News Center

Home page

Peak Report

News reports

Selected Essay on Quality Month of Pharmaceutical Company

Release time:

2022-12-04

drugs

during the national day, a relative in the village came to me with two boxes of metformin hydrochloride englijing tablets, saying that one of his two boxes of drugs was prepared by the hospital and the other was bought at the pharmacy. The drugstore recommended another one because it did not have the kind that the hospital matched, saying that the effect was the same, but he always felt that the effect was not good after taking it back and wanted to ask whether the psychological effect or the drug effect was really different.

For most drug users, the intuitive effect after taking drugs is all the drug quality connotation they can understand. The drug market is full of flowers. There are dozens or even hundreds of manufacturers of the same drug. It is really difficult for consumers to judge which is better. In order to improve the quality of drugs, pharmaceutical manufacturers need to ensure their effectiveness, safety, stability and uniformity to the greatest extent. In addition, through the reasonable control of production costs, the market competitiveness of products should be enhanced to ensure the economy of drug use by consumers. On my first day at the pharmaceutical factory, I was trained on the concept of

drug quality is not tested, but produced " . In my work practice, I have deeply realized that the quality of drugs is not only based on the test results, but also on the test reports. Changes, deviations, complete quality system, qualified production personnel, raw materials provided by qualified suppliers, confirmed production equipment, good environment, and standardized implementation of production operating procedures, each link is an important part of drug quality. Any changes in production, any fluctuations that deviate from established parameters, need to be addressed through risk assessment. There is a long way to go to ensure the quality of drugs and ensure the life, health and safety of the drug user. The peak is making continuous efforts and striving forward ... With the encouragement of innovative drugs at the national policy level and the comprehensive promotion of drug consistency evaluation, drug manufacturers are facing the survival of the fittest, and the phenomenon of good and bad drugs on the market will come to an end. As a member of the drug production process, I will do my best to work with other members of the team to earnestly perform my duties and effectively ensure the safety of each drug. I firmly believe that the upcoming development of the peak brand metformin hydrochloride nglijing tablets will become The first choice for the majority of diabetic patients.

(Ye Ke, Workshop G01

, Xinjinxi Factory Area)

During the quality activity month of Flight Inspection

, the pharmaceutical company carried out a series of colorful activities around quality, such as hanging banners in the factory area, holding knowledge lectures, setting up learning groups, collecting short videos, and answering knowledge.

coincided with the on-site verification of the

CM082

project by the national bureau and provincial bureau inspectors during the quality month activities. After the inspection, the person in charge of quality sighed and said: "Our employees are becoming more and more confident when facing the inspection. " Looking back on the inspections experienced these years, I also feel a lot of emotion. When I first checked, I was afraid that the inspector would point out the defects, always thinking that the fewer defects, the better. This incorrect mentality has led me to always worry about gains and losses when facing inspections, and regard reducing the lack of clauses as my first priority. Be complacent because there are few defective clauses, and upset because there are many defective clauses. In the face of inspection will be anxious, answer the inspector's questions will be nervous, and even afraid to answer questions. After flight inspection and verification, rectification and correction, our quality system is gradually complete. The gradual improvement of the document system also gave me confidence, because every step of the operation and records are based on evidence, and I can answer the inspector's questions in an orderly manner against the internal documents. Slowly, I changed my position from being inspected to being a student, and the inspector was my best teacher. Now, for their own management difficulties, I will take the initiative to consult the teacher, hoping to get some advice from the teacher. The examination teacher will often patiently answer my questions and answer my doubts. Look! The inspector is not so terrible as imagined, but a group of persistent and lovely people.

As the saying goes

gold is not barefoot, no one is perfect " , there is no perfect enterprise in the world, and every enterprise has some defects and deficiencies more or less. As long as we do our job well, do not cheat or cheat, sincerely and humbly listen to the teacher's teachings, frankly accept the defects pointed out by the teacher, understand and actively and thoroughly rectify, our quality management will become more and more comprehensive. However, there is no end to quality management. It still requires generations of quality people to strengthen their beliefs, face quality management with the spirit of craftsmen, and contribute their own strength to achieve a century-old peak. We 've been on the road! ( QC

A Fu Junli)

My post and my quality responsibility

The first sight of this topic aroused my deep thinking. As a workshop manager, facing the production line, how should the quality responsibility of this post be reflected and continued? In fact, the quality responsibility of the post is the responsibility of the whole staff, while I play the role of supervising, executing, summarizing, deepening and training the executor of a circular process.

, as the executor, should fully interpret the contents of the existing documents, sort out the key quality control points of each product, each post and each equipment operation from the documents, and strengthen the memory of the operators in the training, so as to avoid the existing irregularities that have been found and have countermeasures as much as possible in the subsequent production. For example, according to the pipeline design of the preparation system, it is necessary to confirm that the bottom valve of the tank is closed before use after cleaning and sterilization. If it is not closed, the preparation operation should be stopped, and there are regulations in the document and records should be formed to effectively prevent leakage accidents.

Secondly, during the inspection process, with the interpretation of existing documents, communicate effectively with employees, and analyze potential problems in the production operation process such as process and equipment from the perspective of employees, or problems that employees have found but have not formed documents and records. For example, the newly purchased high-speed labeling machine of eye drops production line, after communicating with the operators during the on-site inspection of the production process, found that attention should be paid to whether the labeling position and printing position of the label drift after label replacement. After the ribbon is replaced, check and confirm the printing effect and whether the ribbon position is not correct. When the production process is stopped, the roller products entering the labeling machine need to be empty. There is no description of relevant contents in the troubleshooting of

manufacturer's data. They are all summarized by the workshop according to the actual operation process and confirm whether other labeling machines have the same problems. These precautions are added to the standard operating procedures of labeling machines to prevent the occurrence of such problems. The same applies to other equipment. During operation, attention should be paid to whether changes will be caused by similar replacement of packaging materials, materials or components.

Finally, as managers, they should make an in-depth analysis of the problems found in the inspection, add inspection or operation contents to the corresponding documents and records after summarizing, then carry out timely training, and confirm the implementation and elimination measures in the future inspection. In this way, a cycle of supervision, implementation, summary, deepening and training is formed, and the quality responsibility is continued in the form of documents and records.

The responsibility for quality is endless, and it is always necessary to set the quality policy of the enterprise

" to pursue excellent quality; to be a high-quality medicine for the benefit of human society! "is printed in the mind, keep learning and updating, and be the continuator of quality responsibility! (Preparation Workshop

Fang Ling)

More information

Jingmai Airport Test Flight Successfully Runway Cement Spike Manufacturing

On April 7, a Boeing 737-700 aircraft of China Eastern Airlines Yunnan took off from Kunming. After completing two flight test subjects, it landed safely at Lancang Jingmai Airport. This not only marked the basic completion of the airport flight area, The official start of the test flight also marked that the "Peak" brand airport runway cement passed the first "final exam". Lancang Jingmai Airport is a major project with milestone significance in the history of Pu'er transportation construction. Since then, an air corridor connecting southwest Yunnan and Southeast Asia has been added between Kunming and Pu'er, which will greatly promote the development and utilization of tourism resources in Lancang, Menglian and Ximeng "Pu'er Green Triangle" area, and promote the sustainable development of local economy and society; it is of great significance to strengthen the city's national defense construction, maintain border stability, promote national unity, improve emergency rescue capabilities, and promote Pu'er's integration into the country's "Belt and Road" construction. Since the start of the construction of the airport, Yunnan Jianfeng has been paying close attention to it, organizing technical research and repeated tests, and finally produced high-quality airport runway special cement, and with excellent product quality, superior product performance and high-quality service, it has become a runway for Lancang Airport. Cement manufacturer. This not only fills the gap of "peak" airport special cement, but also is of great significance to promote the "peak" brand and improve the market influence of enterprises. It is understood that Jingmai Airport is initially confirmed to be officially opened to traffic at the end of May. (Li Liangping)

2020

07-31

Jianfeng Pharmaceutical Artificial Niuhuang Project Starts

News from this newspaper Jianfeng Pharmaceutical artificial bezoar technical transformation project recently started construction in Qiubin Factory. Artificial bezoar has the effect of clearing away heat and detoxification, resolving phlegm, and is commonly used in Chinese and Western medicines such as colds, clearing away heat and detoxification. As the vast majority of artificial bezoar-related preparations are national essential drugs, with the further implementation of the medical reform policy, the downstream industry of artificial bezoar will enter a new round of business cycle. Jianfeng Pharmaceutical has many years of experience in artificial bezoar production. The technological transformation project will use the existing workshop structure, public works and operators of Qiubin Factory to achieve an annual production capacity of 100 tons of artificial bezoar by adding production equipment such as double cone rotary vacuum drying, horizontal ball mill pulverizer unit, hopper and hoist, closed screening system, and upgrading some public systems. According to the project implementation plan, the project will complete the civil engineering in May. Complete the commissioning, testing and verification of equipment and facilities in July, with trial production conditions; Strive to complete the on-site inspection of GMP certification before the end of December. At present, the factory buildings in Qiubin are vacated and the site is cleaned up. It is understood that the production of natural bezoar is very small, the price is extremely high, and the market rarely provides it. As a biochemical API, artificial bezoar has fewer manufacturers. In the past, due to relatively loose supervision, the testing methods of raw materials and finished products are relatively simple, the quality control indicators are not perfect, and the quality of products on the market is uneven. It is imperative to improve the quality standards. To this end, the State Food and Drug Administration issued the "Biochemical Drug GMP Quality Management Practice (Draft for Comment)" at the end of 2016, which was implemented in March 2017. spike medicine

2020

07-31

Jianfeng Health won many honorary titles such as "Science and Technology Small and Medium-sized Enterprises in Zhejiang Province"

Recently, Jianfeng Health has been awarded a number of plaques and certificates by the Department of Science and Technology of Zhejiang Province, the people's Government of Jinhua City, and the Science and Technology Bureau of Jinhua City. They are "Zhejiang Science and Technology small and medium-sized Enterprises", "Jinhua High-tech Enterprises", "Jinhua Agricultural Science and Technology Enterprises", "Jinhua Agricultural Science and Technology Research and Development Center" and so on. According to the relevant requirements, Zhejiang science and technology-based small and medium-sized enterprises must be small and medium-sized enterprises with independent intellectual property rights, proprietary technology or advanced knowledge, engaged in the research, development, production, sales and service of high-tech and its products, and the proportion of enterprises engaged in scientific and technological research and development personnel accounting for no less than 10% of the total number of employees in that year. Since its establishment, Jianfeng Health has attached great importance to the training of scientific and technological personnel, paid attention to the application of its own intellectual property rights, paid attention to product research and development and the protection of intellectual property rights, promoted the application of intellectual property rights, and encouraged employees to invent and create. By the end of 2016, a total of 8 invention patents and 5 appearance patents had been applied, and 1 invention patent and 5 appearance patents had been obtained. High-tech enterprises in Jinhua City must meet the requirements of the ''High-tech Fields Supported by the State, ''and continue to carry out research and development and technological achievements transformation. Their main products (services) have independent intellectual property rights (authorized, registered or accepted). There are certain requirements for the proportion of R & D personnel, the proportion of R & D funds and the income of high-tech products. The acquisition of high-tech enterprises in Jinhua City has laid the foundation for the further declaration of national high-tech enterprises in the future. In the identification of agricultural science and technology enterprises in Jinhua City, the field of peak health technology belongs to the deep processing technology and equipment of agricultural products, Chinese herbal pieces and plant extracts.

2020

07-31

Jingmai Airport Test Flight Successfully Runway Cement Spike Manufacturing

2020

07-30

Peak Pharmaceutical was rated as a national intellectual property advantage enterprises

The score ranked first among Jinhua participating enterprises. A few days ago, Peak Pharmaceutical Company was rated as a national intellectual property advantage enterprise. The selection of national intellectual property advantage enterprises is organized by the State Intellectual Property Office. The purpose is to accelerate the formation of a group of Chinese intellectual property leading enterprises with independent intellectual property rights, well-known brands and international competitive advantages, and achieve the development goal of strong intellectual property enterprises. Since Jianfeng Pharmaceutical introduced the GB-T29490-2013 "Enterprise Intellectual Property Management Standard" in 2013, it has been rated as a patent demonstration enterprise in Zhejiang Province in 2013. In 2014, the "Jianfeng" trademark obtained a famous trademark in Zhejiang Province, and the first edition of the "Intellectual Property Manual" was compiled and implemented in 2015. In 2016, it passed the third-party certification of the GB-T29490-2013 "Enterprise Intellectual Property Management Standard". The "Jianfeng" trademark was rated as a well-known trademark by the State Administration of China. In the application and selection of national knowledge by superior enterprises, 52 enterprises in Zhejiang Province won this honor, ranking second in the country in number; Jianfeng Pharmaceutical ranked first among Jinhua participating enterprises. (Zhang Mingyin)

2020

07-31

Group Party Committee to determine the annual work plan

The party Committee of the group company has determined its work ideas and work plan for 2017 a few days ago, and relevant work has been arranged below. In view of the current new political and economic situation and the task of enterprise transformation and development, the general requirements of the Party Committee of the Group Company for 2017 are: to thoroughly study and implement the spirit of the Sixth Plenary Session of the 18th CPC Central Committee and the series of important speeches by General Secretary Xi Jinping, the spirit of the Seventh Party Congress of Jinhua City, to closely revolve around the center of enterprise production, operation and reform and development, and to adhere to scientific development and cross-regional development as the first priority, in order to continue to carry out the study and education of "five stars striving for innovation" and "two learning and one doing", we should highlight the main line of comprehensively and strictly administering the party according to the rules, firmly establish the political consciousness, overall situation consciousness, core consciousness and alignment consciousness of the majority of Party members and cadres, strengthen and improve the party building work in enterprises in the spirit of reform, and strive to improve the scientific, standardized and institutionalized level of Party building work in enterprises, in order to promote the scientific development of the group company, leapfrog development and harmonious development, it provides a strong political, ideological and organizational guarantee. The working idea of the Party Committee of the Group Company in 2017 is to focus on "one center", adhere to "one concept", highlight "three key points" and do a good job in "three constructions". That is: centering on the "one center" of enterprise production, operation and reform and development, we should strive to strengthen the "one concept" of "the organic unity of the party's leadership and the improvement of corporate governance"; to "thoroughly implement the main responsibility of the party committee; continue to carry out the study and education of" two learning and one doing "; and improve the system of party building work" as the "three key points", and focus on "team building and team building

2020

07-31

< 1...47 48 49...61 > 跳转到页