News Center

Home page

Peak Report

News reports

We interned in the manufacturing department

Release time:

2022-06-13

In February this year, as a salesman of Huang Ping Jianfeng, I had the honor to study in the manufacturing department for a month. This month, I learned a lot of things that I didn't have contact with before. I knew nothing about cement before, and now I have a comprehensive understanding of cement technology and equipment maintenance, which has laid a good foundation for the development of marketing work.

This month, I mainly carried out rotation practice in various workshops. According to the arrangement, I have experienced cement mill system, new dry rotary kiln system and raw material system. As a member of the enterprise, we should first feel the corporate culture, familiar with the work process, adapt to the working atmosphere, followed by learning new knowledge, summing up work experience, and laying a good technical foundation.

Most raw materials for cement production must pass through crushers and roller presses to achieve pre-homogenization (such as limestone, clay, iron ore and coal ash, etc.). Pre-homogenization technology pays attention to the storage and retrieval of raw materials, using scientific stacking and retrieval technology, so that the initial homogenization of raw materials. After I have a preliminary understanding of the raw material production process, the main time is spent in learning equipment maintenance with the monitor. During the overhaul, the colleagues involved in the overhaul were covered with ash or oil stains, but they still stuck to their posts, which moved me deeply. I am well aware of the importance of combining theory with practice. In my future work, I should integrate theory with practice. I should not only learn from books but also continue to consult my colleagues.

When practicing in the rotary kiln system, I often heard such a sentence at the kiln head: firing is the focus of the company, and the kiln head is the focus of firing. This is true. The quality of cement and the size of output depend to a certain extent on the operational skills of front-line colleagues. Usually in marketing, we need to explain the characteristics of cement to customers. Therefore, I often go to the scene to understand the specific production process of cement, and when I don't understand it, I modestly ask the responsible leader or the class leader for advice. Working with colleagues in the workshop, especially the night shift, although it is very hard, but looking at the results of everyone's efforts, I still feel very full.

I like Stalin's words very much: the most precious thing in life is life, what life needs most is study, the most pleasant thing in life is work, and the most important thing in life is friendship. The truly outstanding companies of the future will be organizations that manage to engage people at all levels and have the ability to learn continuously. It is never too old to learn, and the ocean of knowledge is vast. Only by continuous learning and enriching ourselves can we be based on a highly competitive society, make common progress with Jianfeng Group, and meet every challenge.

The sales department I work for not only needs to sell cement, but also is a representative of an enterprise. A successful sales is not an accidental story, it is the result of the learning plan and the application of a salesperson's knowledge and skills. In order to enrich the cement production experience, better sales,

3 6 , I entered the Huang Ping peak manufacturing department to learn the process of production. The purpose of this production practice is to understand the production process, production equipment and production organization structure of the factory. Through production practice, master the specific production process of cement materials, master the formation process of cement clinker, master the working principle and function of various production equipment, cultivate the ability of independent thinking and independent work, supplement knowledge for future sales work, and remain invincible in the same industry sales.

Through this internship, I got professional production labor training, with production practice knowledge, enhance the sales of production knowledge, more fully understand all the processes of cement clinker production, understand the various production measures and rules and regulations of the enterprise, and further cultivate the awareness of safe production. At the same time, it is better integrated into the big family of the peak, laying a more solid foundation for its own development.

(Zhu Hongzhao)

February

6 to 30 , I learned the production process and process of cement in the powder system, preheating system and calcination system of the manufacturing department, and learned about the functions and differences of relevant equipment.

During the study period, the personnel of the relevant departments of the manufacturing department conducted business-related production labor training for our sales staff, reserved production practice knowledge, enhanced the labor concept of our sales staff, and cultivated production practice skills. In the production labor, production technology education and query reading on-site data, we link theory with practice, in-depth understanding of cement production process, technical indicators, production equipment and technical operation, product quality and other related production management and technical level. At the same time, through on-site visits and studies, as well as on-site team explanations, we learned about the factory's production organization system, various production measures and rules and regulations of the factory.

After nearly a month of production study, I have a deeper understanding of the knowledge of cement production, and a better understanding of the cement production process, production equipment and production organization. I put this knowledge and the production theory knowledge learned during the sales period, familiar with the specific production process of cement materials, master the formation process of cement raw material, the working principle and function of various production equipment, and lay a solid foundation for the follow-up business development.

(Chen Jianfei)

This month's study has given me an understanding of the cement process and a deep understanding of the hard work of my colleagues in the production department. With the hard work of front-line colleagues in the workshop and the linkage with other departments, the products can be promoted and our enterprise can flourish. Colleagues in the production line are the producers of the final products, and their hard work is incomparable to ours. I hope that through this study, I can grow rapidly, continue to work hard and strive to do better, and make more contributions to the development of Huang Ping Peak.

(Wu Yunqiao)

More information

Inferior spikes do this

In the eastern corner of the production area of Jianfeng Health Technology Company, there is a very inconspicuous building. From below, only a few pipes of uneven thickness can be seen on the top and the slogan "Focus on Environmental Protection and Promote Sustainable Development" with red letters on the yellow background on the stainless steel guardrail. Walking up, you can only see several closed pools and a small room with stacks of documents, test tubes, glass bottles and other testing tools on the table. This is the peak and healthy sewage treatment station. The production sewage of the whole factory area is concentrated here. After adjustment (PH adjustment), pre-acidification, anaerobic, anoxic, aerobic (aeration), precipitation and other links, it is discharged into the pipe network after reaching the special discharge standard. Yin Zhiwu, executive deputy general manager of Jianfeng Health, said that because the sewage treatment station in Wucheng District has not yet been built, Jianfeng Health has not yet been able to achieve pipe discharge, and the relevant national laws have strict requirements on the discharge of water pollutants from the extraction pharmaceutical industry. Sewage discharge must reach a special discharge limit, that is, chemical oxygen demand (COD) must be less than 50 mg/L. Enterprise development and environmental protection are both the concept of peak health since its establishment. In March this year, on the basis of the original environmental protection facilities, Jianfeng Health carried out technical renovation of waste gas collection and treatment facilities, and at the same time installed a sealing cover on the sewage treatment station to realize the closed collection of waste gas. Since the trial operation of this facility in mid-May, the overall effect has been obvious. The original treatment tank would emit an unpleasant smell during work, but now the smell has been significantly reduced. Compared with the young enterprise of peak health, the relatively "older" peak pharmaceutical has more experience in sewage treatment and environmental protection. Akihama

2020

07-31

2016 Annual General Meeting of Shareholders

News from our newspaper On May 19, the on-site meeting of Jianfeng Group's 2016 Annual General Meeting of Shareholders was held in Conference Room 314 of Jianfeng Building to deliberate and pass the "2016 Annual Report on the Work of the Board of Directors" and other proposals. The meeting was convened by the board of directors of Jianfeng Group and chaired by Chairman Jiang Xiaomeng. A total of 6 shareholders and proxies attended the meeting, and the total number of voting shares held by them was 55,604,815, accounting for 16.16 of the total voting shares of the company. Some directors, supervisors and secretary of the board of directors of the company attended the meeting, and some senior managers attended the meeting as nonvoting delegates. The meeting was held and voted on by a combination of on-site voting and online voting, it deliberated and passed nine proposals, including the 2016 Work Report of the Board of Directors, the 2016 Work Report of the Board of Supervisors, the 2016 Financial Final Accounts Report, the 2016 Profit Distribution Proposal, the Proposal to Hire the Company's 2017 Audit Institution, the Proposal to Provide Guarantee to Holding Subsidiaries, the 2016 Annual Report and its Summary, the Election of Mr. Huang Sujian as Director of the Company and the Election of Mr. Chen Tianci as Supervisor of the Company. (Zhou Hengbin)

2020

07-31

2016 Annual General Meeting of Shareholders

2020

07-31

2016 Annual General Meeting of Shareholders

2020

07-30

Jianfeng Pharmaceutical Won Advanced Collective of Municipal Red Cross Humanitarian Promotion Award

On April 24, the Red Cross Society of Jinhua issued a circular commending the advanced units and individuals of the 2016 Red Cross Humanitarian Promotion Award. Peak Pharmaceutical Company won the Red Cross Humanitarian Promotion Award for Advanced Collective. The Red Cross is a social relief organization engaged in humanitarian work, with the purpose of carrying forward the spirit of humanity, fraternity and dedication, protecting human life and health, and promoting the cause of peace and progress of mankind. As a socially responsible enterprise, Jianfeng Pharmaceutical has always attached importance to public welfare and charity work, vigorously promoted the spirit of the Red Cross, and vigorously supported the work of the Red Cross with practical actions. In September 2016, at the theme publicity activity of "World First Aid Day" and the opening ceremony of the municipal Red Cross emergency rescue station (point), Huang Jinlong, deputy general manager of the group company and general manager of the pharmaceutical company, donated 6 AEDs known as "life-saving artifact" to the Red Cross on behalf of Jianfeng Pharmaceutical, it is equipped with six Red Cross emergency rescue service stations (points), namely, Jinhua high-speed railway station, sports center, cultural center, Shuanglong scenic spot, Siping village scenic spot and Suoyuan village scenic spot. The configuration of AED equipment has played a very good role in improving the emergency rescue capacity of Jinhua's key locations, and has been affirmed by the Red Cross and related units. (Spike Pharmaceuticals)

2020

07-31

Jingmai Airport Test Flight Successfully Runway Cement Spike Manufacturing

On April 7, a Boeing 737-700 aircraft of China Eastern Airlines Yunnan took off from Kunming. After completing two flight test subjects, it landed safely at Lancang Jingmai Airport. This not only marked the basic completion of the airport flight area, The official start of the test flight also marked that the "Peak" brand airport runway cement passed the first "final exam". Lancang Jingmai Airport is a major project with milestone significance in the history of Pu'er transportation construction. Since then, an air corridor connecting southwest Yunnan and Southeast Asia has been added between Kunming and Pu'er, which will greatly promote the development and utilization of tourism resources in Lancang, Menglian and Ximeng "Pu'er Green Triangle" area, and promote the sustainable development of local economy and society; it is of great significance to strengthen the city's national defense construction, maintain border stability, promote national unity, improve emergency rescue capabilities, and promote Pu'er's integration into the country's "Belt and Road" construction. Since the start of the construction of the airport, Yunnan Jianfeng has been paying close attention to it, organizing technical research and repeated tests, and finally produced high-quality airport runway special cement, and with excellent product quality, superior product performance and high-quality service, it has become a runway for Lancang Airport. Cement manufacturer. This not only fills the gap of "peak" airport special cement, but also is of great significance to promote the "peak" brand and improve the market influence of enterprises. It is understood that Jingmai Airport is initially confirmed to be officially opened to traffic at the end of May. (Li Liangping)

2020

07-31

< 1...46 47 48...61 > 跳转到页