Unforgettable for the first time.
Release time:
2022-06-21
There are many firsts in my life, the first self-reliance, the first night walk, the first cooking ... But I only remember this time, and it is deep in my mind, the first time in my life to be a mother.
2021 7 12 19 45 , this time point I will never forget in my life. Due to the large size of the fetus and narrow pelvis, the pain lasted for nearly 4 hours, the high fever did not subside, the fetus did not enter the basin, and the natural birth was changed to caesarean section. When I was pushed into the operating room and onto the operating bed, I was shivering, not knowing whether it was because of fear or cold. A doctor was afraid that I would be pressed to death. The anesthesiologist asked me to curl up hard and stick a long needle into my waist. After a while, my lower body was unconscious and my brain was still awake. The reaction of anesthesia made me vomit all the time. I heard the sound of the knife on my stomach, but I was blocked by the green cloth in front of me and couldn't see anything. After that, I felt something pulling out of my stomach, and the machine sucking amniotic fluid made a purring sound. After a while, the child came out. When he pulled it out, he felt that his intestines and stomach had fallen down. Wow! Finally freed.
just heard the doctor say it was a big fat boy and was immediately pushed out of the operating room. When I got to the ward, the nurse came to press my stomach and pressed it three or four times. It was as painful as if I had been stabbed with a knife. As a result, I was afraid when I saw the nurse checking it. I covered my stomach and said not to press it again. The nurse smiled and said not to press it again. In order to avoid the uterine adhesion of the parturient, the doctor asked to get out of bed and walk for the first time after delivery. When I took the first step, I was so painful that I doubted my life. Tears swirled repeatedly in my eyes. Obviously, it was only a few steps away from the bathroom, but it seemed to be thousands of miles away.
Giving birth is the bravest thing I have ever done in my life, and it is also the pain I will never forget in my life. As a mother these days, I realize more and more that it is not easy to be a mother, but seeing the healthy growth of children, I feel that everything is worth it. I remember when mother and son met for the first time, his face was red and crying. I was at a loss and in a hurry. I don't know where to start changing diapers for the first time. It took me half an hour to use up a pack of wet wipes. Although it was clumsy, it was also very happy. It is said that one hour after delivery is the golden time for the baby to suck milk. It is very beneficial for the mother to start sucking milk as soon as possible. However, due to my fever before delivery and after delivery, the doctor did not allow me to breastfeed until the third day after delivery, which led to a long milk chase during the whole month. Papaya Chicken Soup, Liquor Eggs, Carp Soup, Peanut Pig Foot Soup Soup Soup Soup Soup Soup Soup Soup ... , blocked milk and broken skin. Every day, my clothes were wet, and I woke up countless times in the middle of the night to feed him. I collapsed to doubt life, but I could only grind my teeth and insist. No one could replace breastfeeding. Don't you regret it after you ask me? I don't regret it, no matter how hard it is, because every time I see my baby drinking milk with full concentration, I suddenly look up and see my grin, and my heart is sweet in an instant.
Time is fleeting. Before you know it, the baby is almost one year old. You are no longer the silly little baby. Now you are beginning to have your own independent thinking and small temper. One skill is waiting for you to dig and master. The long road of life is waiting for you to embark on the journey.
(Gao Youzhi)
More information
The company's vocational skill level self-identification training began.
After preparing the handout materials and question bank for the previous stage of vocational skill grade identification training, daye peak cement company conducted the vocational skill grade identification training for the machine repair team of the manufacturing department on August 10. On August 12 and 18, the pharmaceutical company also organized two phases of vocational skill level identification training for pharmaceutical preparation workers. According to the national skill level standard, the group company is divided into four grades: grade 5/junior worker, grade 4/intermediate worker, grade 3/senior worker and grade 2/technician. According to the analysis of employee registration, since there is only one type of job for pharmaceutical preparation workers, and cement production workers include cement central controller, cement quality inspector, cement clinker calciner, cement manufacturer, cement production inspection worker and other types of jobs, the number of applicants is less than that of cement production workers. Most of the employees who signed up were identified as participating in the four levels of vocational skills. According to preliminary statistics, there are now 155 employees who have signed up for their professional skill level, including 47 pharmaceutical preparation workers and 108 cement production workers. The human resources department of the group company is stepping up efforts to organize personnel to examine the qualifications of the employees whose registration grades are identified, and then enter the Zhejiang professional ability integration platform for formal registration after passing the examination. According to the national vocational skill standards and other content, each unit carries out targeted training for employees who participate in the independent identification of vocational skill levels. The training is conducted through on-site teaching, online teaching, and learning platform question bank exercises. After the training, the group company will organize the employees who participate in the grade identification to carry out examination and assessment, and those who pass the examination will complete the grade identification and issue the skill grade certificate. It is understood that in order to ensure the quality of vocational skill level identification, after the company was approved to independently identify the vocational skill level, the human resources department of the group organized all units to compile the question bank for various types of work in combination with the actual situation of the enterprise and with reference to the national vocational skill standards and training syllabus and other materials. after classification, unification and standardization, verification and proofreading, the preparation of the question bank has been basically completed. After being submitted to the superior unit for examination and approval, the company will import the question bank on the enterprise university platform to facilitate employees to prepare for the examination. The question bank for the independent identification of vocational skills level will also be extracted from the question banks of various industries, including professional ethics, basic knowledge, safety and environmental protection knowledge, laws and regulations knowledge, professional work practice and other national vocational skills standards. Basic requirements. The examination and assessment for independent determination of vocational skill level is tentatively scheduled for mid-September.
2021
08-23
Hu Guoyun, vice mayor of Pu'er, visited the peak
On July 16, a delegation led by Hu Guoyun, vice mayor of Pu'er City, Yunnan Province, and heads of Pu'er SASAC, Industrial Park Management Committee, Investment Promotion Bureau and other departments visited the headquarters of the group company. In the exchange with Jiang Xiaomeng, Yu Jianhong and other group leaders, Hu Guoyun expressed his gratitude to Jianfeng Group on behalf of the Pu'er Municipal Party Committee and Municipal Government. He said that the investment and entrepreneurship from Jianfeng to Pu'er not only promoted the development of Pu'er's regional industrial economy, but also made outstanding contributions to the local poverty alleviation. The two sides also exchanged and discussed issues such as strengthening in-depth cooperation between the two sides.
2021
07-21
Municipal SASAC Party Committee Visited Jianfeng Old Party Member
On June 28, Huang Zunhui, a second-level researcher of the State-owned Assets Supervision and Administration Commission of Jinhua City, visited Jianfeng Group and made a special trip to visit two retired party members, Chen Bingxiang and Yin Rongfu. Among the two Jianfeng veteran party members, Chen Bingxiang has been engaged in party affairs for nearly 30 years, and Yin Rongfu has won the honor of outstanding party members in Zhejiang Province and is a representative of Jianfeng party workers and party members. On behalf of the party committee of the Municipal State-owned assets Supervision and Administration Commission, Huang Zunhui expressed condolences to the two veteran party members, thanked the older generation of party members for their contributions, and exchanged views with Jiang Xiaomeng, secretary of the party committee and chairman of the group, and Qin Xuping, member of the party committee and chairman of the trade union, and fully affirmed the development of peak in recent years and the improvement of the level of party building work.
2021
07-12
"I'll teach you a lesson." Concluded successfully.
On the afternoon of June 24, as one of the highlights of the company's 2021 safety production month series of activities, the second phase of the "I'll give you a lesson" safety training was held at the group headquarters. the management personnel, production backbones and personnel from all departments and offices of the group gathered at the scene. foreign enterprises took safety "big lessons" through video, which was more effective than the teaching. At this point, the "I'll give you a lesson" safety training has come to a successful conclusion.
2021
07-12
Glory in the Party's 50-year-old Party Member Xi Ling Commemorative Medal
On June 23, the party committee of the group company sent a special person to visit and awarded the commemorative medals of "50 years of Glory in the Party" to six veteran party members. 2021 is the 100 anniversary of the founding of the Communist Party of China. For the first time, the Party Central Committee issued the "50 Years of Glory in the Party" commemorative medal to surviving party members who have reached the 50th anniversary of the party and have always performed well. The Organization Department of the Central Committee also specially issued the "Administrative Measures for the Issuance of Commemorative Medals of" Glory in the Party for 50 Years "", which stipulates the issuance procedures, issuance methods, production, and management of commemorative medals. In the future, the "50 Years of Glory in the Party" commemorative medal will be issued as a regular task and will be issued once every year around July 1.
2021
07-12
What is the exact time of the first Congress of the Communist Party of China? Which "big" representatives boarded the red boat in South Lake? What is the connection between the 1972 Sino-US Joint Communique and Hangzhou? On the morning of June 24th, the Party Committee of the Group Company invited members of the Party History Learning and Education Group of Zhejiang Provincial Party Committee and the vice president of Zhejiang Branch of China News Service to give a special party class of "returning to the scene of party history and reappearing the moment of party history" for the party members and cadres of the Company.
2021
07-01