The intelligent promotion project of pharmaceutical company was listed in the "new intelligent manufacturing" benchmark enterprise cultivation library.
Release time:
2021-12-23
"new intelligent building " enterprise cultivation library project of Jinhua economic and technological development zone, and was officially included in the benchmark enterprise cultivation library of the future factory "new intelligent building " of the development zone in 2021 . "New Wisdom Building
"Project is a project carried out by Jinhua Economic and Technological Development Zone to implement the deployment requirements of digital reform in Zhejiang Province, establish and improve the promotion mechanism, accelerate the deep integration of new generation information technology and manufacturing industry, effectively stimulate the vitality of innovation and development, create a new manufacturing group led by "Future Factory " , and promote the transformation and upgrading of traditional industries. The enterprises participating in the declaration should be industrial enterprises registered and established in the development zone according to law. The application project should have the characteristics of advanced technology, great market potential, strong demonstration and driving effect, and strong industry representation. It can be recommended or declared by the township (street). The Economic Development Bureau of the Development Zone will set up and review the cultivation projects, The key cultivation projects are classified and cultivated according to the future factory, intelligent factory and digital workshop. Successful enterprises shall organize and implement pilot tasks according to the requirements, carry out the task of gathering intelligence and gathering strength to tackle key problems and create tasks. After the completion of the project implementation, they shall conduct assessment and acceptance according to the requirements of the acceptance evaluation index system. The project declared by the pharmaceutical company this time is intelligent production. The main body of the project will fully implement
DCS/SISsystem in the bulk drug workshop of Jinxi Base. Implement BMS/EMS system in clean workshop, build SCADA system and quality review and analysis system, and optimize the existing MES system, at the same time, the construction of integrated management and control platform integration to enhance the existing security and human vehicle management system. After the implementation of this project, the operation cost can be reduced. Through the implementation of automatic control, the control of reaction conditions can be more accurate, the conversion rate of materials can be improved, and the amount of waste generated can not only reduce the production cost, but also reduce the environmental protection treatment cost. The product development cycle is shortened, which is conducive to the compliance trial production of clinical samples, the high automation of chemical process and the real-time recording of parameters, and the authenticity of process data are ensured, it is conducive to the determination of various process parameters in the research and development stage and will greatly speed up the progress of product research and development. It is conducive to scientific control, scientific allocation of production factors through setting production scheduling plan, equipment management, SCADA system production whole process monitoring, etc., and comprehensively reduces the labor cost of enterprise production and management through automatic, intelligent and systematic production management. At the same time, it provides various auxiliary reports and provides data support for decision-making for management. The implementation of DCS and SIS systems can improve the degree of production automation, reduce on-site operators, meet the high-end requirements of industry safety supervision, and reduce potential production hidden dangers and various safety hidden dangers through real-time monitoring of production links, alarm of abnormal production points, and fire control of the whole plant, thus significantly improving the guarantee level of enterprise production safety. In the process of process production, the control of automatic system is fully guaranteed, which avoids the mistakes and deviations of human operation to the greatest extent. Through the monitoring and statistical analysis of production energy consumption, the energy consumption of standard products and industry energy consumption is matched, and the potential of energy saving is tapped, which is conducive to reducing the energy consumption of production, thus reducing the production cost of enterprises. It is understood that the project will be implemented on the basis of planning and detailing each module, and the installation and debugging of
DCS, SIS , BMS and EMS systems will be completed in the later period. Other modules will be timely carried out according to the overall progress requirements, and the overall operation of SCADA system will be finally completed, project acceptance is planned for the fourth quarter of 2022 . (Yu Xun Song Shijie)
More information
July 1 is the anniversary of the founding of the Communist Party of China. The party committee of the group organized the party members of the group headquarters and the heads of the grassroots party organizations to go to Jinggangshan, the red holy land, to retake the revolutionary road taken by the ancestors and review the history of revolutionary struggle.
2023
07-11
The Party Committee of the Group organized a thematic education seminar to study
On June 27, the Party Committee of the Group Company organized an education seminar on the theme of studying and implementing Xi Jinping's thoughts on socialism with Chinese characteristics in the new era. Jiang Xinwang, a professor and master tutor of Zhejiang Normal University, explained the deployment requirements of economic work and Xi Jinping's economic thoughts in the report of the 20th National Congress of the Communist Party of China with the theme of "accelerating the construction of a new development pattern and promoting high-quality development.
2023
07-11
Jianfeng Pharmaceutical rehired Academician Wang Guangji as Chief Scientist
On April 30, Jiang Xiaomeng, chairman of the group company and chairman of Jianfeng Pharmaceutical Company, on behalf of Jianfeng Pharmaceutical Company, issued a letter of appointment to Professor Wang Guangji, academician of the Chinese Academy of Engineering, and renewed him as the chief scientist of the pharmaceutical company.
2023
05-11
Jinhua Development Conference and Wucheng Development Conference
On April 30 and May 1, the third Jinhua Development Conference and the second Wucheng Development Conference opened successively. Jiang Xiaomeng, secretary of the party committee and chairman of the group company, won two major awards at the "Jinhua Development Outstanding Achievement Award" and "Wucheng Development Merit Award" at the two conferences, and participated in the Jinhua Life and Health Industry Summit roundtable and other activities.
2023
05-11
Daye Peak Cement Company, National "Green Factory"!
The Ministry of Industry and Information Technology recently announced the 2022 national green manufacturing list, Daye Peak Cement Company successfully ranked among the national "green factories. Green manufacturing is also known as environmentally conscious manufacturing, that is, in the manufacturing process, a modern manufacturing model that comprehensively considers environmental impact and resource benefits. Its purpose is to use technical means to optimize manufacturing procedures, minimize the impact on the environment (negative effect), and resource utilization The highest rate, and the coordination and optimization of economic and social benefits of enterprises, so as to achieve the purpose of resource conservation and sustainable development. In recent years, with the rapid development of social economy, the state attaches great importance to the construction of ecological civilization and ecological environment protection, and further promoting the construction of green manufacturing system has become an important means to promote high-quality development and maintain green water and green mountains forever. As an important part of the green manufacturing system, the Ministry of Industry and Information Technology has organized and carried out the creation of national-level green factories since 2017, and has conducted nationwide selection. It is an authoritative recognition for companies that meet the "green development" and aims to improve my country's green Manufacturing system, comprehensive implementation of green manufacturing, and help the industrial sector achieve the goal of carbon peak and carbon neutrality, it is an important way to promote the structural optimization of various industries, to get out of trouble and upgrade, and to improve quality and efficiency. Green factory refers to the realization of land intensive, raw materials harmless, clean production, waste resources, energy low-carbon factories. As the production unit of the manufacturing industry, the factory is the main body of the implementation of green manufacturing, which belongs to the core support unit of the green manufacturing system, focusing on the greening of the production process. Over the years, Daye Jianfeng has been adhering to the concept of green and low-carbon development, making every effort to build a garden-style factory. Through formulating plans and subdividing targets, it has clearly defined the total energy consumption and pollutant emission targets, and through carrying out school-enterprise cooperation to promote industry-university-research, it has actively implemented the strategy of "carbon peak and carbon neutrality", invested a huge amount of funds every year for technological transformation, and successively implemented technological transformation projects such as electric bags and low-nitrogen combustion upgrading, take the lead in the application of emission reduction technologies such as wet desulfurization and precise denitrification in the cement industry in Hubei Province, and continue to promote energy conservation, consumption reduction, and emission reduction. After the technical transformation, the company can save 3000 tons of standard coal every year, reduce the intensity of carbon dioxide emissions by 3.6, improve the level of energy-saving and green environmental protection management, and achieve the goal of creating a green factory. Being rated as a national-level green factory is not only a high affirmation and encouragement of Daye Peak's adherence to green, low-carbon and innovative development, but also an opportunity for Daye Peak to further promote green development. The person in charge of Daye Peak said that in accordance with national requirements, local industrial and information authorities should strengthen the connection between the units listed in the green manufacturing list and relevant industrial policies, give full play to the demonstration role of point to area, lead the green transformation of the manufacturing industry in the region, strengthen tracking guidance and dynamic management, and review the key indicators specified in the dynamic management table, Daye Peak will be in the future work, we will continue to further promote the management of environmental protection, energy conservation and emission reduction, give full play to the leading role of green factories in benchmarking, make low-carbon energy conservation, green environmental protection and reduce energy consumption the main keynote of enterprise development, and make continuous efforts to promote the high-quality development of enterprises and local economy. (Junin)
2023
04-03
"Cement Economy 50 People Forum" Jiang Xiaomeng Talk about the Future Development of Cement Industry
On March 14, the "Cement Economy 50 Forum" hosted by China Cement Network was held in Hangzhou, inviting 50 influential economic figures in the cement industry to discuss the future development of China's cement industry. Jiang Xiaomeng, chairman of the group company, was invited to attend the forum to discuss the development of the cement industry with his peers. The theme of this forum is "strengthening confidence, seeking breakthrough, and promoting development". It aims to point out the disadvantages of "mud", actively provide suggestions for the competent departments, enterprise transformation and upgrading, strategic and tactical decision-making in the difficult period of the cement industry, and provide new think tank opinions and methods to help form a new cement economic ecology. In the context of the sharp decline in demand, the cement industry is trapped inside and outside, how to revive the glory? How do cement companies survive and develop next? Around these two topics, the guests at the meeting had a heated discussion. Jiang Xiaomeng pointed out in his speech at the forum that the development of any enterprise is inseparable from the healthy development of the industry. Only when the industry is good can the enterprise be good, and the interests of the industry are greater than the interests of the enterprise. In addition, the competition of similar enterprises should seek a breakthrough from the differentiation, and it is unreasonable to blindly pursue low prices. Industry synergy, industry synergy, supply, demand, price, to find a common price line, on the basis of competition and cooperation, from the management services, cost control and other aspects to highlight the advantages of enterprises. The participants reached consensus on many issues after heated discussions. It is generally believed that 2022 is the most complex year in the cement industry in the past decade, affected by the multi-point spread of the epidemic, real estate downturn and other factors, the cement market demand is sluggish, the contradiction between supply and demand is prominent, prices are falling rapidly, business difficulties, the pace of steady growth of the industry is blocked. Entering 2023, under the macroeconomic situation of stabilizing the economy and promoting development, as well as various regions stepping up efforts to promote the construction of major projects, cement demand is expected to increase in 2023 compared with 2022, and the situation in the second half of the year will be better than that in the first half. However, under the expectation of restorative growth in demand, the cement industry is still facing uncertainties such as continued bottoming of real estate, high energy costs, and overcapacity. In this regard, we should resolutely maintain the normal order of the industry, make concerted efforts to help the industry get out of the predicament, and firmly implement staggered peak production. Through mergers and acquisitions, carbon quotas, energy efficiency indicators, environmental protection indicators, coal indicators, market competition and other means to further resolve the contradiction of overcapacity, optimize the industrial layout, and adhere to innovation-driven in digital, intelligent and green development, so as to promote and finally realize the high-quality development of the cement industry. (this newspaper reporter)
2023
03-21