Daye Peak for Cooling Technical Transformation
Release time:
2022-07-03
1 cooling fan in waste heat power generation circulating pool and the technical transformation of 2 cement mill cement storage cooling, and has been officially put into use. Daye Peak Waste Heat Power Generation Circulating Pool has a total of
2cooling fans. Since the establishment of the plant, traditional transmission shafts and reducers have been used to drive the blades. The driving method has the disadvantages of high noise, high transmission loss, large energy loss and deformation of the link diaphragm. With the application of direct drive technology in the market, and the direct drive drive has the incomparable superiority of the traditional drive. For this reason, Daye Peak carried out transmission transformation on 2 cooling fan in 2021 , and achieved the expected results. In order to further promote energy saving and consumption reduction, Daye Peak carried out transmission transformation on the cooling fan of by using medium repair on 5 and 29 . The transformation not only reduces the overall cost of the equipment, but also improves the service life of the equipment, while also saving energy. 6
20, daye peak completed 2# cement mill cement storage cooling technical transformation, and passed the process, equipment, electrical appliances, safety and environmental protection acceptance on 23 . For a long time, the high storage temperature of cement has been a long-standing problem. Daye Peak has successively tried measures such as cooling the materials entering the mill and spraying water in the mill, but the cooling effect is not great. 2021 , Daye Peak uses advanced coolers currently on the market for cement cooling. The cooler realizes indirect heat release based on the principle of reverse flow and immersion, that is, there is no direct contact between the cooled cement and the cooling medium. While the screw conveyor is lifted from the bottom of the cooling cylinder to the discharge outlet on the top of the cooling cylinder, the surface of the cooler cylinder is cooled by a uniform and stable water curtain flowing down along the outer surface of the cylinder. In order to improve the cooling effect, Daye Peak also adds a soaking cylinder at the lower part of the cylinder, so that the lower part of the cooling cylinder is soaked in water at a lower temperature to achieve sufficient heat exchange. When the cooler is put into use, the temperature of the cement out of the mill can be reduced by about 15 ℃, and the temperature of the cement in the warehouse will be well controlled, effectively solving the problem of high temperature of the cement out of the factory in summer, and the performance and stability of the cement will be further improved. (Liu Chao
Chen CuihongLiu Haihua Shi Zhangliang Feng Junwen)
More information
Tianjin Flemish Company Donates Anti-epidemic Materials
On the morning of July 13, Tianjin Jianfeng Flanders Pharmaceutical Technology Development Co., Ltd. donated materials to the Tianjin Development Zone Charity Association to help the development zone community fight the epidemic.
2020
08-05
In late July, leaders of the group company Jiang Xiaomeng, Yu Jianhong, Chen Tianci and Qin Xuping visited subordinate enterprises separately and sent heatstroke prevention and cooling supplies to employees working under high temperature, urging everyone to pay attention to heatstroke prevention and cooling and safe production work to ensure good physical condition.
2020
08-05
On July 17 and 18, the Group's work analysis meeting for the first half of 2020 was held at the Peak Building of the Group's headquarters to summarize and review the work in the first half of the year and make arrangements for the work in the second half of the year.
2020
08-05
The company requires to do a good job in summer safety production
The high temperature season is approaching, and the group company issued a notice a few days ago to make arrangements for safe production in summer.
2020
08-05
The company requires to do a good job in summer safety production
The high temperature season is approaching, and the group company issued a notice a few days ago to make arrangements for safe production in summer. The notice requires all subordinate units of the company to attach great importance to the work of production safety in summer, and all production and business units should hold a special meeting on production safety in summer. According to the characteristics of production in summer, they should focus on safety risk analysis for mines, outdoor operations and high-temperature posts, and implement control measures to avoid the occurrence of safety accidents such as scalding, heatstroke and electric shock. In order to further strengthen the safety production management in the high temperature season, the notice requires the main person in charge of each production and business unit to lead a team to conduct a comprehensive inspection of the production and business premises according to the characteristics of summer production; strengthen the daily safety production inspection of key posts and special posts; timely rectify the found unsafe behaviors and hidden dangers; Strengthen the management of the storage and use of flammable, explosive, dangerous chemicals and drugs; cooling measures shall be taken for the space exceeding the storage temperature limit of articles. If it is found that the electrical equipment circuit and exhaust fan circuit are aged and damaged, replace them in time and keep the grounding wire in good condition. Do a good job in checking the fire pool, pipeline water pressure and fire extinguishing equipment to ensure that the fire fighting facilities are sensitive, intact and reliable. The high temperature in summer is also a period of frequent occurrence of heatstroke and other diseases. The notice requires all units to do a good job in heatstroke prevention and cooling, implement various relevant measures, and equip necessary cooling facilities or materials such as fans, air conditioners, ice cubes and other cooling facilities or materials according to the conditions of the production site; do a good job in the distribution of heatstroke prevention drugs, supplies and cool drinks in workshops, warehouses, construction sites and other production lines; strengthen canteen management to prevent food poisoning. (this newspaper reporter)
2020
07-22
The company requires to do a good job in summer safety production
The high temperature season is approaching, and the group company issued a notice a few days ago to make arrangements for safe production in summer. The notice requires all subordinate units of the company to attach great importance to the work of production safety in summer, and all production and business units should hold a special meeting on production safety in summer. According to the characteristics of production in summer, they should focus on safety risk analysis for mines, outdoor operations and high-temperature posts, and implement control measures to avoid the occurrence of safety accidents such as scalding, heatstroke and electric shock. In order to further strengthen the safety production management in the high temperature season, the notice requires the main person in charge of each production and business unit to lead a team to conduct a comprehensive inspection of the production and business premises according to the characteristics of summer production; strengthen the daily safety production inspection of key posts and special posts; timely rectify the found unsafe behaviors and hidden dangers; Strengthen the management of the storage and use of flammable, explosive, dangerous chemicals and drugs; cooling measures shall be taken for the space exceeding the storage temperature limit of articles. If it is found that the electrical equipment circuit and exhaust fan circuit are aged and damaged, replace them in time and keep the grounding wire in good condition. Do a good job in checking the fire pool, pipeline water pressure and fire extinguishing equipment to ensure that the fire fighting facilities are sensitive, intact and reliable. The high temperature in summer is also a period of frequent occurrence of heatstroke and other diseases. The notice requires all units to do a good job in heatstroke prevention and cooling, implement various relevant measures, and equip necessary cooling facilities or materials such as fans, air conditioners, ice cubes and other cooling facilities or materials according to the conditions of the production site; do a good job in the distribution of heatstroke prevention drugs, supplies and cool drinks in workshops, warehouses, construction sites and other production lines; strengthen canteen management to prevent food poisoning. (this newspaper reporter)
2020
07-31
Contact Us
No. 88 Wujiang East Road, Jinhua City, Zhejiang Province, China
Tel: +86-579-82326868
Fax : +86-579-82324666
©2023 Zhejiang Jianfeng Group Co., Ltd. Powered by: www.300.cn SEO Business License
SAF Coolest v1.2 设置面板 SHJSS-AHDB-FSSQE-ZSW
无数据提示
Sorry, the current column has no content !
You can view other columns or return to Home Page