We go to the audit
Release time:
2020-07-22
We went to audit
# May 17 -19 . As a member of the supplier audit team, I visited Changzhou Ruiming, Wuxi Yangjian Huaqiang, Suzhou Haishun, Zhejiang Duoling Pharmaceutical Packaging and other companies with my colleagues and conducted a series of audit work.
As one of the key elements of production, the quality and stability of raw materials and auxiliary materials directly determine the stability of the final product quality. In order to ensure the stability of product quality, our manufacturers conduct supplier audits of raw and auxiliary package suppliers every year. This is an on-site audit, including verifying the authenticity of the supplier's qualification documents and inspection reports, whether they have inspection conditions, etc., as well as reviewing its personnel structure, plant facilities and equipment, material management, production process and production management, and quality control laboratory equipment, instruments, document management, etc.
This is my first time to participate in the audit, although I made a corresponding inspection plan for the basic situation of all the suppliers to be inspected before departure. However, once you arrive at the scene, you will still be nervous and do not know where to start. With the warm reception of the representatives of the supply side, our audit work was carried out in an orderly manner.
First of all, we went to the manufacturers of raw materials and chemical raw materials. Before entering the production area, the reception staff of the other party gave us full oral safety education and issued safety helmets, demonstrating the safety awareness that a chemical plant should have. Their production area and office area have obvious regional isolation, effectively avoid cross-contamination. However, some parts of the production site are not doing very well. For example, the unloading position of the raw materials delivered from the warehouse is too random, which is just the place where solar energy is exposed. The label of the raw materials during feeding was removed in advance. In contrast, our factory has done a better job of on-site management. When the raw materials come, there will also be a special unloading position. The labels of the materials will be on the materials until the end of feeding, so as to avoid confusion. We raised these issues with the manufacturer, and the other party accepted them modestly, dealt with them in a timely manner, and said that they would provide rectification reports after all rectifications.
may be an old customer. The manufacturers of composite film (bag) and aluminum foil for drug packaging are a little too casual in reception. We arrived at the factory on the same day but could not find the reception staff. On the spot, there is a sharp contrast between the packaging material manufacturers and our pharmaceutical companies. Although they are also in the D area, their spot is slightly messy and their concept of clearing the spot is somewhat vague. Due to continuous production, the equipment site is easy to leave materials, and the lack of fixed position is slightly messy. They also made rectification immediately after the site was put forward. For our pharmaceutical factory, it is also necessary to change what we have and encourage what we have not.
The third enterprise we went to is a large listed company. Not only can the production and inspection equipment meet the production and inspection requirements, but also the production line is fully automatic production of industry 4.0 , which is fully automated from equipment operation, material and product transportation. In the workshop, the quality of products is also monitored in real time through the central control room, and the positioning of various items is also standardized. The warehouse is a 4 -storey three-dimensional library, which realizes unmanned operation. Their laboratory even has a separate aluminum plastic machine to do challenging experiments, reflecting their pursuit of product quality excellence. All these are worth learning. The wave of industrial automation upgrading is constantly advancing. Although we have not yet entered that stage, we must always maintain our own improvement to meet this wave.
The last company is an enterprise that produces PVC medicinal hard tablets and various composite hard tablets and composite high-barrier packaging materials. Our host is their QC supervisor. To my surprise, their supervisor QC was born in a health school and took part in the inspection work, but he was quite familiar with their process flow and process parameters. This also makes us realize that no matter what position we are in, we should actively learn what we can come into contact with, especially for the process flow and process parameters in production, showing a kind of professionalism for our own industry. During the audit, we found that their workshop also has a special access to visit, each door has access control, for access control is very good. This is where we can learn from. For a workshop, access control is very important, which can effectively avoid problems such as personnel stringing and pollution.
As a production enterprise, our pharmaceutical factory also accepts the audit of our customers every year. Through this rare audit opportunity, I can look at the supplier from the customer's point of view, from which I can objectively see many problems in daily work and production. The first point is that for the reception of customers, special personnel and sufficient relevant information can make customers have a good impression on us; on the production site, various small details determine the quality of the product and whether the production process meets the customer's standards; records and various inspection reports show the true quality of the product. Taking the essence and removing the dross, we will apply the experience gained during this audit to our daily production work, which will certainly give a great impetus to our future work. (Zheng Nan)
More information
July 1 is the anniversary of the founding of the Communist Party of China. The party committee of the group organized the party members of the group headquarters and the heads of the grassroots party organizations to go to Jinggangshan, the red holy land, to retake the revolutionary road taken by the ancestors and review the history of revolutionary struggle.
2023
07-11
The Party Committee of the Group organized a thematic education seminar to study
On June 27, the Party Committee of the Group Company organized an education seminar on the theme of studying and implementing Xi Jinping's thoughts on socialism with Chinese characteristics in the new era. Jiang Xinwang, a professor and master tutor of Zhejiang Normal University, explained the deployment requirements of economic work and Xi Jinping's economic thoughts in the report of the 20th National Congress of the Communist Party of China with the theme of "accelerating the construction of a new development pattern and promoting high-quality development.
2023
07-11
Jianfeng Pharmaceutical rehired Academician Wang Guangji as Chief Scientist
On April 30, Jiang Xiaomeng, chairman of the group company and chairman of Jianfeng Pharmaceutical Company, on behalf of Jianfeng Pharmaceutical Company, issued a letter of appointment to Professor Wang Guangji, academician of the Chinese Academy of Engineering, and renewed him as the chief scientist of the pharmaceutical company.
2023
05-11
Jinhua Development Conference and Wucheng Development Conference
On April 30 and May 1, the third Jinhua Development Conference and the second Wucheng Development Conference opened successively. Jiang Xiaomeng, secretary of the party committee and chairman of the group company, won two major awards at the "Jinhua Development Outstanding Achievement Award" and "Wucheng Development Merit Award" at the two conferences, and participated in the Jinhua Life and Health Industry Summit roundtable and other activities.
2023
05-11
Daye Peak Cement Company, National "Green Factory"!
The Ministry of Industry and Information Technology recently announced the 2022 national green manufacturing list, Daye Peak Cement Company successfully ranked among the national "green factories. Green manufacturing is also known as environmentally conscious manufacturing, that is, in the manufacturing process, a modern manufacturing model that comprehensively considers environmental impact and resource benefits. Its purpose is to use technical means to optimize manufacturing procedures, minimize the impact on the environment (negative effect), and resource utilization The highest rate, and the coordination and optimization of economic and social benefits of enterprises, so as to achieve the purpose of resource conservation and sustainable development. In recent years, with the rapid development of social economy, the state attaches great importance to the construction of ecological civilization and ecological environment protection, and further promoting the construction of green manufacturing system has become an important means to promote high-quality development and maintain green water and green mountains forever. As an important part of the green manufacturing system, the Ministry of Industry and Information Technology has organized and carried out the creation of national-level green factories since 2017, and has conducted nationwide selection. It is an authoritative recognition for companies that meet the "green development" and aims to improve my country's green Manufacturing system, comprehensive implementation of green manufacturing, and help the industrial sector achieve the goal of carbon peak and carbon neutrality, it is an important way to promote the structural optimization of various industries, to get out of trouble and upgrade, and to improve quality and efficiency. Green factory refers to the realization of land intensive, raw materials harmless, clean production, waste resources, energy low-carbon factories. As the production unit of the manufacturing industry, the factory is the main body of the implementation of green manufacturing, which belongs to the core support unit of the green manufacturing system, focusing on the greening of the production process. Over the years, Daye Jianfeng has been adhering to the concept of green and low-carbon development, making every effort to build a garden-style factory. Through formulating plans and subdividing targets, it has clearly defined the total energy consumption and pollutant emission targets, and through carrying out school-enterprise cooperation to promote industry-university-research, it has actively implemented the strategy of "carbon peak and carbon neutrality", invested a huge amount of funds every year for technological transformation, and successively implemented technological transformation projects such as electric bags and low-nitrogen combustion upgrading, take the lead in the application of emission reduction technologies such as wet desulfurization and precise denitrification in the cement industry in Hubei Province, and continue to promote energy conservation, consumption reduction, and emission reduction. After the technical transformation, the company can save 3000 tons of standard coal every year, reduce the intensity of carbon dioxide emissions by 3.6, improve the level of energy-saving and green environmental protection management, and achieve the goal of creating a green factory. Being rated as a national-level green factory is not only a high affirmation and encouragement of Daye Peak's adherence to green, low-carbon and innovative development, but also an opportunity for Daye Peak to further promote green development. The person in charge of Daye Peak said that in accordance with national requirements, local industrial and information authorities should strengthen the connection between the units listed in the green manufacturing list and relevant industrial policies, give full play to the demonstration role of point to area, lead the green transformation of the manufacturing industry in the region, strengthen tracking guidance and dynamic management, and review the key indicators specified in the dynamic management table, Daye Peak will be in the future work, we will continue to further promote the management of environmental protection, energy conservation and emission reduction, give full play to the leading role of green factories in benchmarking, make low-carbon energy conservation, green environmental protection and reduce energy consumption the main keynote of enterprise development, and make continuous efforts to promote the high-quality development of enterprises and local economy. (Junin)
2023
04-03
"Cement Economy 50 People Forum" Jiang Xiaomeng Talk about the Future Development of Cement Industry
On March 14, the "Cement Economy 50 Forum" hosted by China Cement Network was held in Hangzhou, inviting 50 influential economic figures in the cement industry to discuss the future development of China's cement industry. Jiang Xiaomeng, chairman of the group company, was invited to attend the forum to discuss the development of the cement industry with his peers. The theme of this forum is "strengthening confidence, seeking breakthrough, and promoting development". It aims to point out the disadvantages of "mud", actively provide suggestions for the competent departments, enterprise transformation and upgrading, strategic and tactical decision-making in the difficult period of the cement industry, and provide new think tank opinions and methods to help form a new cement economic ecology. In the context of the sharp decline in demand, the cement industry is trapped inside and outside, how to revive the glory? How do cement companies survive and develop next? Around these two topics, the guests at the meeting had a heated discussion. Jiang Xiaomeng pointed out in his speech at the forum that the development of any enterprise is inseparable from the healthy development of the industry. Only when the industry is good can the enterprise be good, and the interests of the industry are greater than the interests of the enterprise. In addition, the competition of similar enterprises should seek a breakthrough from the differentiation, and it is unreasonable to blindly pursue low prices. Industry synergy, industry synergy, supply, demand, price, to find a common price line, on the basis of competition and cooperation, from the management services, cost control and other aspects to highlight the advantages of enterprises. The participants reached consensus on many issues after heated discussions. It is generally believed that 2022 is the most complex year in the cement industry in the past decade, affected by the multi-point spread of the epidemic, real estate downturn and other factors, the cement market demand is sluggish, the contradiction between supply and demand is prominent, prices are falling rapidly, business difficulties, the pace of steady growth of the industry is blocked. Entering 2023, under the macroeconomic situation of stabilizing the economy and promoting development, as well as various regions stepping up efforts to promote the construction of major projects, cement demand is expected to increase in 2023 compared with 2022, and the situation in the second half of the year will be better than that in the first half. However, under the expectation of restorative growth in demand, the cement industry is still facing uncertainties such as continued bottoming of real estate, high energy costs, and overcapacity. In this regard, we should resolutely maintain the normal order of the industry, make concerted efforts to help the industry get out of the predicament, and firmly implement staggered peak production. Through mergers and acquisitions, carbon quotas, energy efficiency indicators, environmental protection indicators, coal indicators, market competition and other means to further resolve the contradiction of overcapacity, optimize the industrial layout, and adhere to innovation-driven in digital, intelligent and green development, so as to promote and finally realize the high-quality development of the cement industry. (this newspaper reporter)
2023
03-21
Contact Us
No. 88 Wujiang East Road, Jinhua City, Zhejiang Province, China
Tel: +86-579-82326868
Fax : +86-579-82324666
©2023 Zhejiang Jianfeng Group Co., Ltd. Powered by: www.300.cn SEO Business License
SAF Coolest v1.2 设置面板 SHJSS-AHDB-FSSQE-ZSW
无数据提示
Sorry, the current column has no content !
You can view other columns or return to Home Page