Daye Peak Condensing Wisdom to Soluble Problems
Release time:
2022-06-01
5# January 19 , daye peak cement company 6 cement warehouse was cleaned and overhauled, and everything was normal.
This ordinary cement warehouse overhaul caused a collision and blending of electrical and equipment technologies in Daye Peak. In the middle of November, daye peak 6
cement warehouse was overhauled and checked according to the process. as a result, it was found that the ventilation cloth of the inflatable box in the three Roots blower warehouse could not be bulged normally and did not meet the acceptance standard. The pipeline is unobstructed and there is no air leakage. The working condition of Roots blower is normal. What is the problem?After several days of investigation and analysis, the equipment and production supervisor all agree that the problem lies in the air distributor at the bottom of the warehouse. In 2015
, due to inadequate warehouse management at that time, the electric ball valves at the bottom of the cement warehouse were often stuck due to material binding and could not circulate automatically, resulting in serious material binding in the cement warehouse. In order to solve this problem, technicians had to try to change the6# cement warehouse 12 electric ball valves into a traditional air distributor to solve the problem of electric ball valves stuck. However, what did not attract attention at that time was that the working principle of the traditional distributor was uninterrupted switching and the time was very short. As a result, the pressure of the air box in one charging area in the warehouse did not rise, the air pressure was switched to other charging areas, and the air volume was scattered throughout the warehouse, thus the purpose of circulating discharging could not be achieved. The reason for is found out. If it costs 10
yuan to replace the electric ball valve again, and the delivery period is more than half a month, the cement warehouse will not be put into use for a long time."Can Transform and Optimize the Traditional Distributor to Achieve the Effect of Circular Discharging " ? At the morning meeting, a remark by Zhang Fengliang, Deputy General Manager of the Group Company and General Manager of Daye Peak, aroused enthusiastic response from technicians. The consensus is to install a control system for old equipment. Therefore, the equipment, electrical and technical personnel started from the equipment structure of the distributor, determined the arrangement point of the proximity switch, and equipped the waste control box and frequency converter. After debugging, the distributor realized the function of stopping 15 minutes to circulate and divide the air, meeting the requirements of circulating and discharging in the warehouse. It is foreseeable that the failure rate of the distributor will be much lower than that of the electric ball valve in the future. Daye Peak The renovation of the distributor has achieved good results, which has improved the enthusiasm of technicians to cooperate and saved more than 10
yuan in machine material consumption. Daye Peak will also apply for a utility model patent, which also provides new ideas for repairing the old and recycling the waste in the future.(Wang Yiyan)
More information
Peak health marketing and a new "play"
Building a New System, Flattening Management, Spike Health Marketing, New "Way to Work" On February 17, Spike Health Technology Company held a sales meeting to integrate and adjust the construction of a new marketing system and deploy and implement the 2017 sales work. Chen Daiyou, general manager of Health Technology Company, carefully explained and answered the marketing system construction and sales management assessment methods at the meeting, and reached a consensus on unifying thinking. The sales business of Health Technology Company involves three categories: health care products, plant extracts and Chinese herbal pieces. The product attributes and categories are different, and the product sales channels are diversified. In order to facilitate market expansion and adapt to the rapid response to market changes, the Company focuses on key products, key channels and key markets, adjusts the original business model, unifies all sales businesses of the Company, establishes a marketing center, and centralizes and unifies flat management. At the meeting, the Health Technology Company issued the "2017 Sales Management Assessment Measures", which takes sales performance as the leading factor, defines the sales staff's business expenses and market expansion support policies, implements quarterly and annual assessment of sales targets, and directly links the assessment of the progress of sales staff's target tasks with monthly income. After two-way selection, adjustment and implementation of sales positions and target tasks, all sales staff of Health Technology Company have signed a sales economic responsibility system. Chen Daiyou hopes that marketers will build confidence to meet the challenges and grow and progress together with the enterprise. At the same time, he said that the health technology company will focus on strengthening the construction and cultivation of the sales team, and carry out training, learning and experience sharing in various ways, so as to improve the business ability and level of the sales team. (Spike Health)
2020
07-30
2020
07-30
2020
07-31
2020
07-31
On January 23, the group company held a special working meeting to summarize the safety and environmental protection work in 2016 and make arrangements for the work in the new year. General manager Yu Jianhong pointed out at the meeting that hidden dangers are accidents, accidents should be assessed, and safety and environmental protection work should continue to be carried out with a "zero tolerance" attitude. At the meeting, Chen Tianci, assistant to the general manager of the group company and manager of the audit performance management department, summarized the safety and environmental protection work in 2016 from the aspects of the completion of the safety and environmental protection responsibility system objectives, self-examination and self-correction of illegal operations, and the establishment of safety and environmental protection accident-free factories, analyzed the problems existing in the work, and put forward the safety and environmental protection work plan for 2017 in a targeted manner. Jiang Xiaomeng, chairman of the group company, stressed at the meeting that the work of safety and environmental protection is endless and must be carried out unremittingly. All enterprises should focus on safety and environmental protection management in a planned and focused manner according to the characteristics of their respective industries and industries, seasonal changes, and national policy adjustments. It is more important to establish awareness than inspection. It is necessary to strengthen safety and environmental protection education and improve the safety and environmental protection awareness and related work skills of all employees. Conduct in-depth pre-inspection and strict post-assessment to achieve full management and comprehensive prevention, and realize the overall improvement of enterprise safety and environmental protection. At the meeting, Jiang Xiaomeng, on behalf of the group company, signed the 2017 safety and environmental protection work responsibility letter with various professional companies and directly affiliated enterprises. In his concluding speech, Yu Jianhong, general manager of the group company, pointed out that safety runs through the development of the enterprise, and safety and environmental protection cannot be separated from production and operation. The two promote each other and complement each other, and managers at all levels must have a deep level of this.
2020
07-31
"Spike" Cement Becomes Yunnan Famous Brand Product
News from our newspaper At the beginning of the new year, good news came from Yunnan Jianfeng Cement Company. The "Jianfeng" brand cement successfully passed the examination and approval and won the title of "Yunnan Famous Brand Product. Since it was put into production in 2013, the "Jianfeng" brand cement produced by Yunnan Jianfeng has won good sales performance and reputation in the southwest Yunnan market, and its popularity and brand influence have been continuously improved. Therefore, Yunnan Jianfeng started to declare "famous brand products" in 2016. After preliminary data preparation, preliminary examination by Pu'er Municipal Bureau of Quality and Technical Supervision, expert review by Yunnan Provincial Bureau of Quality and Technical Supervision and on-site verification, Yunnan Provincial Bureau of Quality and Technical Supervision finally passed the examination and approval of "Yunnan Famous Brand Products" organized by Yunnan Provincial Strategic Leading Group for Implementing Brand and Strong Quality Province in 2017. The acquisition of this honorary title will further enhance the market competitiveness of Jianfeng Cement in southwestern Yunnan, and also increase the popularity of Yunnan Jianfeng, laying a more solid foundation for further market development in the future. (Li Chun)
2020
07-31