Practice Experience of Manufacturing Department
Release time:
2023-03-21
As a staff member of Huang Ping Peak Marketing Department, I learned the production process and product shipment in the manufacturing department last August, which was divided into three stages.
Phase I: The Environmental Security Department organized us to carry out cross-departmental transfer safety learning, and the Manufacturing Department conducted production safety education and learning. Safety education was carried out on the illegal phenomena and safety accidents that often occur at the operation site, which made me understand the prevention knowledge of safety accidents, cases such as occupational injury factors and on-site safety operation requirements. I should dress strictly according to the production requirements.
Phase II: Be familiar with the performance and process of each equipment and understand the role of relevant raw materials in production during equipment maintenance. During the kiln ignition production, I followed the shift to understand the actual production, which links and deviations have an impact on the quality of clinker and cement and the corresponding emergency treatment measures. For example, in the process of cement clinker production, limestone, sandstone, leaf rock, clay, iron and other raw materials are required according to the batching requirements. After being measured by belt weighing, preliminary detection and feedback are carried out through cross-belt online analyzer to the measuring scale for dynamic fine adjustment, they enter the raw material roller for grinding according to the control standard, providing the basis for kiln calcination. After metering, the raw coal enters the coal vertical mill for grinding, and the quality control requirements of the mill are adjusted in time according to the characteristics of the coal and the calcination of the kiln, so as to facilitate the calcination of the kiln. In addition, the raw meal homogenized in the raw meal homogenization warehouse is metered and transported to the preheater for step-by-step preheating, decomposition and collection into the kiln. The decomposed material undergoes calcination in the rotary kiln to form qualified clinker and then enters the grate cooler for cooling. The key to cooling is to ensure that the quality of the clinker does not change, and once again the waste heat recovery and utilization. The cooled clinker is stored in the clinker warehouse to prepare for cement grinding. This is the clinker production process in the two grinding a burning. And cement grinding is cement manufacturing cement grinding is the final process of cement manufacturing, but also the most power consumption process. The production process for the cement clinker, desulfurization gypsum, grinding aids, fly ash, coal gangue and other materials according to the requirements of the measurement with grinding products to meet the market demand, the main control indicators are fineness, specific surface area, setting time, strength and so on.
Phase III: Cement delivery is also divided into three points. The first is to understand the significance of cement multi-point alternate feeding, the second is to be familiar with the cement delivery process, cement coding and spray code control, and finally to understand the work flow and function of production equipment.
After the 24-day production practice, I have a deeper understanding of the basic knowledge of cement production. Through the practical study of the technological process and mechanical equipment of the new dry cement production, I am more familiar with the characteristics and quality advantages of the products. This internship is to improve my comprehensive ability, strengthen my understanding of quality, improve the ability to work, but also understand the production will be applied to the new process, new technology, new equipment. At the same time to improve and strengthen the sense of teamwork, collaboration is the basis for the successful completion of the work. (Le Chao Chao)
More information
On January 4, the Jinhua Federation of Industry and Commerce held the sixth member congress. Jiang Xiaomeng, chairman of the group company, was elected as the chairman of the Jinhua Federation of Industry and Commerce at the meeting, and served as 20 "2016 Xinyi Good Wu Merchants" One of the commendations from relevant departments. Jinhua city leaders Zhao Guangjun, and military and civilian, Huang Jinchao, Chen Xiao, Shao Guoqiang, Xu Zhangcai attended the opening ceremony of the conference. Zhao Guangjun, Secretary of the municipal Party committee, congratulated the convening of the conference on behalf of the four groups of the city. He hoped that the Federation of industry and Commerce at all levels and the majority of non-public economic personages would unify their thoughts and actions to the deployment requirements of the plenary session of the municipal Party committee, further strengthen their confidence, grasp the general trend, forge ahead, always maintain the correct political direction, firmly promote the development of non-public economy, and make greater contributions to the rise of Zhejiang. At this meeting, Jiang Xiaomeng, chairman of the group company, was elected as the new chairman of the Jinhua City Federation of Industry and Commerce. Jiang Xiaomeng said in his speech that the Federation of Industry and Commerce is a bridge and link between the party and the government to connect with people in the non-public economy, an assistant to the government in managing and serving the non-public economy, and an important window for the interests of the broad non-public economy. it represents the fundamental interests of the broad non-public economy. In the next five years, the new Federation of Industry and Commerce will continue to enhance cohesion and influence based on service; give full play to the role of "guidance" and "bridge", and always maintain sensitivity to the new situation with advanced awareness and long-term vision, and pay close attention to domestic and foreign Industrial development trends and economic development trends, timely discover new situations, study new problems, and act as a bridge between the government and enterprises
2020
07-31
Compilation of Three-year Operation Plan Completed
After many discussions and revisions, the three-year business plan compiled by the group's subordinate enterprises was finalized in early December and compiled into a book. In order to continuously improve the company's core competitiveness and sustainable development capabilities, the group company completed the company's five-year development plan in 2013 after many discussions, and clarified the development concept of "cooperative innovation to strengthen the main business, standardize science and seek development", Put forward the role of cement as a base player and be a cost leader in the regional market; medicine is guided by scientific and technological innovation and a market leader in segmented fields. And on this basis, the specific strategic objectives and development direction are formulated. In the second half of this year, on the basis of the pilot medium-and long-term economic responsibility system of the International Trade Company and Jinhua Pharmaceutical Company, the company requires each industrial sector to prepare its own three-year business plan. This is not only one of the actions to implement the strategic plan of the group company, but also an extension of the development strategy of the group company. After full discussion and revision, the current three-year business plan has been compiled into a book, which will become the work guide for the company's professional companies and directly affiliated enterprises in the future. The preparation of medium and long-term development plans, so that the company's managers at all levels more clear about the future direction of development, to be able to develop work objectives and work plans with a long-term vision, to avoid short-sighted behavior in management, the work of the enterprise to do fine, solid, detailed, and at the same time more fully and effectively mobilize the enthusiasm of personnel at all levels. The company requires subordinate enterprises to do a good job in the publicity and implementation of the "three-year business plan" of the enterprise, and in the annual work objectives
2020
07-31
Compilation of Three-year Operation Plan Completed
After many discussions and revisions, the three-year business plan compiled by the group's subordinate enterprises was finalized in early December and compiled into a book. In order to continuously improve the company's core competitiveness and sustainable development capabilities, the group company completed the company's five-year development plan in 2013 after many discussions, and clarified the development concept of "cooperative innovation to strengthen the main business, standardize science and seek development", Put forward the role of cement as a base player and be a cost leader in the regional market; medicine is guided by scientific and technological innovation and a market leader in segmented fields. And on this basis, the specific strategic objectives and development direction are formulated. In the second half of this year, on the basis of the pilot medium-and long-term economic responsibility system of the International Trade Company and Jinhua Pharmaceutical Company, the company requires each industrial sector to prepare its own three-year business plan. This is not only one of the actions to implement the strategic plan of the group company, but also an extension of the development strategy of the group company. After full discussion and revision, the current three-year business plan has been compiled into a book, which will become the work guide for the company's professional companies and directly affiliated enterprises in the future. The preparation of medium and long-term development plans, so that the company's managers at all levels more clear about the future direction of development, to be able to develop work objectives and work plans with a long-term vision, to avoid short-sighted behavior in management, the work of the enterprise to do fine, solid, detailed, and at the same time more fully and effectively mobilize the enthusiasm of personnel at all levels. The company requires subordinate enterprises to do a good job in the publicity and implementation of the "three-year business plan" of the enterprise, and in the annual work objectives
2020
07-31
Since the beginning of the 2016 qualification evaluation work of the group company in late November, it has been carried out in an orderly manner according to the established procedures. Compared with previous years, this year, according to the actual situation of the company, new cement plate job settings and development channels and other content. According to the provisions of the Company's Measures for the Administration of Staff Qualifications, the scope of application of the qualification assessment is for all employees of the Group's non-administrative position series, which is divided into three categories: management, technology and technical operation. Among them, the management and technical categories are divided into five grades, each with 2-4 grades; the mechanic operation category is divided into four grades, each with 2-4 grades. The Group Company establishes a qualification evaluation committee, which is responsible for guiding the evaluation of the qualifications of the Group Company, and conducting the evaluation of the qualifications of each department (office) of the Group Company and the qualifications of four levels and above within the scope of the Group Company; professional companies and directly affiliated enterprises establish an evaluation organization, which is responsible for the evaluation of the qualifications of the enterprise and subordinate enterprises at level 3 and below; the Human Resources Department of CNPC is responsible for organizing the review work and carrying out the transactional work of qualification management. Compared with previous years, the company has made a supplementary revision to the "Measures for the Administration of Employee Qualifications" this year, adding a "cement sector position setting and development channel", aiming at the actual situation and professional characteristics of the current two cement companies implementing job optimization, positions such as safety and environmental protection management, sales management, procurement, warehouse management, quality management, equipment maintenance (management), electrical maintenance (management), process operation, inspection workers, etc. are set up respectively, and different levels are divided, and corresponding evaluation standards are set. In accordance with the Management Measures, the post
2020
07-31
Compilation of Three-year Operation Plan Completed
After many discussions and revisions, the three-year business plan compiled by the group's subordinate enterprises was finalized in early December and compiled into a book. In order to continuously improve the company's core competitiveness and sustainable development capabilities, the group company completed the company's five-year development plan in 2013 after many discussions, and clarified the development concept of "cooperative innovation to strengthen the main business, standardize science and seek development", Put forward the role of cement as a base player and be a cost leader in the regional market; medicine is guided by scientific and technological innovation and a market leader in segmented fields. And on this basis, the specific strategic objectives and development direction are formulated. In the second half of this year, on the basis of the pilot medium-and long-term economic responsibility system of the International Trade Company and Jinhua Pharmaceutical Company, the company requires each industrial sector to prepare its own three-year business plan. This is not only one of the actions to implement the strategic plan of the group company, but also an extension of the development strategy of the group company. After full discussion and revision, the current three-year business plan has been compiled into a book, which will become the work guide for the company's professional companies and directly affiliated enterprises in the future. The preparation of medium and long-term development plans, so that the company's managers at all levels more clear about the future direction of development, to be able to develop work objectives and work plans with a long-term vision, to avoid short-sighted behavior in management, the work of the enterprise to do fine, solid, detailed, and at the same time more fully and effectively mobilize the enthusiasm of personnel at all levels. The company requires subordinate enterprises to do a good job in the publicity and implementation of the "three-year business plan" of the enterprise, and in the annual work objectives
2020
07-30
"Peak" was identified as China's well-known trademark
Recently, the Trademark Office of the State Administration for Industry and Commerce issued a document that the "Jianfeng" trademark held by Jianfeng Pharmaceutical Company was recognized as a well-known trademark. The main contents of the "Reply of the Trademark Office of the State Administration for Industry and Commerce on the Identification of" Jianfeng "Trademark as a Well-known Trademark" (Shang Standard Chi Zi [2016] No. 121) are as follows: according to the relevant provisions of the Trademark Law, the regulations for the implementation of the Trademark Law and the provisions on the identification and protection of well-known trademarks, after examination and research, it is recognized that the registered trademark of "Jianfeng" used by Zhejiang Jianfeng Pharmaceutical Co., Ltd. in category 5 of the International Classification of Goods and Services for Trademark Registration is a well-known trademark. The identification of the well-known trademark has effectively enhanced the brand value of the company, helped to improve the popularity of the company's products, and further strengthened the protection of the "peak" trademark. (Zhou Hengbin) News link: "well-known trademark" (Well-knownTradeMark), also known as well-known trademark, first appeared in the Paris Convention for the Protection of Industrial property signed in 1883. According to international and domestic intellectual property laws and regulations, the well-known trademark system is created to fully protect the legitimate rights and interests of well-known trademark owners. Its purpose is to reasonably protect the relevant trademark ownership, maintain fair competition, and stop infringement of others' trademark exclusive rights. behavior. China joined the Convention in 1984, according to the provisions of the Convention to give special legal protection to well-known trademarks, has become an important part of China's trademark legal work. Well-known trademarks in China (ChinaFam
2020
07-31