Yunnan Peak Replacing Kiln Tail Chimney
Release time:
2023-03-04
News from our newspaper # February 8 , with the completion of the welding of the last section of pipeline, the replacement of the kiln tail chimney of Yunnan Jianfeng Cement Company was successfully completed.
When Yunnan Peak inspected the steel plate of kiln tail chimney in November of 2022 , it was found that the thickness was reduced by 2-3 mm compared with that of 2021 , and it was necessary to replace it. In addition, according to the continuous 5 years of testing data analysis, it is found that the corrosion is weak below the inlet of the tail exhaust fan. In order to save costs, after discussion, it was decided that the replacement chimney should be replaced upward from , 25, 19 meters. For those below , 25, 21 meters, anti-corrosion treatment should be carried out during the next kiln shutdown to ensure that the service life matches the newly replaced part. After various understanding, in 2022
10, Yunnan Jianfeng determined the supplier and arrival time of the materials used for replacement through bidding, and worked out a set of construction plan through communication with the hoisting master and the construction team in the early stage: use 600 ton truck crane, and use the inner cylinder to hoist into the construction platform first when dismantling, after cutting 8 wire rope holes and fixing 4 wire ropes, the crane places the construction platform at 1 m below the required slit and fixes it firmly. The cutting can be lifted out. When installing a new chimney, the lowest construction platform is cut for splicing and welding, and so on. Since some iron plates are composite plates, 2.5 mm corrosion-resistant stainless steel plates are bonded to ordinary steel plates. In order to ensure that the stainless steel plates are not damaged, the old breathable cloth is used to be wound on the pressure roller of the plate bending machine for protection. Special lifting workpieces are used in the manufacturing process to ensure that the inner cylinder is not damaged. In order to ensure the welding quality, plates above 10 mm shall be beveled on one side. Each transverse seam and vertical seam shall be welded on both sides and each weld shall be inspected. Only after approval can the next section be hoisted and butted. According to the hoisting scheme, it is divided into 4 sections, and the hoisting weight and construction position corresponding to each section are calculated to control the length. 2 May 3 , the crane was assembled in the factory and dismantled in the afternoon of
4. Due to the difficulty of docking the old and new pipes, the deformation of the original pipe is large, and the docking time exceeds the expected time. For the sake of construction safety, Yunnan Jianfeng communicated with the construction unit and arranged a section of hanging every day to ensure the completion of welding before dark and the withdrawal of personnel. Finally, the replacement of all kiln tail chimneys was completed in the afternoon of . (Lou Xuxin)
More information
On January 4, the Jinhua Federation of Industry and Commerce held the sixth member congress. Jiang Xiaomeng, chairman of the group company, was elected as the chairman of the Jinhua Federation of Industry and Commerce at the meeting, and served as 20 "2016 Xinyi Good Wu Merchants" One of the commendations from relevant departments. Jinhua city leaders Zhao Guangjun, and military and civilian, Huang Jinchao, Chen Xiao, Shao Guoqiang, Xu Zhangcai attended the opening ceremony of the conference. Zhao Guangjun, Secretary of the municipal Party committee, congratulated the convening of the conference on behalf of the four groups of the city. He hoped that the Federation of industry and Commerce at all levels and the majority of non-public economic personages would unify their thoughts and actions to the deployment requirements of the plenary session of the municipal Party committee, further strengthen their confidence, grasp the general trend, forge ahead, always maintain the correct political direction, firmly promote the development of non-public economy, and make greater contributions to the rise of Zhejiang. At this meeting, Jiang Xiaomeng, chairman of the group company, was elected as the new chairman of the Jinhua City Federation of Industry and Commerce. Jiang Xiaomeng said in his speech that the Federation of Industry and Commerce is a bridge and link between the party and the government to connect with people in the non-public economy, an assistant to the government in managing and serving the non-public economy, and an important window for the interests of the broad non-public economy. it represents the fundamental interests of the broad non-public economy. In the next five years, the new Federation of Industry and Commerce will continue to enhance cohesion and influence based on service; give full play to the role of "guidance" and "bridge", and always maintain sensitivity to the new situation with advanced awareness and long-term vision, and pay close attention to domestic and foreign Industrial development trends and economic development trends, timely discover new situations, study new problems, and act as a bridge between the government and enterprises
2020
07-31
Compilation of Three-year Operation Plan Completed
After many discussions and revisions, the three-year business plan compiled by the group's subordinate enterprises was finalized in early December and compiled into a book. In order to continuously improve the company's core competitiveness and sustainable development capabilities, the group company completed the company's five-year development plan in 2013 after many discussions, and clarified the development concept of "cooperative innovation to strengthen the main business, standardize science and seek development", Put forward the role of cement as a base player and be a cost leader in the regional market; medicine is guided by scientific and technological innovation and a market leader in segmented fields. And on this basis, the specific strategic objectives and development direction are formulated. In the second half of this year, on the basis of the pilot medium-and long-term economic responsibility system of the International Trade Company and Jinhua Pharmaceutical Company, the company requires each industrial sector to prepare its own three-year business plan. This is not only one of the actions to implement the strategic plan of the group company, but also an extension of the development strategy of the group company. After full discussion and revision, the current three-year business plan has been compiled into a book, which will become the work guide for the company's professional companies and directly affiliated enterprises in the future. The preparation of medium and long-term development plans, so that the company's managers at all levels more clear about the future direction of development, to be able to develop work objectives and work plans with a long-term vision, to avoid short-sighted behavior in management, the work of the enterprise to do fine, solid, detailed, and at the same time more fully and effectively mobilize the enthusiasm of personnel at all levels. The company requires subordinate enterprises to do a good job in the publicity and implementation of the "three-year business plan" of the enterprise, and in the annual work objectives
2020
07-31
Compilation of Three-year Operation Plan Completed
After many discussions and revisions, the three-year business plan compiled by the group's subordinate enterprises was finalized in early December and compiled into a book. In order to continuously improve the company's core competitiveness and sustainable development capabilities, the group company completed the company's five-year development plan in 2013 after many discussions, and clarified the development concept of "cooperative innovation to strengthen the main business, standardize science and seek development", Put forward the role of cement as a base player and be a cost leader in the regional market; medicine is guided by scientific and technological innovation and a market leader in segmented fields. And on this basis, the specific strategic objectives and development direction are formulated. In the second half of this year, on the basis of the pilot medium-and long-term economic responsibility system of the International Trade Company and Jinhua Pharmaceutical Company, the company requires each industrial sector to prepare its own three-year business plan. This is not only one of the actions to implement the strategic plan of the group company, but also an extension of the development strategy of the group company. After full discussion and revision, the current three-year business plan has been compiled into a book, which will become the work guide for the company's professional companies and directly affiliated enterprises in the future. The preparation of medium and long-term development plans, so that the company's managers at all levels more clear about the future direction of development, to be able to develop work objectives and work plans with a long-term vision, to avoid short-sighted behavior in management, the work of the enterprise to do fine, solid, detailed, and at the same time more fully and effectively mobilize the enthusiasm of personnel at all levels. The company requires subordinate enterprises to do a good job in the publicity and implementation of the "three-year business plan" of the enterprise, and in the annual work objectives
2020
07-31
Since the beginning of the 2016 qualification evaluation work of the group company in late November, it has been carried out in an orderly manner according to the established procedures. Compared with previous years, this year, according to the actual situation of the company, new cement plate job settings and development channels and other content. According to the provisions of the Company's Measures for the Administration of Staff Qualifications, the scope of application of the qualification assessment is for all employees of the Group's non-administrative position series, which is divided into three categories: management, technology and technical operation. Among them, the management and technical categories are divided into five grades, each with 2-4 grades; the mechanic operation category is divided into four grades, each with 2-4 grades. The Group Company establishes a qualification evaluation committee, which is responsible for guiding the evaluation of the qualifications of the Group Company, and conducting the evaluation of the qualifications of each department (office) of the Group Company and the qualifications of four levels and above within the scope of the Group Company; professional companies and directly affiliated enterprises establish an evaluation organization, which is responsible for the evaluation of the qualifications of the enterprise and subordinate enterprises at level 3 and below; the Human Resources Department of CNPC is responsible for organizing the review work and carrying out the transactional work of qualification management. Compared with previous years, the company has made a supplementary revision to the "Measures for the Administration of Employee Qualifications" this year, adding a "cement sector position setting and development channel", aiming at the actual situation and professional characteristics of the current two cement companies implementing job optimization, positions such as safety and environmental protection management, sales management, procurement, warehouse management, quality management, equipment maintenance (management), electrical maintenance (management), process operation, inspection workers, etc. are set up respectively, and different levels are divided, and corresponding evaluation standards are set. In accordance with the Management Measures, the post
2020
07-31
Compilation of Three-year Operation Plan Completed
After many discussions and revisions, the three-year business plan compiled by the group's subordinate enterprises was finalized in early December and compiled into a book. In order to continuously improve the company's core competitiveness and sustainable development capabilities, the group company completed the company's five-year development plan in 2013 after many discussions, and clarified the development concept of "cooperative innovation to strengthen the main business, standardize science and seek development", Put forward the role of cement as a base player and be a cost leader in the regional market; medicine is guided by scientific and technological innovation and a market leader in segmented fields. And on this basis, the specific strategic objectives and development direction are formulated. In the second half of this year, on the basis of the pilot medium-and long-term economic responsibility system of the International Trade Company and Jinhua Pharmaceutical Company, the company requires each industrial sector to prepare its own three-year business plan. This is not only one of the actions to implement the strategic plan of the group company, but also an extension of the development strategy of the group company. After full discussion and revision, the current three-year business plan has been compiled into a book, which will become the work guide for the company's professional companies and directly affiliated enterprises in the future. The preparation of medium and long-term development plans, so that the company's managers at all levels more clear about the future direction of development, to be able to develop work objectives and work plans with a long-term vision, to avoid short-sighted behavior in management, the work of the enterprise to do fine, solid, detailed, and at the same time more fully and effectively mobilize the enthusiasm of personnel at all levels. The company requires subordinate enterprises to do a good job in the publicity and implementation of the "three-year business plan" of the enterprise, and in the annual work objectives
2020
07-30
"Peak" was identified as China's well-known trademark
Recently, the Trademark Office of the State Administration for Industry and Commerce issued a document that the "Jianfeng" trademark held by Jianfeng Pharmaceutical Company was recognized as a well-known trademark. The main contents of the "Reply of the Trademark Office of the State Administration for Industry and Commerce on the Identification of" Jianfeng "Trademark as a Well-known Trademark" (Shang Standard Chi Zi [2016] No. 121) are as follows: according to the relevant provisions of the Trademark Law, the regulations for the implementation of the Trademark Law and the provisions on the identification and protection of well-known trademarks, after examination and research, it is recognized that the registered trademark of "Jianfeng" used by Zhejiang Jianfeng Pharmaceutical Co., Ltd. in category 5 of the International Classification of Goods and Services for Trademark Registration is a well-known trademark. The identification of the well-known trademark has effectively enhanced the brand value of the company, helped to improve the popularity of the company's products, and further strengthened the protection of the "peak" trademark. (Zhou Hengbin) News link: "well-known trademark" (Well-knownTradeMark), also known as well-known trademark, first appeared in the Paris Convention for the Protection of Industrial property signed in 1883. According to international and domestic intellectual property laws and regulations, the well-known trademark system is created to fully protect the legitimate rights and interests of well-known trademark owners. Its purpose is to reasonably protect the relevant trademark ownership, maintain fair competition, and stop infringement of others' trademark exclusive rights. behavior. China joined the Convention in 1984, according to the provisions of the Convention to give special legal protection to well-known trademarks, has become an important part of China's trademark legal work. Well-known trademarks in China (ChinaFam
2020
07-31