Yunnan Peak Replacing Kiln Tail Chimney
Release time:
2023-03-04
News from our newspaper # February 8 , with the completion of the welding of the last section of pipeline, the replacement of the kiln tail chimney of Yunnan Jianfeng Cement Company was successfully completed.
When Yunnan Peak inspected the steel plate of kiln tail chimney in November of 2022 , it was found that the thickness was reduced by 2-3 mm compared with that of 2021 , and it was necessary to replace it. In addition, according to the continuous 5 years of testing data analysis, it is found that the corrosion is weak below the inlet of the tail exhaust fan. In order to save costs, after discussion, it was decided that the replacement chimney should be replaced upward from , 25, 19 meters. For those below , 25, 21 meters, anti-corrosion treatment should be carried out during the next kiln shutdown to ensure that the service life matches the newly replaced part. After various understanding, in 2022
10, Yunnan Jianfeng determined the supplier and arrival time of the materials used for replacement through bidding, and worked out a set of construction plan through communication with the hoisting master and the construction team in the early stage: use 600 ton truck crane, and use the inner cylinder to hoist into the construction platform first when dismantling, after cutting 8 wire rope holes and fixing 4 wire ropes, the crane places the construction platform at 1 m below the required slit and fixes it firmly. The cutting can be lifted out. When installing a new chimney, the lowest construction platform is cut for splicing and welding, and so on. Since some iron plates are composite plates, 2.5 mm corrosion-resistant stainless steel plates are bonded to ordinary steel plates. In order to ensure that the stainless steel plates are not damaged, the old breathable cloth is used to be wound on the pressure roller of the plate bending machine for protection. Special lifting workpieces are used in the manufacturing process to ensure that the inner cylinder is not damaged. In order to ensure the welding quality, plates above 10 mm shall be beveled on one side. Each transverse seam and vertical seam shall be welded on both sides and each weld shall be inspected. Only after approval can the next section be hoisted and butted. According to the hoisting scheme, it is divided into 4 sections, and the hoisting weight and construction position corresponding to each section are calculated to control the length. 2 May 3 , the crane was assembled in the factory and dismantled in the afternoon of
4. Due to the difficulty of docking the old and new pipes, the deformation of the original pipe is large, and the docking time exceeds the expected time. For the sake of construction safety, Yunnan Jianfeng communicated with the construction unit and arranged a section of hanging every day to ensure the completion of welding before dark and the withdrawal of personnel. Finally, the replacement of all kiln tail chimneys was completed in the afternoon of . (Lou Xuxin)
More information
Publicity of Environmental Protection Acceptance for Completion of Kiln End Flue Gas Desulfurization Project of daye peak cement co., ltd. According to the requirements of the Interim Measures for Environmental Protection Acceptance for Completion of Construction Projects (No.4 [2017] of the State Environmental Regulations) issued by the Ministry of Environmental Protection, the environmental protection acceptance information of "Kiln End Flue Gas Desulfurization Project" of daye peak cement co., ltd. is now publicized. Basic Information of 1. Project Project Name: Kiln End Flue Gas Desulfurization Project Construction Unit: daye Jianfeng Cement Co., Ltd. Project Construction Location: Yongguang Village, Baoan Town, daye city, nature of the project in the existing plant area of daye Jianfeng Cement Co., Ltd.: The construction content of the technological transformation project is: This technological transformation project is mainly to build a wet desulfurization system for kiln end gas of the company's existing 4000t cement clinker production line, adopting limestone-gypsum wet flue gas desulfurization process. The project covers a total area of 500 m2, with a new construction area of about 450 m2. It mainly builds desulfurization complex building, flue gas system, SO2 absorption system, limestone powder conveying and limestone slurry preparation system, process water system, gypsum dehydration system and supporting pipelines. Power supply, water supply, compressed air and other public works rely on the existing plant. Total investment and environmental protection investment: the total investment of the project is 10.37 million yuan, all of which are environmental protection investment. The project was entrusted to Huangshi Yangtze River Environmental Engineering Design and Research Institute to carry out environmental impact assessment in September 2017. On November 16, 2017, Daye Municipal Environmental Protection Bureau issued a reply with YEHAN [2017] No. 354. Implementation of 2. environmental protection measures The scope of this acceptance is the flue gas desulfurization system and supporting facilities at the end of the kiln. (1) Exhaust gas pollution
2020
07-31
Spike New Drug Approved for Registration
On April 16, Jianfeng Pharmaceutical Company received the approval and issuance of Olopatadine Hydrochloride Eye Drops "Drug Registration Approval" (approval number: 2019S00296) approved by the State Drug Administration. Olopatadine hydrochloride eye drops is mainly used to treat the signs and symptoms of allergic conjunctivitis. It is a mast cell stabilizer and a relatively selective histamine H1-receptor antagonist. It can inhibit type I immediate allergic reactions in vivo and in vitro experiments. At present, the product has been included in the "National Basic Medical Insurance, Work Injury Insurance and Maternity Insurance Drug Catalog (2017 Edition)" and classified as Class B. According to the relevant data of IMS database, in 2018, the global sales of olopatadine hydrochloride eye drops were about 0.37 billion US dollars, and the sales in China were about 10.232 million US dollars. Spike Pharmaceuticals already has the corresponding production line, this time to obtain the registration approval, marking Spike Pharmaceuticals has the qualification to carry out the production and sales of olopatadine hydrochloride eye drops, will further enrich the product line of Spike Pharmaceuticals, help to enhance the competitiveness of the company's pharmaceutical business. (Xia Yingpin)
2020
07-31
Spike New Drug Approved for Registration
On April 16, Jianfeng Pharmaceutical Company received the approval and issuance of Olopatadine Hydrochloride Eye Drops "Drug Registration Approval" (approval number: 2019S00296) approved by the State Drug Administration. Olopatadine hydrochloride eye drops is mainly used to treat the signs and symptoms of allergic conjunctivitis. It is a mast cell stabilizer and a relatively selective histamine H1-receptor antagonist. It can inhibit type I immediate allergic reactions in vivo and in vitro experiments. At present, the product has been included in the "National Basic Medical Insurance, Work Injury Insurance and Maternity Insurance Drug Catalog (2017 Edition)" and classified as Class B. According to the relevant data of IMS database, in 2018, the global sales of olopatadine hydrochloride eye drops were about 0.37 billion US dollars, and the sales in China were about 10.232 million US dollars. Spike Pharmaceuticals already has the corresponding production line, this time to obtain the registration approval, marking Spike Pharmaceuticals has the qualification to carry out the production and sales of olopatadine hydrochloride eye drops, will further enrich the product line of Spike Pharmaceuticals, help to enhance the competitiveness of the company's pharmaceutical business. (Xia Yingpin)
2020
07-31