen combustion upgrading, take the lead in the application of emission reduction technologies such as wet desulfurization and precise denitrification in the cement industry in Hubei Province, and continue to promote energy conservation, consumption reduction, and emission reduction. After the technical transformation, the company can save 3000 tons of standard coal every year, reduce the intensity of carbon dioxide emissions by 3.6, improve the level of energy-saving and green environmental protection management, and achieve the goal of creating a green factory. Being rated as a national-level green factory is not only a high affirmation and encouragement of Daye Peak's adherence to green, low-carbon and innovative development, but also an opportunity for Daye Peak to further promote green development. The person in charge of Daye Peak said that in accordance with national requirements, local industrial and information authorities should strengthen the connection between the units listed in the green manufacturing list and relevant industrial policies, give full play to the demonstration role of point to area, lead the green transformation of the manufacturing industry in the region, strengthen tracking guidance and dynamic management, and review the key indicators specified in the dynamic management table, Daye Peak will be in the future work, we will continue to further promote the management of environmental protection, energy conservation and emission reduction, give full play to the leading role of green factories in benchmarking, make low-carbon energy conservation, green environmental protection and reduce energy consumption the main keynote of enterprise development, and make continuous efforts to promote the high-quality development of enterprises and local economy. (Junin)
2023
04-03
"Cement Economy 50 People Forum" Jiang Xiaomeng Talk about the Future Development of Cement Industry
On March 14, the "Cement Economy 50 Forum" hosted by China Cement Network was held in Hangzhou, inviting 50 influential economic figures in the cement industry to discuss the future development of China's cement industry. Jiang Xiaomeng, chairman of the group company, was invited to attend the forum to discuss the development of the cement industry with his peers. The theme of this forum is "strengthening confidence, seeking breakthrough, and promoting development". It aims to point out the disadvantages of "mud", actively provide suggestions for the competent departments, enterprise transformation and upgrading, strategic and tactical decision-making in the difficult period of the cement industry, and provide new think tank opinions and methods to help form a new cement economic ecology. In the context of the sharp decline in demand, the cement industry is trapped inside and outside, how to revive the glory? How do cement companies survive and develop next? Around these two topics, the guests at the meeting had a heated discussion. Jiang Xiaomeng pointed out in his speech at the forum that the development of any enterprise is inseparable from the healthy development of the industry. Only when the industry is good can the enterprise be good, and the interests of the industry are greater than the interests of the enterprise. In addition, the competition of similar enterprises should seek a breakthrough from the differentiation, and it is unreasonable to blindly pursue low prices. Industry synergy, industry synergy, supply, demand, price, to find a common price line, on the basis of competition and cooperation, from the management services, cost control and other aspects to highlight the advantages of enterprises. The participants reached consensus on many issues after heated discussions. It is generally believed that 2022 is the most complex year in the cement industry in the past decade, affected by the multi-point spread of the epidemic, real estate downturn and other factors, the cement market demand is sluggish, the contradiction between supply and demand is prominent, prices are falling rapidly, business difficulties, the pace of steady growth of the industry is blocked. Entering 2023, under the macroeconomic situation of stabilizing the economy and promoting development, as well as various regions stepping up efforts to promote the construction of major projects, cement demand is expected to increase in 2023 compared with 2022, and the situation in the second half of the year will be better than that in the first half. However, under the expectation of restorative growth in demand, the cement industry is still facing uncertainties such as continued bottoming of real estate, high energy costs, and overcapacity. In this regard, we should resolutely maintain the normal order of the industry, make concerted efforts to help the industry get out of the predicament, and firmly implement staggered peak production. Through mergers and acquisitions, carbon quotas, energy efficiency indicators, environmental protection indicators, coal indicators, market competition and other means to further resolve the contradiction of overcapacity, optimize the industrial layout, and adhere to innovation-driven in digital, intelligent and green development, so as to promote and finally realize the high-quality development of the cement industry. (this newspaper reporter)
2023
03-21
Contact Us
No. 88 Wujiang East Road, Jinhua City, Zhejiang Province, China
Tel: +86-579-82326868
Fax : +86-579-82324666
©2023 Zhejiang Jianfeng Group Co., Ltd. Powered by: www.300.cn SEO Business License
SAF Coolest v1.2 设置面板 SHJSS-AHDB-FSSQE-ZSW
无数据提示
Sorry, the current column has no content !
You can view other columns or return to Home Page