This is how the central plastic tube cable was born.
Release time:
2020-08-14
Central Plastic Tube Cable was born in this way
12# May 3 , Sunday, at 7 pm, Shenggao Cang, the cable company responsible for the distribution of goods, sent a red envelope in the employee WeChat group, and the group immediately became lively. The original cable company completed the equipment transformation and process design within 26 days at the request of the customer, and the central plastic tube type large logarithmic data cable produced was finally completed and delivered smoothly.
Nearly a month ago, I got the customer's sample. Its fine craftsmanship and design shocked the technicians of the cable company a little-the appearance of the sample line was extremely round, there was no wire strand on the surface of the sheath, and the wire pairs inside were all arranged around the central plastic pipe in standard concentric circles. The position of each pair of wires is fixed, one pair is opposite to the other, the inner layer and the outer layer are distinct, without any dislocation and strand jumping phenomenon; the shielded cable also considers the proximity effect of the line pair, the inner layer and the outer layer have different single-line structures, and the color spectrum also has special marks. This structure makes the performance of large logarithmic data cables very stable, and of course the production requirements are relatively high.
In the face of customer orders, the employees of the cable company are very worried. Because according to the current equipment situation, can not meet the production requirements, if you give up the order, the loss is not only sales, but also customers and the market. After careful consideration, Li Jinzhi, general manager of the cable company, made a decisive decision, took the order, and worked out a plan to transform the equipment before organizing production.
The delivery time required by the customer is only 26 days, which is very tight. Li Jinzhi invited equipment experts from Shanghai to study the equipment renovation plan together. The cable company also sent relevant technology, equipment and production personnel to the customer's factory twice to learn from the experience. Guo Zhijian, the monitor of the machine repair team, took part in the two studies. Although he was silent on weekdays, he had already made the idea of "stealing the teacher. Before the first departure, I had a comprehensive understanding of the idle equipment of the cable company. During the visit and study, I carefully considered the structure and performance of the other equipment, compared them, and determined the feasibility of equipment transformation. For the second time, further confirmation and communication were made, and the relevant data of the equipment were measured to ensure the accuracy after the transformation.
After a compact and sufficient demonstration, the renovation of the cable machine was carried out in full swing. For several machine mechanics in the workshop, the disassembly and assembly of idle machines were much more tiring than the installation and debugging of new machines. For a while, the machine broke down, for a while, the electrical cabinet tripped, for a while, and for a while there were parts that went wrong. The nerves of the masters were tested at any time.
The transformation of the pay-off frame and the determination of the mold size are the most critical links in this transformation. If there is no tension control of active pay-off, it is difficult to arrange the line pairs without jumping, and the mold size should be very accurate, so as to achieve the effect of positioning and shaping. If you want to buy an active pay-off rack, time and cost are both issues. Finally, the cable company uses the existing 26 head passive pay-off frame to control and adjust the tension to make it as uniform as possible, and uses the idle winding machine to ensure the roundness of the cable core.
When testing the machine, the problems were more obvious. The tension of the wire pair was uneven, the wire pair slipped out of the tension rod and was scratched. After the shutdown, the cable could not be effectively stopped, which led to the slack of the twisted wire... Problems followed one after another. In those days, the mechanic masters were all gray and oily all day, and they were busy back and forth. After many improvements and tests, a satisfactory sample was finally produced.
11 August 21 , the equipment renovation was finally completed, but it was less than half a month before the delivery date required by the customer. In order to ensure on-time delivery, the cable company held a special meeting to deploy the work tasks of various departments before delivery. The production department forced each process according to the construction period, and then deployed personnel according to the process arrangement. On the first day of formal production, the cable company also invited the customer's technical personnel to conduct on-site guidance.
In the following days, the cable company will mobilize the whole factory, with production personnel working 24 shifts, management personnel working at night, always paying attention to the production progress, and taking posts at any time in case of emergencies. In the past, most of the digital cabling posts were operated by one person, with 4 pairs of the following cables twisted. However, after the renovation, the central plastic pipe cabling post required two people to operate at the same time, with 25 pairs of the above cables twisted. The difficulty of the work increased and the manpower was obviously tense. According to the situation of each process, the workshop deployed personnel at any time to seize the progress. In order to ensure the stable operation of the machine, the eyes of the operators are always fixed on the machine and dare not relax for a moment. Such a high-intensity work, the day is good, the night shift is very difficult. To this end, the cable company prepared milk and snacks to increase nutrition for night shift personnel.
With the full cooperation of various departments, plates of colorful, round and bright central plastic tube type large logarithmic data cables successively walked off the production line. On the agreed delivery day of 12 April 3 , this batch of products were all produced and packaged according to the customer's requirements and ready for delivery. Cable company employees tense heart for nearly a month, finally relaxed.
The production of the central plastic tube large logarithmic data cable is an arduous test for the cable company. They have overcome all kinds of difficulties and realized their commitment to customers with their own efforts and wisdom and the spirit of perseverance and indomitable struggle. (lu chao-fang)
More information
July 1 is the anniversary of the founding of the Communist Party of China. The party committee of the group organized the party members of the group headquarters and the heads of the grassroots party organizations to go to Jinggangshan, the red holy land, to retake the revolutionary road taken by the ancestors and review the history of revolutionary struggle.
2023
07-11
The Party Committee of the Group organized a thematic education seminar to study
On June 27, the Party Committee of the Group Company organized an education seminar on the theme of studying and implementing Xi Jinping's thoughts on socialism with Chinese characteristics in the new era. Jiang Xinwang, a professor and master tutor of Zhejiang Normal University, explained the deployment requirements of economic work and Xi Jinping's economic thoughts in the report of the 20th National Congress of the Communist Party of China with the theme of "accelerating the construction of a new development pattern and promoting high-quality development.
2023
07-11
Jianfeng Pharmaceutical rehired Academician Wang Guangji as Chief Scientist
On April 30, Jiang Xiaomeng, chairman of the group company and chairman of Jianfeng Pharmaceutical Company, on behalf of Jianfeng Pharmaceutical Company, issued a letter of appointment to Professor Wang Guangji, academician of the Chinese Academy of Engineering, and renewed him as the chief scientist of the pharmaceutical company.
2023
05-11
Jinhua Development Conference and Wucheng Development Conference
On April 30 and May 1, the third Jinhua Development Conference and the second Wucheng Development Conference opened successively. Jiang Xiaomeng, secretary of the party committee and chairman of the group company, won two major awards at the "Jinhua Development Outstanding Achievement Award" and "Wucheng Development Merit Award" at the two conferences, and participated in the Jinhua Life and Health Industry Summit roundtable and other activities.
2023
05-11
Daye Peak Cement Company, National "Green Factory"!
The Ministry of Industry and Information Technology recently announced the 2022 national green manufacturing list, Daye Peak Cement Company successfully ranked among the national "green factories. Green manufacturing is also known as environmentally conscious manufacturing, that is, in the manufacturing process, a modern manufacturing model that comprehensively considers environmental impact and resource benefits. Its purpose is to use technical means to optimize manufacturing procedures, minimize the impact on the environment (negative effect), and resource utilization The highest rate, and the coordination and optimization of economic and social benefits of enterprises, so as to achieve the purpose of resource conservation and sustainable development. In recent years, with the rapid development of social economy, the state attaches great importance to the construction of ecological civilization and ecological environment protection, and further promoting the construction of green manufacturing system has become an important means to promote high-quality development and maintain green water and green mountains forever. As an important part of the green manufacturing system, the Ministry of Industry and Information Technology has organized and carried out the creation of national-level green factories since 2017, and has conducted nationwide selection. It is an authoritative recognition for companies that meet the "green development" and aims to improve my country's green Manufacturing system, comprehensive implementation of green manufacturing, and help the industrial sector achieve the goal of carbon peak and carbon neutrality, it is an important way to promote the structural optimization of various industries, to get out of trouble and upgrade, and to improve quality and efficiency. Green factory refers to the realization of land intensive, raw materials harmless, clean production, waste resources, energy low-carbon factories. As the production unit of the manufacturing industry, the factory is the main body of the implementation of green manufacturing, which belongs to the core support unit of the green manufacturing system, focusing on the greening of the production process. Over the years, Daye Jianfeng has been adhering to the concept of green and low-carbon development, making every effort to build a garden-style factory. Through formulating plans and subdividing targets, it has clearly defined the total energy consumption and pollutant emission targets, and through carrying out school-enterprise cooperation to promote industry-university-research, it has actively implemented the strategy of "carbon peak and carbon neutrality", invested a huge amount of funds every year for technological transformation, and successively implemented technological transformation projects such as electric bags and low-nitrogen combustion upgrading, take the lead in the application of emission reduction technologies such as wet desulfurization and precise denitrification in the cement industry in Hubei Province, and continue to promote energy conservation, consumption reduction, and emission reduction. After the technical transformation, the company can save 3000 tons of standard coal every year, reduce the intensity of carbon dioxide emissions by 3.6, improve the level of energy-saving and green environmental protection management, and achieve the goal of creating a green factory. Being rated as a national-level green factory is not only a high affirmation and encouragement of Daye Peak's adherence to green, low-carbon and innovative development, but also an opportunity for Daye Peak to further promote green development. The person in charge of Daye Peak said that in accordance with national requirements, local industrial and information authorities should strengthen the connection between the units listed in the green manufacturing list and relevant industrial policies, give full play to the demonstration role of point to area, lead the green transformation of the manufacturing industry in the region, strengthen tracking guidance and dynamic management, and review the key indicators specified in the dynamic management table, Daye Peak will be in the future work, we will continue to further promote the management of environmental protection, energy conservation and emission reduction, give full play to the leading role of green factories in benchmarking, make low-carbon energy conservation, green environmental protection and reduce energy consumption the main keynote of enterprise development, and make continuous efforts to promote the high-quality development of enterprises and local economy. (Junin)
2023
04-03
"Cement Economy 50 People Forum" Jiang Xiaomeng Talk about the Future Development of Cement Industry
On March 14, the "Cement Economy 50 Forum" hosted by China Cement Network was held in Hangzhou, inviting 50 influential economic figures in the cement industry to discuss the future development of China's cement industry. Jiang Xiaomeng, chairman of the group company, was invited to attend the forum to discuss the development of the cement industry with his peers. The theme of this forum is "strengthening confidence, seeking breakthrough, and promoting development". It aims to point out the disadvantages of "mud", actively provide suggestions for the competent departments, enterprise transformation and upgrading, strategic and tactical decision-making in the difficult period of the cement industry, and provide new think tank opinions and methods to help form a new cement economic ecology. In the context of the sharp decline in demand, the cement industry is trapped inside and outside, how to revive the glory? How do cement companies survive and develop next? Around these two topics, the guests at the meeting had a heated discussion. Jiang Xiaomeng pointed out in his speech at the forum that the development of any enterprise is inseparable from the healthy development of the industry. Only when the industry is good can the enterprise be good, and the interests of the industry are greater than the interests of the enterprise. In addition, the competition of similar enterprises should seek a breakthrough from the differentiation, and it is unreasonable to blindly pursue low prices. Industry synergy, industry synergy, supply, demand, price, to find a common price line, on the basis of competition and cooperation, from the management services, cost control and other aspects to highlight the advantages of enterprises. The participants reached consensus on many issues after heated discussions. It is generally believed that 2022 is the most complex year in the cement industry in the past decade, affected by the multi-point spread of the epidemic, real estate downturn and other factors, the cement market demand is sluggish, the contradiction between supply and demand is prominent, prices are falling rapidly, business difficulties, the pace of steady growth of the industry is blocked. Entering 2023, under the macroeconomic situation of stabilizing the economy and promoting development, as well as various regions stepping up efforts to promote the construction of major projects, cement demand is expected to increase in 2023 compared with 2022, and the situation in the second half of the year will be better than that in the first half. However, under the expectation of restorative growth in demand, the cement industry is still facing uncertainties such as continued bottoming of real estate, high energy costs, and overcapacity. In this regard, we should resolutely maintain the normal order of the industry, make concerted efforts to help the industry get out of the predicament, and firmly implement staggered peak production. Through mergers and acquisitions, carbon quotas, energy efficiency indicators, environmental protection indicators, coal indicators, market competition and other means to further resolve the contradiction of overcapacity, optimize the industrial layout, and adhere to innovation-driven in digital, intelligent and green development, so as to promote and finally realize the high-quality development of the cement industry. (this newspaper reporter)
2023
03-21
Contact Us
No. 88 Wujiang East Road, Jinhua City, Zhejiang Province, China
Tel: +86-579-82326868
Fax : +86-579-82324666
©2023 Zhejiang Jianfeng Group Co., Ltd. Powered by: www.300.cn SEO Business License
SAF Coolest v1.2 设置面板 SHJSS-AHDB-FSSQE-ZSW
无数据提示
Sorry, the current column has no content !
You can view other columns or return to Home Page