Practice Experience of Manufacturing Department
Release time:
2023-03-21
As a staff member of Huang Ping Peak Marketing Department, I learned the production process and product shipment in the manufacturing department last August, which was divided into three stages.
Phase I: The Environmental Security Department organized us to carry out cross-departmental transfer safety learning, and the Manufacturing Department conducted production safety education and learning. Safety education was carried out on the illegal phenomena and safety accidents that often occur at the operation site, which made me understand the prevention knowledge of safety accidents, cases such as occupational injury factors and on-site safety operation requirements. I should dress strictly according to the production requirements.
Phase II: Be familiar with the performance and process of each equipment and understand the role of relevant raw materials in production during equipment maintenance. During the kiln ignition production, I followed the shift to understand the actual production, which links and deviations have an impact on the quality of clinker and cement and the corresponding emergency treatment measures. For example, in the process of cement clinker production, limestone, sandstone, leaf rock, clay, iron and other raw materials are required according to the batching requirements. After being measured by belt weighing, preliminary detection and feedback are carried out through cross-belt online analyzer to the measuring scale for dynamic fine adjustment, they enter the raw material roller for grinding according to the control standard, providing the basis for kiln calcination. After metering, the raw coal enters the coal vertical mill for grinding, and the quality control requirements of the mill are adjusted in time according to the characteristics of the coal and the calcination of the kiln, so as to facilitate the calcination of the kiln. In addition, the raw meal homogenized in the raw meal homogenization warehouse is metered and transported to the preheater for step-by-step preheating, decomposition and collection into the kiln. The decomposed material undergoes calcination in the rotary kiln to form qualified clinker and then enters the grate cooler for cooling. The key to cooling is to ensure that the quality of the clinker does not change, and once again the waste heat recovery and utilization. The cooled clinker is stored in the clinker warehouse to prepare for cement grinding. This is the clinker production process in the two grinding a burning. And cement grinding is cement manufacturing cement grinding is the final process of cement manufacturing, but also the most power consumption process. The production process for the cement clinker, desulfurization gypsum, grinding aids, fly ash, coal gangue and other materials according to the requirements of the measurement with grinding products to meet the market demand, the main control indicators are fineness, specific surface area, setting time, strength and so on.
Phase III: Cement delivery is also divided into three points. The first is to understand the significance of cement multi-point alternate feeding, the second is to be familiar with the cement delivery process, cement coding and spray code control, and finally to understand the work flow and function of production equipment.
After the 24-day production practice, I have a deeper understanding of the basic knowledge of cement production. Through the practical study of the technological process and mechanical equipment of the new dry cement production, I am more familiar with the characteristics and quality advantages of the products. This internship is to improve my comprehensive ability, strengthen my understanding of quality, improve the ability to work, but also understand the production will be applied to the new process, new technology, new equipment. At the same time to improve and strengthen the sense of teamwork, collaboration is the basis for the successful completion of the work. (Le Chao Chao)
More information
The company's "three" cultivation through the stage of acceptance
Since November 2015 was included in the second batch of "three" cultivation pilot enterprises in Zhejiang Province, the company has carried out a series of related work in depth. On October 19, the implementation of the company's "three" cultivation project from January 2016 to September 2017 passed the phased acceptance organized by Jinhua Economic and Information Commission and Jinhua Finance Bureau. According to the requirements of the "three" cultivation pilot enterprise responsibility letter signed with Zhejiang Province, Jinhua City and Wucheng District, as of the end of September 2017, the company has invested 16.0772 million yuan in related projects, and has achieved remarkable results in improving management, improving automation and informatization level. For example, after the digital system of quality and cost control in the plant extraction workshop of Jianfeng Health Technology Company is put into use, the whole production process can be controlled and traceable, the product quality is more stable, the production safety is effectively guaranteed, the "three wastes" emission is greatly reduced, and the product cost is reduced by 20%. The electronic label system of the pharmaceutical company automatically addresses and accurately locates the drugs in and out of the warehouse, which reduces the error rate of the out and into the warehouse, and the location management can automatically display the information such as the location and quantity of the drugs, which improves the work efficiency of the warehouse logistics and effectively reduces the management cost. The pharmaceutical company's sales management information system integrates sales management, warehouse management, customer management, statistical analysis and other modules, realizes drug sales management and control functions according to the requirements of GMP and GSP specifications, and analyzes drug regions and sales volume through big data, which will judge drug consumption trends faster and more accurately and improve the accuracy of the company's drug sales decisions. Health
2020
07-31
The company's "three" cultivation through the stage of acceptance
Since November 2015 was included in the second batch of "three" cultivation pilot enterprises in Zhejiang Province, the company has carried out a series of related work in depth. On October 19, the implementation of the company's "three" cultivation project from January 2016 to September 2017 passed the phased acceptance organized by Jinhua Economic and Information Commission and Jinhua Finance Bureau. According to the requirements of the "three" cultivation pilot enterprise responsibility letter signed with Zhejiang Province, Jinhua City and Wucheng District, as of the end of September 2017, the company has invested 16.0772 million yuan in related projects, and has achieved remarkable results in improving management, improving automation and informatization level. For example, after the digital system of quality and cost control in the plant extraction workshop of Jianfeng Health Technology Company is put into use, the whole production process can be controlled and traceable, the product quality is more stable, the production safety is effectively guaranteed, the "three wastes" emission is greatly reduced, and the product cost is reduced by 20%. The electronic label system of the pharmaceutical company automatically addresses and accurately locates the drugs in and out of the warehouse, which reduces the error rate of the out and into the warehouse, and the location management can automatically display the information such as the location and quantity of the drugs, which improves the work efficiency of the warehouse logistics and effectively reduces the management cost. The pharmaceutical company's sales management information system integrates sales management, warehouse management, customer management, statistical analysis and other modules, realizes drug sales management and control functions according to the requirements of GMP and GSP specifications, and analyzes drug regions and sales volume through big data, which will judge drug consumption trends faster and more accurately and improve the accuracy of the company's drug sales decisions. Health
2020
07-30
Yunnan Jianfeng supplies cement directly to Wa State of Myanmar
Yunnan Jianfeng Cement Company not only consolidates the original domestic market, but also gives full play to the location advantages of the three counties (Lancang, Menglian and Ximeng) close to the border to continuously expand the foreign market. Recently, the marketing department took the initiative to step out of the country from the Mangxin port in Menglian County and successfully sold "Jianfeng" brand cement to the newly planned Jinhua Xiaozunhe Island Development Zone in the Wa State of Myanmar. With the rapid development of China's economy in recent years, Myanmar has also increased the development of the China-Myanmar border area year by year. In order to attract more Chinese tourists to spend in transit, the Wa State Government of Myanmar has planned the Jinhua Xiaozunhe Island Development Zone near China's Menglian Mangxin Port. After the development zone is completed, it will mainly focus on gambling, business hotels, and border trade. There is an estimated demand for about 80000 tons of cement. When Yunnan Jianfeng marketing personnel learned of the news, they went deep into the development zone many times to understand the situation and had extensive contact with customers. With the good reputation of Jianfeng Cement in southwest Yunnan in recent years, they successfully signed a supply contract with a commercial mixing station in the development zone. At present, Yunnan Jianfeng has directly supplied 1200 tons of cement through Mangxin Port, and is expected to win 80% of the cement supply business of the development project. The initiative of "Belt and Road Initiative" to open up the international channels of South Asia and Southeast Asia has brought new development opportunities to many enterprises. This time, Yunnan Jianfeng Marketing Department went abroad to seize the opportunity, breaking the previous practice that the company mainly relied on agents for cement export, and achieved a new breakthrough in directly connecting users, which not only increased revenue, but also further expanded the radiation scope of its own marketing network, so as to further expand the scope of going abroad in the future.
2020
07-31
The company's "three" cultivation through the stage of acceptance
Since November 2015 was included in the second batch of "three" cultivation pilot enterprises in Zhejiang Province, the company has carried out a series of related work in depth. On October 19, the implementation of the company's "three" cultivation project from January 2016 to September 2017 passed the phased acceptance organized by Jinhua Economic and Information Commission and Jinhua Finance Bureau. According to the requirements of the "three" cultivation pilot enterprise responsibility letter signed with Zhejiang Province, Jinhua City and Wucheng District, as of the end of September 2017, the company has invested 16.0772 million yuan in related projects, and has achieved remarkable results in improving management, improving automation and informatization level. For example, after the digital system of quality and cost control in the plant extraction workshop of Jianfeng Health Technology Company is put into use, the whole production process can be controlled and traceable, the product quality is more stable, the production safety is effectively guaranteed, the "three wastes" emission is greatly reduced, and the product cost is reduced by 20%. The electronic label system of the pharmaceutical company automatically addresses and accurately locates the drugs in and out of the warehouse, which reduces the error rate of the out and into the warehouse, and the location management can automatically display the information such as the location and quantity of the drugs, which improves the work efficiency of the warehouse logistics and effectively reduces the management cost. The pharmaceutical company's sales management information system integrates sales management, warehouse management, customer management, statistical analysis and other modules, realizes drug sales management and control functions according to the requirements of GMP and GSP specifications, and analyzes drug regions and sales volume through big data, which will judge drug consumption trends faster and more accurately and improve the accuracy of the company's drug sales decisions. Health
2020
07-31
"We were also praised by the traffic police." On September 26, when talking about the civilized travel volunteer activities a few days ago, Li Xuegen of the big pharmacy smiled and was very happy that his work was recognized. Starting from May this year, during the rush hour on the 5th and 20th of each month (weekends and holidays are postponed), there will be a group of volunteers wearing red vests and hats, holding signs with the words "courtesy of zebra crossing, civilized crossing of the road" to divert traffic at many intersections in the city. This is a civilized travel volunteer service activity carried out by Jinhua City to further promote civilized travel and persuade uncivilized behavior. As a civilized unit at the municipal level in Jinhua, Jianfeng Group's duty junction is at the intersection of Bayi North Street and Zhongshan West Road. Before the activity was carried out, as the organizer of the group company, the group office had deep concerns. The activity took a long time and required a lot of manpower. As an enterprise, under the condition of ensuring normal production, it was completed by employees in their spare time. Can it be continued? To this end, Xiang Chongping, the leader in charge of the group company, specially organized a meeting of the directors of the subordinate enterprise offices to mobilize and deploy the matter. The group office also specially established the QQ group of "Peak Civilized Travel Volunteer Service" to release the contents and arrangements of the activities, update the duty situation, and praise the small partners on duty. At the beginning of the activity, colleagues in the headquarters building took the lead in taking up their posts. The first class was Li Hong, Li Xia, Yang Liu and Lei Yuan of the finance department of the group company. Employees of the group office, the peak health experience hall, Qiubin Factory and the international trading company also took up their posts one after another. Other enterprises also took part in an orderly manner according to the duty schedule.
2020
07-31
Daye peak again won the national inspection big contrast "all-excellent award"
A few days ago, daye peak cement co., ltd won the "all-excellent award" in the 16th national cement quality index inspection comparison of "hongchao science and technology cup" organized by the national cement quality supervision and inspection center in 2017 ". The national cement quality index inspection is held every two years. It is the highest level competition in the cement industry. It aims to understand the current quality inspection level of China's cement industry through large-scale comparison, promote various cement inspection departments to improve the inspection quality, and provide accurate data for cement production and use. The results truly reflect the overall inspection level of national cement production enterprises and provincial building materials (cement) inspection stations, it represents the highest level of inspection technology in the cement industry. Over the years, Daye Peak has firmly established the concept of "quality is the life of an enterprise", always puts product quality control in the first place, and conducts daily inspections in strict accordance with the testing items and frequency specified by national standards. actively carry out inspection comparison with provincial and municipal cement quality inspection centers, improve the professional level of inspectors through skill training, and spot check the internal passwords of inspectors every month to strictly ensure the accuracy and reliability of data, to ensure that the quality of the factory cement to meet the market and customer demand, and further enhance the core competitiveness of enterprises. Since it was officially put into production in 2008, Daye Peak has participated in the national cement quality index inspection five times, and has achieved good results. Among them, it won the "All-Excellent Award" in 2009 and the "All-Qualified" in 2011, 2013 and 2015. Unit Award ". (Yang Huiping)
2020
07-31