Practice Experience of Manufacturing Department
Release time:
2023-03-21
As a staff member of Huang Ping Peak Marketing Department, I learned the production process and product shipment in the manufacturing department last August, which was divided into three stages.
Phase I: The Environmental Security Department organized us to carry out cross-departmental transfer safety learning, and the Manufacturing Department conducted production safety education and learning. Safety education was carried out on the illegal phenomena and safety accidents that often occur at the operation site, which made me understand the prevention knowledge of safety accidents, cases such as occupational injury factors and on-site safety operation requirements. I should dress strictly according to the production requirements.
Phase II: Be familiar with the performance and process of each equipment and understand the role of relevant raw materials in production during equipment maintenance. During the kiln ignition production, I followed the shift to understand the actual production, which links and deviations have an impact on the quality of clinker and cement and the corresponding emergency treatment measures. For example, in the process of cement clinker production, limestone, sandstone, leaf rock, clay, iron and other raw materials are required according to the batching requirements. After being measured by belt weighing, preliminary detection and feedback are carried out through cross-belt online analyzer to the measuring scale for dynamic fine adjustment, they enter the raw material roller for grinding according to the control standard, providing the basis for kiln calcination. After metering, the raw coal enters the coal vertical mill for grinding, and the quality control requirements of the mill are adjusted in time according to the characteristics of the coal and the calcination of the kiln, so as to facilitate the calcination of the kiln. In addition, the raw meal homogenized in the raw meal homogenization warehouse is metered and transported to the preheater for step-by-step preheating, decomposition and collection into the kiln. The decomposed material undergoes calcination in the rotary kiln to form qualified clinker and then enters the grate cooler for cooling. The key to cooling is to ensure that the quality of the clinker does not change, and once again the waste heat recovery and utilization. The cooled clinker is stored in the clinker warehouse to prepare for cement grinding. This is the clinker production process in the two grinding a burning. And cement grinding is cement manufacturing cement grinding is the final process of cement manufacturing, but also the most power consumption process. The production process for the cement clinker, desulfurization gypsum, grinding aids, fly ash, coal gangue and other materials according to the requirements of the measurement with grinding products to meet the market demand, the main control indicators are fineness, specific surface area, setting time, strength and so on.
Phase III: Cement delivery is also divided into three points. The first is to understand the significance of cement multi-point alternate feeding, the second is to be familiar with the cement delivery process, cement coding and spray code control, and finally to understand the work flow and function of production equipment.
After the 24-day production practice, I have a deeper understanding of the basic knowledge of cement production. Through the practical study of the technological process and mechanical equipment of the new dry cement production, I am more familiar with the characteristics and quality advantages of the products. This internship is to improve my comprehensive ability, strengthen my understanding of quality, improve the ability to work, but also understand the production will be applied to the new process, new technology, new equipment. At the same time to improve and strengthen the sense of teamwork, collaboration is the basis for the successful completion of the work. (Le Chao Chao)
More information
2020
11-03
Jinhua Municipal Party Committee Secretary Chen Long: I wish your enterprise better and better
On the morning of October 16, Chen long, secretary of the Jinhua Municipal CPC Committee, and his entourage came to the construction site of Jianfeng Pharmaceutical's internationalization project to investigate and affirmed the good development status and clear future development ideas of Jianfeng Pharmaceutical. At the construction site, Jiang Xiaomeng, chairman of the group company and chairman of the pharmaceutical company, introduced the overall situation of the investment scale, factory layout, and production direction of the Jianfeng Pharmaceutical internationalization project to Chen Long and his entourage. Huang Jinlong, general manager of the pharmaceutical company, accompanied Chen Long and his entourage to visit the preparation workshop under construction. The construction site is neat, tidy and orderly, and the facilities and equipment are perfect and advanced, all have been unanimously affirmed by the leaders who came to investigate. When learning that the peak internationalization project has introduced international advanced equipment, built in accordance with European and American standards, and its products are oriented to the international market, Chen long said happily: "your goals are very clear and your thinking is very clear. I wish your enterprise better and better!" (this newspaper reporter)
2020
10-23
Liu Haiping, vice mayor of Pu'er City, said during the survey: "Peak is an enterprise with feelings"
On September 30, Liu Haiping, member of the standing Committee of the Pu'er Municipal CPC Committee and vice mayor of Pu'er City, Yunnan Province, and relevant responsible persons of Pu'er City and Simao District, visited the company for investigation and research, and communicated with the leaders of the group company on topics such as further strengthening cooperation between the two sides. "Yunnan Jianfeng has not only developed well in Pu'er these years, achieved good benefits and contributed considerable tax revenue, but also made great contributions to promoting the economic development of Pu'er and the stability of the southwest border region. It is our 'star enterprise' and 'baby enterprise '." Liu Haiping said so in the exchange. He said that Pu'er is an important window for the implementation of the "Belt and Road" concept. It has good conditions in natural resources, transportation, electricity, etc., and the peak is a "sentimental enterprise" and has a good foundation in the local area. Strengthen cooperation; various government departments will also earnestly "stand on the platform" and "do a good job as a shopkeeper" to serve enterprises. Chairman Jiang Xiaomeng and General Manager Yu Jianhong exchanged views with Liu Haiping and his party on the layout of peak industry and strengthening cooperation with Pu 'er. After that, accompanied by General Manager Yu Jianhong and Deputy General Manager Huang Jinlong, Liu Haiping and his party visited the Jinxi Factory of Jianfeng Pharmaceutical Factory. (this newspaper reporter)
2020
10-09
The first batch of Jianfeng Pharmaceuticals to enter Jinhua (Shanghai) Science and Technology Center
News from our newspaper On September 16, at the unveiling ceremony of the Yangtze River Delta G60 Jinhua (Shanghai) Science and Technology Innovation Center and Jinhua (Shanghai) Talent Building, Jiang Xiaomeng, chairman of the group company and chairman of the pharmaceutical company, took over from Chen Long, secretary of the Jinhua Municipal Party Committee. The golden key with big red flowers. Spike Pharmaceuticals became one of the first seven companies to enter the center. The Yangtze River Delta G60 Jinhua (Shanghai) Science and Technology Center and Jinhua (Shanghai) Talent Building are the first "Science and Technology and Talent Enclave" in Shanghai in the nine cities of the Yangtze River Delta G60 Science and Technology Corridor, and the first cross-regional industrial collaborative innovation center in the Science and Technology Corridor. The center is located in Shanghai Lingang Songjiang Science and Technology City, with a total area of nearly 10,000 square meters. It includes two parts: science and technology innovation and talent service. There are five major centers, including talent service center, science and technology innovation exhibition center, business incubation center, enterprise research and development center, and talent project roadshow center. It is a science and technology innovation platform that integrates the functions of project incubation, recruitment of institutions, and talent recruitment. Chen Long, secretary of the Jinhua Municipal Party Committee, said in his speech at the unveiling ceremony that in the future, all scientific and technological enterprises stationed in Jinhua (Shanghai) Science and Technology Center and Talent Building can equally enjoy Jinhua's local science and technology and talent policies, so as to further break the space limitation, enable talents from the two places to share the most favorable treatment and convenient services, help enterprises to develop in Shanghai and achieve industrialization in Jinhua. At the ceremony, leaders such as Chen Long, secretary of the Jinhua Municipal Party Committee, and Cheng Xiangmin, secretary of the Shanghai Songjiang District Party Committee, awarded seven companies, including Jianfeng Pharmaceutical, the golden key to symbolize their entry. At the Yangtze River Delta Integrated Talent Cooperation Project Symposium held after the ceremony, Jiang Xiaomeng spoke as a representative of Jinhua entrepreneurs. He believed that Shanghai, as an international metropolis, has an agglomeration effect on high-end intellectual resources and grasps the first-class element resources of scientific and technological innovation in China and even the world. The establishment of G60 Jinhua (Shanghai) science and technology innovation center and talent building in the Yangtze River Delta helps Jinhua enterprises to take off in scientific and technological innovation and information exchange, which will provide strong and continuous scientific and technological support and intellectual support for the long-term development of enterprises in the future, and attract more excellent domestic and foreign talents to serve Jinhua enterprises, It plays a key role in further improving scientific research ability, innovation ability and personnel training. During the event, Jiang Xiaomeng successively accepted on-site interviews with "People's Daily", "Liberation Daily", "Zhejiang Daily" and other media. He said that the establishment of science and technology innovation and talent bases in Shanghai has greatly enhanced Jinhua's attractiveness to enterprises. "With this base, we don't need to introduce talents to Jinhua, but directly recruit talents in Shanghai, and at the same time enjoy Jinhua's various talent recruitment policies, and change Shanghai talents to Jinhua's use. This is a kind of bold. The innovation has greatly solved the dilemma of attracting talents for enterprises." As a settled enterprise, it will also make full use of its own advantages to continuously inject resource vitality into the science and technology innovation center, and continue to contribute to the long-term development of Jinhua's economy. (this newspaper reporter)
2020
09-22
Spike Pharmaceutical Added New Products
On September 3, Spike Pharmaceutical Company received the approval of the State Drug Administration for the registration of esomeprazole sodium for injection (approval number: 2020S00572). Esomeprazole sodium for injection is mainly used to treat low-risk patients with gastroesophageal reflux disease and acute gastric or duodenal ulcer bleeding when oral therapy is not applicable. It has been listed in the National Basic Medical Insurance, Work Injury Insurance and Maternity Insurance Drug List (2017 Edition) ", classified as Class B. According to industry statistics, 30 companies including Zhengda Tianqing and Qilu Pharmaceutical have been approved for listing in China. In 2019, domestic sales (including urban and county-level public hospitals, community and township health centers) were about 3.317 billion yuan. Jianfeng Pharmaceutical submitted an application for registration of esomeprazole sodium for injection to the State Food and Drug Administration in November 2013 and was accepted. Up to now, Jianfeng Pharmaceutical has invested nearly 15 million yuan in research and development for the project and has a corresponding production line. This time to obtain the injection of esomeprazole sodium drug registration approval, marking the peak pharmaceutical has the drug production, sales qualification, will further enrich the peak pharmaceutical product line, help to enhance the competitiveness of the peak pharmaceutical business. (Lu Yating, Liu Yang)
2020
09-11
Contact Us
No. 88 Wujiang East Road, Jinhua City, Zhejiang Province, China
Tel: +86-579-82326868
Fax : +86-579-82324666
©2023 Zhejiang Jianfeng Group Co., Ltd. Powered by: www.300.cn SEO Business License
SAF Coolest v1.2 设置面板 SHJSS-AHDB-FSSQE-ZSW
无数据提示
Sorry, the current column has no content !
You can view other columns or return to Home Page