The peak people who protect production and fight the scorching heat.
Release time:
2022-08-24
is already beginning of autumn, the hot weather is still continuing in Daye, Hubei province. "god" has no intention of cooling down at all. on the contrary, the temperature has risen to 43 ℃. As soon as the sun came out, the ground was already like a fire, baking the earth so hot that even the air was hot, and people sweated when they moved.
In the first line of the production site of Daye Peak Cement Company, ordinary and ordinary peak people are adhering to the peak spirit of "determined to climb the peak and bravely climb the peak", challenging the high temperature and harsh conditions, strictly following the post operation procedures and inspection and maintenance requirements, meticulously completing their work and composing praises of tenacious struggle.
preheater precalciner cleaning smoke chamber crust is an important work that must be carried out every day for large inspection, and is a key step to ensure the quality of kiln system. Clean up the crust in the smoke chamber of the preheater calciner. The temperature on the site is as high as 50 to 60 degrees Celsius. The work site can clearly feel a wave of heat coming head-on, which makes people feel fearful. When I arrived at the scene, I happened to meet the chief inspector and the post worker doing the job of cleaning up the crust. Post workers wearing thick fire clothing, according to the cleaning process, carefully and skillfully step by step operation. It normally takes about 30 minutes to clean the crust in the smoke room. Considering that the site is a high-temperature operation, the operation is rotated by two people. At the moment when the post worker took off the fire cap and fire suit, the big beads of sweat poured down the cheeks, and the work clothes were already soaked with sweat, and the whole person seemed to be fished out of the water. From his resolute and calm expression, we can imagine their professional ethics and strong willpower.
The planned mandatory shutdown inspection is a guarantee to ensure the continuous operation of the equipment and an important measure to improve the effective operation rate of the equipment and save energy and reduce consumption. At high temperatures, electrical and mechanical equipment such as motors, bearings, oil, and water have successively experienced temperature increases, increasing the risk factor. Therefore, regardless of equipment, electrical, process all need more careful inspection. During inspection and maintenance, most of these equipment are equipped with rain-proof or noise-proof sealed sheds. In the sealed sheds of steel structures at high temperatures, in addition to the temperature rise caused by the sun, the heat generated by the heat dissipation of the equipment also increases the temperature of the sealed sheds. It is not difficult to imagine the hardships of inspection and maintenance in the sealed sheds.
met electrician master Wang who was replacing the thermocouple for the preheater at the scene. when asked about his feelings during the on-site maintenance at high temperature, he stretched out his palm to show me and said: "after replacing the thermocouple just now, his hand was placed on the railing of the handle of the rest platform for a while, and he felt burned." Sure enough, there was a reddish mark under his palm that had not completely subsided. However, master Zhang, a post worker who often enters the cement mill and cleans the screen and grate joints in the mill, said when talking about the feeling of working in the high temperature season: "the cement mill is scheduled to shut down during the peak electricity period, which is the highest temperature of the day. the cement mill that has just stopped is like a big oven, with hot iron bumps everywhere. in such an environment, the grate joints are cleaned, not without stamina. However, the planned shutdown cannot delay the start-up time. All inspections and cleaning must be completed as required. We cannot delay production." A few words, reflecting the different feelings of work, it is that conscientious work habits and persistence and persistence to work, so that the quality of cement mill production has been improved step by step.
One by one silent outstanding deeds spread at the production site of Daye Peak, without flowers and gorgeous praises. With their enthusiasm for work, a spirit of love and dedication and a hot heart, they are not afraid of the high temperature environment and the hardships of labor, and silently contribute their strength to the development of the peak cause. (Huang Bide Chen Cuihong)
More information
The company's vocational skill level self-identification training began.
After preparing the handout materials and question bank for the previous stage of vocational skill grade identification training, daye peak cement company conducted the vocational skill grade identification training for the machine repair team of the manufacturing department on August 10. On August 12 and 18, the pharmaceutical company also organized two phases of vocational skill level identification training for pharmaceutical preparation workers. According to the national skill level standard, the group company is divided into four grades: grade 5/junior worker, grade 4/intermediate worker, grade 3/senior worker and grade 2/technician. According to the analysis of employee registration, since there is only one type of job for pharmaceutical preparation workers, and cement production workers include cement central controller, cement quality inspector, cement clinker calciner, cement manufacturer, cement production inspection worker and other types of jobs, the number of applicants is less than that of cement production workers. Most of the employees who signed up were identified as participating in the four levels of vocational skills. According to preliminary statistics, there are now 155 employees who have signed up for their professional skill level, including 47 pharmaceutical preparation workers and 108 cement production workers. The human resources department of the group company is stepping up efforts to organize personnel to examine the qualifications of the employees whose registration grades are identified, and then enter the Zhejiang professional ability integration platform for formal registration after passing the examination. According to the national vocational skill standards and other content, each unit carries out targeted training for employees who participate in the independent identification of vocational skill levels. The training is conducted through on-site teaching, online teaching, and learning platform question bank exercises. After the training, the group company will organize the employees who participate in the grade identification to carry out examination and assessment, and those who pass the examination will complete the grade identification and issue the skill grade certificate. It is understood that in order to ensure the quality of vocational skill level identification, after the company was approved to independently identify the vocational skill level, the human resources department of the group organized all units to compile the question bank for various types of work in combination with the actual situation of the enterprise and with reference to the national vocational skill standards and training syllabus and other materials. after classification, unification and standardization, verification and proofreading, the preparation of the question bank has been basically completed. After being submitted to the superior unit for examination and approval, the company will import the question bank on the enterprise university platform to facilitate employees to prepare for the examination. The question bank for the independent identification of vocational skills level will also be extracted from the question banks of various industries, including professional ethics, basic knowledge, safety and environmental protection knowledge, laws and regulations knowledge, professional work practice and other national vocational skills standards. Basic requirements. The examination and assessment for independent determination of vocational skill level is tentatively scheduled for mid-September.
2021
08-23
Hu Guoyun, vice mayor of Pu'er, visited the peak
On July 16, a delegation led by Hu Guoyun, vice mayor of Pu'er City, Yunnan Province, and heads of Pu'er SASAC, Industrial Park Management Committee, Investment Promotion Bureau and other departments visited the headquarters of the group company. In the exchange with Jiang Xiaomeng, Yu Jianhong and other group leaders, Hu Guoyun expressed his gratitude to Jianfeng Group on behalf of the Pu'er Municipal Party Committee and Municipal Government. He said that the investment and entrepreneurship from Jianfeng to Pu'er not only promoted the development of Pu'er's regional industrial economy, but also made outstanding contributions to the local poverty alleviation. The two sides also exchanged and discussed issues such as strengthening in-depth cooperation between the two sides.
2021
07-21
Municipal SASAC Party Committee Visited Jianfeng Old Party Member
On June 28, Huang Zunhui, a second-level researcher of the State-owned Assets Supervision and Administration Commission of Jinhua City, visited Jianfeng Group and made a special trip to visit two retired party members, Chen Bingxiang and Yin Rongfu. Among the two Jianfeng veteran party members, Chen Bingxiang has been engaged in party affairs for nearly 30 years, and Yin Rongfu has won the honor of outstanding party members in Zhejiang Province and is a representative of Jianfeng party workers and party members. On behalf of the party committee of the Municipal State-owned assets Supervision and Administration Commission, Huang Zunhui expressed condolences to the two veteran party members, thanked the older generation of party members for their contributions, and exchanged views with Jiang Xiaomeng, secretary of the party committee and chairman of the group, and Qin Xuping, member of the party committee and chairman of the trade union, and fully affirmed the development of peak in recent years and the improvement of the level of party building work.
2021
07-12
"I'll teach you a lesson." Concluded successfully.
On the afternoon of June 24, as one of the highlights of the company's 2021 safety production month series of activities, the second phase of the "I'll give you a lesson" safety training was held at the group headquarters. the management personnel, production backbones and personnel from all departments and offices of the group gathered at the scene. foreign enterprises took safety "big lessons" through video, which was more effective than the teaching. At this point, the "I'll give you a lesson" safety training has come to a successful conclusion.
2021
07-12
Glory in the Party's 50-year-old Party Member Xi Ling Commemorative Medal
On June 23, the party committee of the group company sent a special person to visit and awarded the commemorative medals of "50 years of Glory in the Party" to six veteran party members. 2021 is the 100 anniversary of the founding of the Communist Party of China. For the first time, the Party Central Committee issued the "50 Years of Glory in the Party" commemorative medal to surviving party members who have reached the 50th anniversary of the party and have always performed well. The Organization Department of the Central Committee also specially issued the "Administrative Measures for the Issuance of Commemorative Medals of" Glory in the Party for 50 Years "", which stipulates the issuance procedures, issuance methods, production, and management of commemorative medals. In the future, the "50 Years of Glory in the Party" commemorative medal will be issued as a regular task and will be issued once every year around July 1.
2021
07-12
What is the exact time of the first Congress of the Communist Party of China? Which "big" representatives boarded the red boat in South Lake? What is the connection between the 1972 Sino-US Joint Communique and Hangzhou? On the morning of June 24th, the Party Committee of the Group Company invited members of the Party History Learning and Education Group of Zhejiang Provincial Party Committee and the vice president of Zhejiang Branch of China News Service to give a special party class of "returning to the scene of party history and reappearing the moment of party history" for the party members and cadres of the Company.
2021
07-01
Contact Us
No. 88 Wujiang East Road, Jinhua City, Zhejiang Province, China
Tel: +86-579-82326868
Fax : +86-579-82324666
©2023 Zhejiang Jianfeng Group Co., Ltd. Powered by: www.300.cn SEO Business License
SAF Coolest v1.2 设置面板 SHJSS-AHDB-FSSQE-ZSW
无数据提示
Sorry, the current column has no content !
You can view other columns or return to Home Page