Huang Ping peak marketing staff manufacturing department learning work experience
Release time:
2022-04-06
Editor's Note: In order to strengthen the marketing staff's mastery of relevant business skills such as cement production enterprise process, cement theoretical knowledge, enterprise quality control, cement quality inspection process operation, etc., at the beginning of the New Year, Huang Ping Jianfeng Cement Company arranged marketing staff to practice in production positions in batches and stages to understand the cement production process. At present, some salesmen have completed the internship of the manufacturing department and summarized their internship work. This paper excerpts a part for everyone to share and learn.
Through 15 days of internship in different positions in the cement production line, I have a further understanding of the cement production process. At the same time, but also clearly aware of their lack of knowledge of cement.
to the manufacturing department on-site work and study, the first thing is safety education and training, which requires our employees to firmly establish the idea of safety first in their daily work, correctly handle the relationship between safety and production, and ensure the safe production of enterprises. In these 15 days, the place I stayed most was the kiln system, followed by the raw material system. We have to continuously inspect the entire production line every day to eliminate potential safety hazards in time. Wear masks and earplugs in places with a lot of dust and noise to reduce the impact of dust and noise on health. Every time the patrol inspection finds that there is a problem with the equipment or cleans up the smoke room and coal pipes, it is necessary to contact the central control through the interphone in the first place, and the central control can only start the operation after shutting down the equipment.
What I have to do every day in the kiln system is to check the flap valves in each layer of the preheater to prevent material accumulation, and then assist colleagues to clean up the clinker particles leaked from the smoke room, the coal pipe at the kiln head and the kiln head. During the operation, although I was assisting on the side, my colleagues still asked me to obey their instructions, wear a complete set of fire-proof clothing, and do a good job of safety protection to prevent safety accidents.
When studying the raw material system, my colleague introduced me to a small skill, which is to judge whether the raw material is qualified or not by the temperature of the V powder selector. Because the high and low temperature represents the high and low of the integrated moisture of the grinding material, the two are inversely proportional to the relationship. It can also be found that the chemical composition and content of the material will directly affect the kiln calcination operation and yield.
clinker is a hydraulic cementitious substance containing calcium oxide, silica, alumina and iron oxide, which is ground into fine powder and fired into partial melting state according to appropriate proportion, and calcium silicate is taken as the main mineral component. The mineral composition of clinker mainly includes tricalcium silicate, dicalcium silicate, tricalcium aluminate and tetralcium aluminate. The mineral with the largest content is tricalcium silicate, followed by dicalcium silicate. Cement clinker in the kiln system formation process, according to the temperature and reaction can be roughly divided into drying, preheating, firing and cooling. The six-stage preheater used by Huangping Peak can make better use of the waste heat of the waste gas discharged from the kiln and the decomposition furnace to heat the raw material, and the gas-solid dispersion is uniform, the heat exchange is rapid and the high energy separation is high, which improves the heat exchange efficiency between the gas and solid to a greater extent, and realizes the superiority, high yield and low consumption of the whole calcination system. The raw material enters the preheater from the raw material warehouse for preheating and decomposition, and then enters the kiln for calcination. After calcination, the clinker enters the fourth-generation grate cooler. Grate cooler is mainly to reduce the clinker temperature, and the role of the heat contained in the clinker for multiple use, while the heat in the form of secondary air, tertiary air return to the kiln, preheater and waste heat power generation system. Finally, the qualified clinker is transported to the clinker warehouse through the clinker inclined zipper.
After a short follow-up study, I not only buried the "seed " for safe production, but also got a preliminary understanding of the role of common raw materials in the cement production process. Only by laying a good foundation and communicating in the same industry, can we not get stage fright because we do not understand the use of equipment and the role of various raw materials, and have more communication with customers in the front line of the market. If I want to do a good job in cement business, I also need to be more proficient in cement knowledge and marketing knowledge, and dare to innovate, constantly improve my business skills, and be a qualified salesman. (Chen Jianfei)
At the production site, the most is the production equipment, and the most important thing to pay attention to is the mechanical injury. Before the equipment is turned on, the central control room will definitely notify the on-site inspection personnel to carry out detailed inspection on the site to confirm that no one can turn on the mechanical parts and belt conveyor on the site. There are large pieces of material and other abnormal conditions on site, which need to be dredged manually. The first thing to do is to notify the central control room to stop the equipment to prevent problems before they occur. When working, we should wear masks, protective clothing and earplugs for noisy equipment. When cleaning up the smoke room, there must be two or more people present, wearing fire-proof clothing, fire-proof caps and fire-proof covers, and there will be other on-site personnel to assist to ensure the safety of the operators.
During the two months of studying in the manufacturing department, I have a more comprehensive understanding of limestone mining, raw material crushing and pre-homogenization, raw material grinding, raw material homogenization, clinker calcination and cooling, cement powder, cement storage and homogenization, cement shipping and other processes. The site of the manufacturing department is roughly divided into five systems: raw meal, kiln, coal mill, cement mill and waste heat power generation. In addition to waste heat power generation, I have studied the inspection post of each system for a week, and have a better understanding of the production process and equipment of each system, as well as the matters needing attention in the usual inspection.
The two-month period is very short. Although it is a bit hard, in general, the harvest is far greater than the effort, and it also makes me realize many simple and simple truths. Every department and every post is indispensable, and no one can be careless, otherwise it will affect the work of the entire production line and the quality of the products. It also made me understand that only when production and sales cooperate with each other can enterprises produce and operate better. The study in the manufacturing department not only gave me a better understanding of the cement production process and cement professional knowledge, but also made me understand that in my new position, I must ask and learn more. Only by working with curiosity can I learn more knowledge. After that, I will continue to strengthen my study of cement production process and professional knowledge. Although I am a marketing position, it is difficult for me to establish a foothold in this industry without a solid foundation and a studious attitude.
(Yang Wentao)
The most important thing in the production workshop is to protect my own safety, so on the first day I entered the workshop to study, I first conducted level 3 safety education, training and examination. After entering the site, I started from the most basic job position, that is, the feeding position, which is mainly responsible for the normal feeding of raw materials and the inspection and dredging of clay belts and iron slag feeding ports. Most of my time is spent in clay feeding ports, iron powder weighing, clay belt heads and other places where materials are easy to accumulate. For me, who has never worked night shift, working all night has become the first big test. Every time after 2 in the morning, my eyes begin to strike. Neither drinking coffee nor washing my face can wake up my body. I remember one time when I was preparing to rest after cleaning the clay blanking port, I received a notice that the sandstone crusher was full of rubble. so at 2: 50 in the early morning, we started the cleaning work. because the construction space was relatively narrow, the dust all over the sky accompanied me for 2 hours of cleaning work, which was deeply imprinted in my memory. I was tired, hungry and sleepy, you can fall asleep almost anywhere.
In the first week of studying in the manufacturing department, I mainly experienced the work of the feeding post and learned the raw materials of the stacking shed. In the second week, I moved to the inspection post of the raw material system, mainly inspecting the normal operation of all equipment in the raw material system. When I followed the post worker to inspect together, he introduced the equipment and their operation principle to me in detail. In the third week, I went to the kiln system, which is the most critical part of cement production, and cleaned the crust in the smoke chamber and the accumulated material in the coal injection pipe at fixed points every day. In order to prevent injuries, protective measures need to be taken during work. After wearing fire-proof clothing and fire-proof cap, you can carry out high-pressure water gun skinning with the post worker. The daily inspection work is running in the preheater, which is as high as ,120 meters. Each floor swings the flap valve to prevent the flap valve from being stuck. At that time, I was also punished for not reporting to my superiors because the flap valve on the fourth floor was stuck. The fourth week is the last step into the cement production process - cement mill system study.
Through nearly two months of study in the manufacturing department, I have a better understanding of cement-related knowledge, but this is far from enough. If I want to be a qualified marketing personnel, I still need to enrich myself through continuous learning.
(Liu Chen Qian)
More information
Two Cement Enterprises Prosperous Production and Sales in May
With the gradual easing of the new crown epidemic, all over the project has started, Hubei, Yunnan two provinces cement market continued to improve, Daye peak cement company, Yunnan peak cement company two enterprises have recently shown a good momentum of production and sales. In May, the sales volume of Yunnan Jianfeng cement continued to rise. As of the time of publication, the average daily shipment volume reached more than 7400 tons, and the highest daily shipment volume reached more than 8700 tons, and the production capacity was fully released. Over the past few days, Yunnan Peak Packaging System has made great efforts to overcome the impact of narrow distribution sites and many cement varieties to ensure the completion of delivery tasks with good quality and quantity every day. In order to further balance production and sales and create conditions for the homogenization of cement delivered from the factory, Yunnan peak packaging system puts forward work requirements for relevant posts, emphasizes equipment inspection and process inspection during production, strictly implements safety operation procedures, and maintains safe and efficient operation of the system. Due to the impact of the new crown epidemic, Hubei cement market started late, Wuhan market is the hardest hit area, the current project construction is still not fully started, the volume pressure is greater. For this reason, daye peak departments cooperate closely, increase market development efforts, develop new mixing stations, focus on increasing the bulk share of Xianning, Huanggang and Wuhan markets, seize the opportunity of fine weather, and achieve the goal of rapid output. Internally, on the basis of equipment technical renovation and production capacity improvement, the delivery is effectively guaranteed, and the daily delivery capacity can basically be maintained at 10,000 tons. In May, Daye Peak sold more than 300000 tons of cement, an increase of 20% over the same period last year, with an average daily sales volume of more than 9900 tons, the highest in the current period since Daye Peak was put into production.
2020
07-31
The company's "safe production month" activities are about to start
June 2020 is the 19th national "safe production month", the theme of the activity is "eliminating hidden dangers of accidents and building a strong line of defense". A few days ago, the group company issued a notice to arrange the activities related to the organization of "safe production month" and put forward requirements. According to the group's "safe production month" activity plan, different key thematic activities will be held in the four weeks of June. The first week is the "Publicity and Safety Education Week", which focuses on the use of WeChat groups, electronic screens, publicity boards, banners, slogans and other forms for safety publicity, and organizes the study of national safety regulations, company safety system specifications and accident-free factory creation standards, Organize to watch safety warning education films, learn accident cases, etc., and improve employees' safety awareness by creating a safety atmosphere and organizing learning activities. The focus of the activities in the second week is "looking for potential sources of danger around you". Each unit takes departments and teams as units to investigate and analyze the potential risk factors in the process of daily production, maintenance and operation, find out the hazard sources that have not been included in the scope of risk point control, and report to the safety management department of the unit to form a risk assessment report, put forward solutions or suggestions, and supervise the implementation of rectification and timely eliminate potential safety hazards. The third week is the "on-site safety innovation achievements exhibition week", which focuses on the achievements of each unit in on-site safety management and on-site safety facilities in the past year, which are displayed in the form of pictures and texts through beautiful articles and wechat, so as to learn from each other and promote common progress. The fourth week is the "safety training and drill week", and the group company organizes the standardization of safety production and the elimination of hidden dangers.
2020
07-31
Jianfeng Pharmaceuticals ranks among the top 50 creative enterprises in Jinhua
News from our newspaper April 26 is World Intellectual Property Day. Jinhua City released the list of "Top 50 Creative Enterprises" for the first time. Jianfeng Pharmaceutical Company entered the list and ranked second among the enterprises in Jinhua Development Zone. The selection of creative enterprises, the enterprise holds the effective invention patent as the main indicator. Over the years, Jianfeng Pharmaceutical Co., Ltd. has taken "intellectual property rights help enterprise development, and scientific and technological innovation creates a century-old peak" as the company's intellectual property policy. It has actively cooperated with China Pharmaceutical University, Sichuan Institute of Antibiotic Industry, Zhejiang University of Technology, Xiamen University and other units to build a scientific research and innovation platform integrating production, learning and research, and flexibly introduced Academician Wang Guangji and Academician Shan Weiguang with the chief scientist system, according to the direction of enterprise development strategy to carry out scientific research work, and achieved fruitful results. In 2019, Spike Pharmaceuticals applied for 2 invention patents and obtained 5 patent authorizations, including 1 invention. By the end of 2019, Spike Pharmaceuticals had obtained a total of 37 patents (including 2 PCT patents), of which 28 were inventions. In recent years, in order to better integrate with the international market, Jianfeng Pharmaceutical has made a complete patent layout for the new drug DPT under development, and has applied for patent protection in multiple countries through the PCT application channel for core patents, and finally in the high-level United States. And Japan was authorized to lay a solid foundation for the product to enter these two overseas high-end markets. At the same time, around the core patent, applied for the preparation, crystal type patent and obtained the invention patent authorization 5. In addition, pharmaceutical companies have also developed patents for other varieties under research.
2020
07-31
Jianfeng Pharmaceuticals ranks among the top 50 creative enterprises in Jinhua
News from our newspaper April 26 is World Intellectual Property Day. Jinhua City released the list of "Top 50 Creative Enterprises" for the first time. Jianfeng Pharmaceutical Company entered the list and ranked second among the enterprises in Jinhua Development Zone. The selection of creative enterprises, the enterprise holds the effective invention patent as the main indicator. Over the years, Jianfeng Pharmaceutical Co., Ltd. has taken "intellectual property rights help enterprise development, and scientific and technological innovation creates a century-old peak" as the company's intellectual property policy. It has actively cooperated with China Pharmaceutical University, Sichuan Institute of Antibiotic Industry, Zhejiang University of Technology, Xiamen University and other units to build a scientific research and innovation platform integrating production, learning and research, and flexibly introduced Academician Wang Guangji and Academician Shan Weiguang with the chief scientist system, according to the direction of enterprise development strategy to carry out scientific research work, and achieved fruitful results. In 2019, Spike Pharmaceuticals applied for 2 invention patents and obtained 5 patent authorizations, including 1 invention. By the end of 2019, Spike Pharmaceuticals had obtained a total of 37 patents (including 2 PCT patents), of which 28 were inventions. In recent years, in order to better integrate with the international market, Jianfeng Pharmaceutical has made a complete patent layout for the new drug DPT under development, and has applied for patent protection in multiple countries through the PCT application channel for core patents, and finally in the high-level United States. And Japan was authorized to lay a solid foundation for the product to enter these two overseas high-end markets. At the same time, around the core patent, applied for the preparation, crystal type patent and obtained the invention patent authorization 5. In addition, pharmaceutical companies have also developed patents for other varieties under research.
2020
07-30
Jianfeng Pharmaceuticals ranks among the top 50 creative enterprises in Jinhua
News from our newspaper April 26 is World Intellectual Property Day. Jinhua City released the list of "Top 50 Creative Enterprises" for the first time. Jianfeng Pharmaceutical Company entered the list and ranked second among the enterprises in Jinhua Development Zone. The selection of creative enterprises, the enterprise holds the effective invention patent as the main indicator. Over the years, Jianfeng Pharmaceutical Co., Ltd. has taken "intellectual property rights help enterprise development, and scientific and technological innovation creates a century-old peak" as the company's intellectual property policy. It has actively cooperated with China Pharmaceutical University, Sichuan Institute of Antibiotic Industry, Zhejiang University of Technology, Xiamen University and other units to build a scientific research and innovation platform integrating production, learning and research, and flexibly introduced Academician Wang Guangji and Academician Shan Weiguang with the chief scientist system, according to the direction of enterprise development strategy to carry out scientific research work, and achieved fruitful results. In 2019, Spike Pharmaceuticals applied for 2 invention patents and obtained 5 patent authorizations, including 1 invention. By the end of 2019, Spike Pharmaceuticals had obtained a total of 37 patents (including 2 PCT patents), of which 28 were inventions. In recent years, in order to better integrate with the international market, Jianfeng Pharmaceutical has made a complete patent layout for the new drug DPT under development, and has applied for patent protection in multiple countries through the PCT application channel for core patents, and finally in the high-level United States. And Japan was authorized to lay a solid foundation for the product to enter these two overseas high-end markets. At the same time, around the core patent, applied for the preparation, crystal type patent and obtained the invention patent authorization 5. In addition, pharmaceutical companies have also developed patents for other varieties under research.
2020
07-22
On April 24, Jiang Xiaomeng, chairman of the group company, presided over the 14th meeting of the 10th board of directors of the company, and deliberated and passed 14 related reports and motions such as the 2019 annual board of directors report, the 2019 general manager business report and the 2019 annual report. The general manager's report pointed out that 2019 is the first year of the implementation of the group's new five-year strategic development plan (2019-2023) and the new three-year business plan (2019-2021) for each business sector. the management team has carried out various operation and management work in an orderly manner around the general policy of "innovation and reform, integration and promotion, scientific layout and steady development", and has better completed the business objectives set by the board of directors at the beginning of the year. In the whole year, the company achieved a total operating income of 3.548 billion billion yuan, an increase of 5.51 percent over the same period last year; net profit attributable to shareholders was 0.725 billion billion yuan, with earnings per share reaching 2.11 billion yuan, an increase of 23.14 percent over the same period last year, a record high; total assets at the end of the year were 5.475 billion billion yuan, an increase of 11.71 percent over the same period last year; and net assets attributable to shareholders were 3.789 billion billion yuan, an increase of 19.81 percent. During the reporting period, the company's two main businesses have achieved great development, benefiting from the further promotion of supply-side structural reform, the overall operation of the cement industry in 2019 is stable, and the industry benefits are further improved. During the reporting period, the company made new progress in the construction of cement projects, completed the acquisition, capital increase and name change of Guizhou Mingchuan (Guizhou Huangping Jianfeng Cement Co., Ltd.), and continued to invest in the construction of its new dry cement production line with a daily output of 4500 tons of clinker.
2020
07-31
Contact Us
No. 88 Wujiang East Road, Jinhua City, Zhejiang Province, China
Tel: +86-579-82326868
Fax : +86-579-82324666
©2023 Zhejiang Jianfeng Group Co., Ltd. Powered by: www.300.cn SEO Business License
SAF Coolest v1.2 设置面板 SHJSS-AHDB-FSSQE-ZSW
无数据提示
Sorry, the current column has no content !
You can view other columns or return to Home Page