Ye Xuying: Accumulate Experience and Innovate
Release time:
2023-03-21
In Jianfeng Health Technology Company, when it comes to people who know the production equipment best, most people think of Ye Xuying first.
Ye Xuying entered Peak Health in 2015 and has been the manager of the production department. He is mainly responsible for the production management of three workshops: health care products, Chinese herbal pieces and plant extraction. He said that he has been engaged in drug and extract related work since graduation, and has been in the production line for more than 20 years. No matter what type of production line, most of the equipment principles are similar, and he is very interested in mechanical equipment. As long as you look at the circuit diagram and know the principle of the equipment, you will basically understand the operating performance of the equipment. Therefore, in the production process, if there is a problem with the equipment, the operator will first find him to solve it. However, he has always advocated that workshop employees can carry out simple tasks such as equipment maintenance by themselves, because they can improve efficiency. Especially in the clean area, it takes a long time for the mechanic to clean and disinfect. If the employee can solve the small problem by himself, the downtime of the equipment can be greatly saved. When
Ye Xu Ying first entered the company, he found that the employees in the workshop were not familiar with the performance of the equipment. There were still some differences between the laboratory process and the production on the production line. Moreover, each employee's understanding and acceptance ability was different. Someone needed to convert the experimental process into the workshop production process and formulate the operation procedures to ensure the smooth production, reduce errors and ensure the product quality. So Ye Xuying, who had just entered the company, became the "bridge" and first improved the product technology in the workshop. In recent years, he has also trained five master operators who can master job operation skills.
The understanding of the equipment process also laid a solid foundation for Ye Xuying's technological innovation and technological transformation. peak health of the main products of rhodiola rosea broken ganoderma lucidum spore powder soft capsule (jingzhi cikang) main raw materials by rhodiola rosea, ganoderma lucidum spore powder, ginseng and other 6 kinds of chinese herbal medicine composition. In the process of pressing the soft capsule, the contents are bonded together after repeated friction and heat generation in the injection pump, resulting in the particle size of the material becoming larger to the level that does not meet the conditions to be met for pressing the soft capsule. When the rubber is pressed, it is easy to leak oil from gaps, thus the soft capsule cannot be pressed continuously, and even the whole batch of soft capsules is scrapped. This problem once restricted the production of Jingzhi Cikang. However, the contents of most soft capsules on the market are relatively single. As long as the fineness of the contents is ensured, the qualified rate of soft capsules will be very high. Because there is no ready-made reference experience, Ye Xuying began his exploration. He optimized the pressing parameters and content preparation process according to the properties of solid materials. He used the existing wall-breaking equipment in the workshop and adopted the wall-breaking crushing treatment method to successfully eliminate the risk of oil leakage of soft capsules, greatly improving the yield of finished products, and theoretically making the products easier to be absorbed by human body.
When it comes to these innovations and renovations, Ye Xuying is like a treasure. Before, a company that made dried blueberries found Spike Health to help decolorize the sugar water soaked in blueberries. During the chat, they said that they wanted to press tablets with blueberry extract to make tableted candy. However, due to the strict requirements on the content of proanthocyanidins, they could not add too many auxiliary materials, and several companies could not solve the technical problem of tableting. In the process of tablet compression, auxiliary materials need to be added for bonding. General adhesives are solid. The content of proanthocyanidins will be reduced if more is added, but the compression is not good if less is added. After learning about this situation, Ye Xuying's brain turned again, since the solid is not good, what about the liquid? The nature of blueberry extract is quite special, and it can dissolve with many kinds of organic solvents, so he started a round of attempts by using this characteristic. At present, it has successfully provided 3 pilot samples to the other party, and has reached the quality requirements of tablets in terms of appearance color, product content, hardness, etc. The preparation method also applied for an invention patent.
Ye Xuying said that his innovations and inventions are all derived from years of work experience and familiarity with equipment and technology. In recent years, he has applied for 6 patents, participated in a number of government projects, developed a number of new products, and was also rated as the 2022 "Outstanding Enterprise Science and Technology Talent" in Wucheng District ". In his heart, there is a good wish, that is, Peak Health can achieve breakthroughs with the joint efforts of everyone, use modern technology to accelerate the progress of digitization, build a digital chemical factory, and strengthen and grow the health industry. And he is working with his colleagues to contribute to this goal. (Ni Yingzhen Chen Shengmu)
More information
Editor's note: During the National Day, the "Jinhua New Observation" column of Jinhua TV Station launched a series of reports on "National Day New Observation: New Development of Old Enterprises" to understand the new developments of those old enterprises that have grown up with New China in the new era. October 3 broadcast of the "peak of the 'centennial 'ideal", about the development of the peak group and the future direction of development. The "century" ideal of the peak Jinhua TV reporter Wang Dujuan Jiang Qian host: speaking of Zhejiang Jianfeng Group Co., Ltd., Jinhua people are no stranger. The older generation of Jinhua people are more familiar with, may be the predecessor of Jianfeng Group-Jinhua Cement Factory. Open the first old photo 58 years ago, surrounded by mountains and a rice field in the middle. Old Jinhua can see at a glance that this is the Wise Temple, 8 kilometers north of Jinhua City and east of the former Zhuangtou of Luodian Town. In August 1958, the first group of pioneers came here and built Jinhua's first cement factory on a desolate hillside of 16.94 mu with a pair of hands and warm blood. From the earliest cattle-drawn ball forming machine to the electric ball forming machine, from pure manual labor to machine substitution, it took 26 years of hard work. By 1983, the annual output of peak cement reached 120000 tons, the output value was 6.75 million yuan, and the profit was 2.4 million yuan. In these 26 years, the cement plant has experienced a difficult period of the country, and the ten-year catastrophe of the "Cultural Revolution" has finally ushered in a good time of reform and opening up with tenacious vitality, laying the foundation for steady development in the future. Looking at these old pictures,
2020
07-31
Peak Cement Successfully Enters Lancang Airport Project
News from our newspaper On September 26, the first batch of airport runway cement produced by Yunnan Jianfeng Cement Company was successfully delivered to the Lancang Airport site, which marked another important step in the expansion of Jianfeng Cement in the southwest Yunnan market. Lancang Airport is located in Donghi Town, Lancang Lahu Autonomous County, Pu'er City. It is the center of the "three counties" and "Pu'er Green Triangle" tourist areas of Lancang, Menglian and Ximeng, with a wide range of radiation and obvious location advantages. The project is a national "Twelfth Five-Year Plan" construction project and a key construction project in Yunnan Province. It was approved by the State Council and the Central Military Commission in January 2013. It started construction at the end of November 2014 and is expected to be completed in April 2017. The current project of Lancang Airport is designed to meet the target of 250000 passenger throughput and 750 tons of cargo throughput by 2020, including the construction of a 2600-meter-long and 45-meter-wide runway, the construction of a new 3000-square-meter terminal building and 4 apron parking spaces, including communication, navigation, lighting, meteorology and other supporting projects. The total investment of the project is 1.533 billion yuan. Upon completion, it can be used for Boeing 737 series, Airbus A319 and A320 series, MA-60 and other passenger aircraft take off and land. Since the start of the Lancang Airport project, Yunnan Peak has listed it as an important goal to strive. Compared with ordinary cement, special cement for airport runways has the characteristics of small shrinkage, strong wear resistance, good frost resistance and low alkali content in addition to the requirements of ordinary 42.5 Portland cement. To this end, Yunnan peak in the project to strive for at the same time, the collection of technical forces to tackle the problem, in the clinker composition to determine, cooked.
2020
07-31
Jianfeng won the Zhejiang Industrial Award
A few days ago, we learned from the relevant departments of Zhejiang Province that the company won the 2016 "Zhejiang Industrial Award Silver Award". Zhejiang Industrial Award was established in 2014 and is selected every two years. The purpose of carrying out the selection and commendation of the Zhejiang Industrial Awards is to thoroughly implement the "August 8 Strategy", comprehensively implement the innovation-driven development strategy, speed up the industrial transformation and upgrading with the "four for three" as the starting point, and commend the adherence to the scientific concept of development. adhere to industry, conscientiously fulfill social responsibilities, establish a modern enterprise system, and take a new road of industrialization with characteristics. The evaluation work is jointly organized and implemented by Zhejiang Industrial Economic Federation, Enterprise Federation, Entrepreneur Association, relevant provincial industry associations, municipal industrial economic federations, enterprise federations, entrepreneur associations, and relevant units. The award review committee is composed of relevant government departments, provincial "three committees", relevant provincial industry associations, and experts in industrial economy, management, finance, taxation, quality, environmental protection, safety, technology, and law, the participating enterprises are comprehensively evaluated from the aspects of industry demonstration role, scientific and technological innovation, economic benefits, resource utilization, environmental protection, brand strategy, product quality, production safety, social responsibility, enterprise management, human resources and so on. "The enterprises that have won the Zhejiang Industrial Award this time are all outstanding enterprises that have made significant contributions to the promotion of Zhejiang's economic development; they are all leading enterprises, backbone enterprises, and high-growth enterprises from different industries, representing the scale of Zhejiang's industrial development. The direction and leading spirit represent the highest level of Zhejiang's industrial development." According to the organizers related negative
2020
07-31
Peak Cement Successfully Enters Lancang Airport Project
News from our newspaper On September 26, the first batch of airport runway cement produced by Yunnan Jianfeng Cement Company was successfully delivered to the Lancang Airport site, which marked another important step in the expansion of Jianfeng Cement in the southwest Yunnan market. Lancang Airport is located in Donghi Town, Lancang Lahu Autonomous County, Pu'er City. It is the center of the "three counties" and "Pu'er Green Triangle" tourist areas of Lancang, Menglian and Ximeng, with a wide range of radiation and obvious location advantages. The project is a national "Twelfth Five-Year Plan" construction project and a key construction project in Yunnan Province. It was approved by the State Council and the Central Military Commission in January 2013. It started construction at the end of November 2014 and is expected to be completed in April 2017. The current project of Lancang Airport is designed to meet the target of 250000 passenger throughput and 750 tons of cargo throughput by 2020, including the construction of a 2600-meter-long and 45-meter-wide runway, the construction of a new 3000-square-meter terminal building and 4 apron parking spaces, including communication, navigation, lighting, meteorology and other supporting projects. The total investment of the project is 1.533 billion yuan. Upon completion, it can be used for Boeing 737 series, Airbus A319 and A320 series, MA-60 and other passenger aircraft take off and land. Since the start of the Lancang Airport project, Yunnan Peak has listed it as an important goal to strive. Compared with ordinary cement, special cement for airport runways has the characteristics of small shrinkage, strong wear resistance, good frost resistance and low alkali content in addition to the requirements of ordinary 42.5 Portland cement. To this end, Yunnan peak in the project to strive for at the same time, the collection of technical forces to tackle the problem, in the clinker composition to determine, cooked.
2020
07-31
Peak Cement Successfully Enters Lancang Airport Project
News from our newspaper On September 26, the first batch of airport runway cement produced by Yunnan Jianfeng Cement Company was successfully delivered to the Lancang Airport site, which marked another important step in the expansion of Jianfeng Cement in the southwest Yunnan market. Lancang Airport is located in Donghi Town, Lancang Lahu Autonomous County, Pu'er City. It is the center of the "three counties" and "Pu'er Green Triangle" tourist areas of Lancang, Menglian and Ximeng, with a wide range of radiation and obvious location advantages. The project is a national "Twelfth Five-Year Plan" construction project and a key construction project in Yunnan Province. It was approved by the State Council and the Central Military Commission in January 2013. It started construction at the end of November 2014 and is expected to be completed in April 2017. The current project of Lancang Airport is designed to meet the target of 250000 passenger throughput and 750 tons of cargo throughput by 2020, including the construction of a 2600-meter-long and 45-meter-wide runway, the construction of a new 3000-square-meter terminal building and 4 apron parking spaces, including communication, navigation, lighting, meteorology and other supporting projects. The total investment of the project is 1.533 billion yuan. Upon completion, it can be used for Boeing 737 series, Airbus A319 and A320 series, MA-60 and other passenger aircraft take off and land. Since the start of the Lancang Airport project, Yunnan Peak has listed it as an important goal to strive. Compared with ordinary cement, special cement for airport runways has the characteristics of small shrinkage, strong wear resistance, good frost resistance and low alkali content in addition to the requirements of ordinary 42.5 Portland cement. To this end, Yunnan peak in the project to strive for at the same time, the collection of technical forces to tackle the problem, in the clinker composition to determine, cooked.
2020
07-30
Peak two enterprises were commended
On September 23, the launching ceremony of the 2016 Jinhua Zhejiang Shopping Festival and the 2015 Jinhua Honest Enterprise Commendation Conference were held in the urban people's square. Jianfeng Group's Jinhua Jianfeng Pharmacy Chain Co., Ltd. and Zhejiang Jianfeng International Trade Co., Ltd. were commended.
2020
07-31