News Center

Home page

Peak Report

News reports

Huang Ping peak marketing staff manufacturing department learning work experience

Release time:

2022-04-06

Editor's Note: In order to strengthen the marketing staff's mastery of relevant business skills such as cement production enterprise process, cement theoretical knowledge, enterprise quality control, cement quality inspection process operation, etc., at the beginning of the New Year, Huang Ping Jianfeng Cement Company arranged marketing staff to practice in production positions in batches and stages to understand the cement production process. At present, some salesmen have completed the internship of the manufacturing department and summarized their internship work. This paper excerpts a part for everyone to share and learn.

Through 15 days of internship in different positions in the cement production line, I have a further understanding of the cement production process. At the same time, but also clearly aware of their lack of knowledge of cement.

to the manufacturing department on-site work and study, the first thing is safety education and training, which requires our employees to firmly establish the idea of safety first in their daily work, correctly handle the relationship between safety and production, and ensure the safe production of enterprises. In these 15 days, the place I stayed most was the kiln system, followed by the raw material system. We have to continuously inspect the entire production line every day to eliminate potential safety hazards in time. Wear masks and earplugs in places with a lot of dust and noise to reduce the impact of dust and noise on health. Every time the patrol inspection finds that there is a problem with the equipment or cleans up the smoke room and coal pipes, it is necessary to contact the central control through the interphone in the first place, and the central control can only start the operation after shutting down the equipment.

What I have to do every day in the kiln system is to check the flap valves in each layer of the preheater to prevent material accumulation, and then assist colleagues to clean up the clinker particles leaked from the smoke room, the coal pipe at the kiln head and the kiln head. During the operation, although I was assisting on the side, my colleagues still asked me to obey their instructions, wear a complete set of fire-proof clothing, and do a good job of safety protection to prevent safety accidents.

When studying the raw material system, my colleague introduced me to a small skill, which is to judge whether the raw material is qualified or not by the temperature of the V powder selector. Because the high and low temperature represents the high and low of the integrated moisture of the grinding material, the two are inversely proportional to the relationship. It can also be found that the chemical composition and content of the material will directly affect the kiln calcination operation and yield.

clinker is a hydraulic cementitious substance containing calcium oxide, silica, alumina and iron oxide, which is ground into fine powder and fired into partial melting state according to appropriate proportion, and calcium silicate is taken as the main mineral component. The mineral composition of clinker mainly includes tricalcium silicate, dicalcium silicate, tricalcium aluminate and tetralcium aluminate. The mineral with the largest content is tricalcium silicate, followed by dicalcium silicate. Cement clinker in the kiln system formation process, according to the temperature and reaction can be roughly divided into drying, preheating, firing and cooling. The six-stage preheater used by Huangping Peak can make better use of the waste heat of the waste gas discharged from the kiln and the decomposition furnace to heat the raw material, and the gas-solid dispersion is uniform, the heat exchange is rapid and the high energy separation is high, which improves the heat exchange efficiency between the gas and solid to a greater extent, and realizes the superiority, high yield and low consumption of the whole calcination system. The raw material enters the preheater from the raw material warehouse for preheating and decomposition, and then enters the kiln for calcination. After calcination, the clinker enters the fourth-generation grate cooler. Grate cooler is mainly to reduce the clinker temperature, and the role of the heat contained in the clinker for multiple use, while the heat in the form of secondary air, tertiary air return to the kiln, preheater and waste heat power generation system. Finally, the qualified clinker is transported to the clinker warehouse through the clinker inclined zipper.

After a short follow-up study, I not only buried the "seed " for safe production, but also got a preliminary understanding of the role of common raw materials in the cement production process. Only by laying a good foundation and communicating in the same industry, can we not get stage fright because we do not understand the use of equipment and the role of various raw materials, and have more communication with customers in the front line of the market. If I want to do a good job in cement business, I also need to be more proficient in cement knowledge and marketing knowledge, and dare to innovate, constantly improve my business skills, and be a qualified salesman. (Chen Jianfei)

At the production site, the most is the production equipment, and the most important thing to pay attention to is the mechanical injury. Before the equipment is turned on, the central control room will definitely notify the on-site inspection personnel to carry out detailed inspection on the site to confirm that no one can turn on the mechanical parts and belt conveyor on the site. There are large pieces of material and other abnormal conditions on site, which need to be dredged manually. The first thing to do is to notify the central control room to stop the equipment to prevent problems before they occur. When working, we should wear masks, protective clothing and earplugs for noisy equipment. When cleaning up the smoke room, there must be two or more people present, wearing fire-proof clothing, fire-proof caps and fire-proof covers, and there will be other on-site personnel to assist to ensure the safety of the operators.

During the two months of studying in the manufacturing department, I have a more comprehensive understanding of limestone mining, raw material crushing and pre-homogenization, raw material grinding, raw material homogenization, clinker calcination and cooling, cement powder, cement storage and homogenization, cement shipping and other processes. The site of the manufacturing department is roughly divided into five systems: raw meal, kiln, coal mill, cement mill and waste heat power generation. In addition to waste heat power generation, I have studied the inspection post of each system for a week, and have a better understanding of the production process and equipment of each system, as well as the matters needing attention in the usual inspection.

The two-month period is very short. Although it is a bit hard, in general, the harvest is far greater than the effort, and it also makes me realize many simple and simple truths. Every department and every post is indispensable, and no one can be careless, otherwise it will affect the work of the entire production line and the quality of the products. It also made me understand that only when production and sales cooperate with each other can enterprises produce and operate better. The study in the manufacturing department not only gave me a better understanding of the cement production process and cement professional knowledge, but also made me understand that in my new position, I must ask and learn more. Only by working with curiosity can I learn more knowledge. After that, I will continue to strengthen my study of cement production process and professional knowledge. Although I am a marketing position, it is difficult for me to establish a foothold in this industry without a solid foundation and a studious attitude.

(Yang Wentao)

The most important thing in the production workshop is to protect my own safety, so on the first day I entered the workshop to study, I first conducted level 3 safety education, training and examination. After entering the site, I started from the most basic job position, that is, the feeding position, which is mainly responsible for the normal feeding of raw materials and the inspection and dredging of clay belts and iron slag feeding ports. Most of my time is spent in clay feeding ports, iron powder weighing, clay belt heads and other places where materials are easy to accumulate. For me, who has never worked night shift, working all night has become the first big test. Every time after 2 in the morning, my eyes begin to strike. Neither drinking coffee nor washing my face can wake up my body. I remember one time when I was preparing to rest after cleaning the clay blanking port, I received a notice that the sandstone crusher was full of rubble. so at 2: 50 in the early morning, we started the cleaning work. because the construction space was relatively narrow, the dust all over the sky accompanied me for 2 hours of cleaning work, which was deeply imprinted in my memory. I was tired, hungry and sleepy, you can fall asleep almost anywhere.

In the first week of studying in the manufacturing department, I mainly experienced the work of the feeding post and learned the raw materials of the stacking shed. In the second week, I moved to the inspection post of the raw material system, mainly inspecting the normal operation of all equipment in the raw material system. When I followed the post worker to inspect together, he introduced the equipment and their operation principle to me in detail. In the third week, I went to the kiln system, which is the most critical part of cement production, and cleaned the crust in the smoke chamber and the accumulated material in the coal injection pipe at fixed points every day. In order to prevent injuries, protective measures need to be taken during work. After wearing fire-proof clothing and fire-proof cap, you can carry out high-pressure water gun skinning with the post worker. The daily inspection work is running in the preheater, which is as high as ,120 meters. Each floor swings the flap valve to prevent the flap valve from being stuck. At that time, I was also punished for not reporting to my superiors because the flap valve on the fourth floor was stuck. The fourth week is the last step into the cement production process - cement mill system study.

Through nearly two months of study in the manufacturing department, I have a better understanding of cement-related knowledge, but this is far from enough. If I want to be a qualified marketing personnel, I still need to enrich myself through continuous learning.

(Liu Chen Qian)

More information

Jianfeng International Trade Selected as Pilot Enterprise of Non-car Carrier Logistics

In August, Jianfeng International Trading Company successfully passed the evaluation of traffic management departments and expert groups in Zhejiang Province and Jinhua City, and was successfully selected as a pilot enterprise of car-free carrier logistics in Zhejiang Province in 2019. "Car-free transportation" is a new format in the logistics industry brought about by the widespread application of information Internet technology. The "car-free carrier" signs a transportation contract with the shipper as a carrier, assumes the responsibilities and obligations of the carrier, and entrusts the actual carrier to complete the transportation task. Road freight operators. Compared with the traditional concept of logistics mode, car free carrier has the characteristics of strong resource integration ability, wide brand effect and obvious network effect. It is of great significance to promote the intensive integration of resources and the standardized development of the freight market by using Internet means and organizational mode innovation, which is of great significance to promote the transformation and upgrading of the logistics freight industry and improve the quality and efficiency. The planning and construction objectives of the "car-free carrier" platform envisaged by Jianfeng International Trade are: based on the influence of the peak region and the advantages of integrating qualification resources, changing the competition mode, expanding the market coverage and profit pattern, and realizing the transformation and upgrading of traditional businesses, I .e. realizing the "five" operations of PDCA closed-loop operation of supply chain system and marketing marketization, coordination of transportation capacity, customization of services, platform datalization and de-intermediation, we will continue to promote the regional logistics market from low, small, scattered and empty to resource sharing, value sharing and win-win cooperation, and finally build an integrated supply chain service system of "logistics Internet post-market finance. The relevant person in charge of the peak international trade said that the "car-free carrier" pilot qualification, for the peak international trade to change the business model, improve the quality of service.

2020

07-31

Peak International Trade Won Cotton Yarn Delivery Warehouse Qualification

On August 2, Zhengzhou Commodity Exchange issued "on the establishment of a new designated cotton yarn delivery warehouse and the announcement of the water", the peak international trading company officially obtained the Zheng Shang designated delivery warehouse qualification. According to the amendment to the cotton yarn futures business rules announced by Zheng Shang in March, the social warehouse delivery method will be introduced on the basis of retaining the original factory warehouse delivery, and will take the lead in implementing it in Shandong, Henan, Jiangsu and Zhejiang. As one of the eight new warehouse delivery units after the amendment is issued, Jianfeng International Trade can carry out cotton yarn futures delivery business from September 2019. Lanxi City, a subsidiary of Jinhua, is a "famous weaving city in China" and a national textile industry base. It has more than 1000 textile enterprises and an annual demand for cotton yarn of more than 1 million tons. After Jianfeng International Trade obtains the qualification for cotton yarn futures delivery, it can not only provide cotton yarn futures delivery sites for Lanxi cotton textile industry and upstream and downstream merchants, but also effectively serve Jinhua counties and cities, Xiaoshan, Shaoxing, Quzhou, Wenzhou and other places, and other provinces, and Fujian provinces. Since Jianfeng International Trade became a futures delivery warehouse in 2009, it has carried out four types of business of Dalian Commodity Exchange PVC, PE, PP and plywood. Cotton yarn delivery is the company's first business variety in Zhengzhou Commodity Exchange. At present, Jianfeng International Trade is actively organizing learning and training on cotton yarn business knowledge, actively expanding business channels, and understanding the actual needs of upstream and downstream industries to ensure the operation, service quality and delivery efficiency of this new business. (Huang Zhiyu)

2020

07-31

Peak International Trade Won Cotton Yarn Delivery Warehouse Qualification

2020

07-30

Peak International Trade Won Cotton Yarn Delivery Warehouse Qualification

2020

07-31

Peak International Trade Won Cotton Yarn Delivery Warehouse Qualification

2020

07-22

Peak Pharmaceuticals Ranked "Top 100 Chinese Drugs"

From July 15 to 18, the National Pharmacy Week and China Pharmaceutical Innovation and Development Conference was held in Jinan, Shandong Province. The conference released the "2018 China Pharmaceutical Industry Top 100 Series List". Zhejiang Jianfeng Pharmaceutical Co., Ltd. ranked 74th in the "TOP100 List of Chinese Pharmaceutical Enterprises. The "2018 Top 100 Series List of Chinese Pharmaceutical Industry" is divided into five sub-lists: "TOP100 List of Chinese Pharmaceutical Enterprises", "TOP100 List of Chinese Traditional Medicine Enterprises", "TOP20 List of Chinese CRO (including CDMO) Enterprises", "TOP20 List of Chinese Medical Devices (including IVD) Enterprises" and "TOP20 List of Chinese Biomedicine (including Blood Products, Vaccines, Insulin, etc.) Enterprises. The "chemical pharmaceutical enterprise" in the "TOP100 list of Chinese pharmaceutical enterprises" refers to the enterprises whose terminal sales of chemical drugs account for more than 51% of the total terminal income of the enterprises. The selection score consists of two parts, one is the innovation driving force of the enterprise, that is, the R & D comprehensive index score of R & D investment in 2018, accounting for 40% of the weight; The second is the professional promotion power of the enterprise, that is, the terminal quantitative data determined by the final selection needs of clinicians and patients in 2018, accounting for 60% of the weight; the objects participating in the selection are pharmaceutical industry enterprises registered in China (excluding subsidiaries of multinational pharmaceutical enterprises in China) and whose main business is pharmaceutical manufacturing. The convening of the conference and the release of the list have received widespread attention from the industry. Relevant leaders of the state and Shandong Province attended the meeting, chief scientist of Peak Pharmaceutical, Chinese Academy of Engineering

2020

07-31

< 1...29 30 31...61 > 跳转到页