News Center

Home page

Peak Report

News reports

Yunnan Peak Uses Staggering Peak Production to Make Technical Transformation

Release time:

2022-08-24

Following the replacement of the high-efficiency fan by the coal vertical mill ventilator in July

#, the power consumption of Yunnan peak system has decreased, but the pressure difference of the large cloth bag is still as high as

3千帕, which is quite different from the 1千帕 of 2 at the beginning of the design, which not only affects the ventilation in the mill, but also affects the efficiency of the ventilator. For this reason, Yunnan peak actively communicated with the manufacturer of large bag dust collector at the beginning of 7 , and determined that the dust collector shell should be raised by 1 meters, and the filter bag and bag cage should be increased by 1 meters to increase the filter area and reduce the wind speed. at the same time, a single air chamber should blow the dust from the filter bag to separate each filter bag, drag reduction optimization scheme for improving injection efficiency. In addition, the resistance reduction transformation of large cloth bags for coal vertical mills was started in 8 September. After nearly half a month of construction, the main work was completed two days ahead of schedule and the machine test stage was entered. This technological transformation will effectively reduce the filtering wind speed and pressure difference of the large bag dust collector, and the specific impact on the output and the efficiency of the ventilator has yet to be tested in subsequent production. is affected by sulfur, alkali and other components in the original combustion material or unreasonable operation control will cause crust in the smoke chamber at the end of the kiln. Serious crust will greatly increase the labor intensity of employees, in high temperature environment exposure time will bring danger, while the growth of crust will also reduce the inner diameter of the smoke chamber shrinkage, resulting in reduced ventilation area, kiln ventilation decreased, resulting in the destruction of kiln system conditions, resulting in a greater impact on the quality of production. At present, the inner diameter of the constriction of the smoke chamber of 3200t/d

clinker production line is

2.3 m. when the crust is not serious, the daily production can reach

4600t/d

. when the crust is not serious, the oxygen content in the kiln is greatly reduced, and the hourly production is difficult to stabilize. During the staggered peak production of 8 months, Yunnan Jianfeng removed the traditional anti-crust castable for the shrinkage of the smoke chamber and replaced it with nano-metal ceramic microcrystalline bricks. Microcrystalline cermet materials have the advantages of excellent anti-skinning performance, excellent wear resistance, stable high temperature resistance, excellent acid and alkali corrosion resistance, and convenient installation and construction. After 3 days of construction, it will be completed on 8 15 , which will be of great help in reducing the labor intensity and operation risks of employees and stabilizing the quality of kiln system. (Song Xiaofei)

More information

Representatives of the 20th Congress preached the 20th Congress at the peak.

On the afternoon of November 11, a special lecture on the spirit of the Party's 20th Congress was held in the conference room of the Peak Building. Yang Xiayun, a representative of the 20th National Congress, walked into the peak and preached his understanding of the spirit of the 20th National Congress for Party members through personal experience.

2022

11-23

The group party committee organizes and learns the twenty spirits.

On the afternoon of October 28, the party Committee of the group organized all members to hold a special study meeting to earnestly study and understand the communique of the first plenary session of the 20th central Committee of the communist party of China and the revision of the party constitution. Jiang Xiaomeng, Secretary of the Party committee of the group, stressed at the study meeting that the 20th National Congress of the Communist Party of China has drawn a grand blueprint for building a socialist modern country in an all-round way, opened a new chapter in the era of national development, and pointed out the direction for the future development of enterprises. Party organizations at all levels of the group should pay full attention to and earnestly implement it, actively organize party members and cadres to learn the spirit of the spirit of the 20th National Congress, And to guide the future work practice.

2022

11-01

Spike Party Members and Cadres Watch the Opening Meeting of the 20th Congress

At 10 a.m. on October 16, the 20th National Congress of the Communist Party of China was solemnly opened in the Great Hall of the People in Beijing. Xi Jinping delivered a report to the Party's 20th National Congress on behalf of the 19th Central Committee. The group company attaches great importance to and carefully deploys, and organizes all party members and management backbones of the group headquarters and subsidiaries to watch the live broadcast of the opening meeting through the Internet, TV and other methods.

2022

10-23

Provincial torchbearers, there are two spikes!

2022

10-08

Jiang Xiaomeng was hired as the "Shuanglong Escort" entrepreneurial mentor.

On September 16, Jiang Xiaomeng, Secretary of the Party committee and chairman of the group company, was employed as the entrepreneurial mentor of "Shuanglong escort" at the launching ceremony of the special action of "Shuanglong escort steady progress and quality improvement" held in Jinhua City and the promotion meeting of innovative products of key talent enterprises in Jinhua City.

2022

09-27

The 12th Congress of Zhejiang Federation of Industry and Commerce Held in Hangzhou Chairman Jiang Xiaomeng Re-elected Vice President of Provincial Chamber of Commerce

From August 18th to 19th, the 12th Congress of the Zhejiang Federation of Industry and Commerce was held in Hangzhou, and the 12th leadership of the Provincial Federation of Industry and Commerce was elected. Jiang Xiaomeng, Secretary of the Party Committee and Chairman of the Group, was re-elected as Vice President of Zhejiang Chamber of Commerce.

2022

09-01

< 1...3 4 5...61 > 跳转到页