News Center

Home page

Peak Report

News reports

Huang Ping peak marketing staff manufacturing department learning work experience

Release time:

2022-04-06

Editor's Note: In order to strengthen the marketing staff's mastery of relevant business skills such as cement production enterprise process, cement theoretical knowledge, enterprise quality control, cement quality inspection process operation, etc., at the beginning of the New Year, Huang Ping Jianfeng Cement Company arranged marketing staff to practice in production positions in batches and stages to understand the cement production process. At present, some salesmen have completed the internship of the manufacturing department and summarized their internship work. This paper excerpts a part for everyone to share and learn.

Through 15 days of internship in different positions in the cement production line, I have a further understanding of the cement production process. At the same time, but also clearly aware of their lack of knowledge of cement.

to the manufacturing department on-site work and study, the first thing is safety education and training, which requires our employees to firmly establish the idea of safety first in their daily work, correctly handle the relationship between safety and production, and ensure the safe production of enterprises. In these 15 days, the place I stayed most was the kiln system, followed by the raw material system. We have to continuously inspect the entire production line every day to eliminate potential safety hazards in time. Wear masks and earplugs in places with a lot of dust and noise to reduce the impact of dust and noise on health. Every time the patrol inspection finds that there is a problem with the equipment or cleans up the smoke room and coal pipes, it is necessary to contact the central control through the interphone in the first place, and the central control can only start the operation after shutting down the equipment.

What I have to do every day in the kiln system is to check the flap valves in each layer of the preheater to prevent material accumulation, and then assist colleagues to clean up the clinker particles leaked from the smoke room, the coal pipe at the kiln head and the kiln head. During the operation, although I was assisting on the side, my colleagues still asked me to obey their instructions, wear a complete set of fire-proof clothing, and do a good job of safety protection to prevent safety accidents.

When studying the raw material system, my colleague introduced me to a small skill, which is to judge whether the raw material is qualified or not by the temperature of the V powder selector. Because the high and low temperature represents the high and low of the integrated moisture of the grinding material, the two are inversely proportional to the relationship. It can also be found that the chemical composition and content of the material will directly affect the kiln calcination operation and yield.

clinker is a hydraulic cementitious substance containing calcium oxide, silica, alumina and iron oxide, which is ground into fine powder and fired into partial melting state according to appropriate proportion, and calcium silicate is taken as the main mineral component. The mineral composition of clinker mainly includes tricalcium silicate, dicalcium silicate, tricalcium aluminate and tetralcium aluminate. The mineral with the largest content is tricalcium silicate, followed by dicalcium silicate. Cement clinker in the kiln system formation process, according to the temperature and reaction can be roughly divided into drying, preheating, firing and cooling. The six-stage preheater used by Huangping Peak can make better use of the waste heat of the waste gas discharged from the kiln and the decomposition furnace to heat the raw material, and the gas-solid dispersion is uniform, the heat exchange is rapid and the high energy separation is high, which improves the heat exchange efficiency between the gas and solid to a greater extent, and realizes the superiority, high yield and low consumption of the whole calcination system. The raw material enters the preheater from the raw material warehouse for preheating and decomposition, and then enters the kiln for calcination. After calcination, the clinker enters the fourth-generation grate cooler. Grate cooler is mainly to reduce the clinker temperature, and the role of the heat contained in the clinker for multiple use, while the heat in the form of secondary air, tertiary air return to the kiln, preheater and waste heat power generation system. Finally, the qualified clinker is transported to the clinker warehouse through the clinker inclined zipper.

After a short follow-up study, I not only buried the "seed " for safe production, but also got a preliminary understanding of the role of common raw materials in the cement production process. Only by laying a good foundation and communicating in the same industry, can we not get stage fright because we do not understand the use of equipment and the role of various raw materials, and have more communication with customers in the front line of the market. If I want to do a good job in cement business, I also need to be more proficient in cement knowledge and marketing knowledge, and dare to innovate, constantly improve my business skills, and be a qualified salesman. (Chen Jianfei)

At the production site, the most is the production equipment, and the most important thing to pay attention to is the mechanical injury. Before the equipment is turned on, the central control room will definitely notify the on-site inspection personnel to carry out detailed inspection on the site to confirm that no one can turn on the mechanical parts and belt conveyor on the site. There are large pieces of material and other abnormal conditions on site, which need to be dredged manually. The first thing to do is to notify the central control room to stop the equipment to prevent problems before they occur. When working, we should wear masks, protective clothing and earplugs for noisy equipment. When cleaning up the smoke room, there must be two or more people present, wearing fire-proof clothing, fire-proof caps and fire-proof covers, and there will be other on-site personnel to assist to ensure the safety of the operators.

During the two months of studying in the manufacturing department, I have a more comprehensive understanding of limestone mining, raw material crushing and pre-homogenization, raw material grinding, raw material homogenization, clinker calcination and cooling, cement powder, cement storage and homogenization, cement shipping and other processes. The site of the manufacturing department is roughly divided into five systems: raw meal, kiln, coal mill, cement mill and waste heat power generation. In addition to waste heat power generation, I have studied the inspection post of each system for a week, and have a better understanding of the production process and equipment of each system, as well as the matters needing attention in the usual inspection.

The two-month period is very short. Although it is a bit hard, in general, the harvest is far greater than the effort, and it also makes me realize many simple and simple truths. Every department and every post is indispensable, and no one can be careless, otherwise it will affect the work of the entire production line and the quality of the products. It also made me understand that only when production and sales cooperate with each other can enterprises produce and operate better. The study in the manufacturing department not only gave me a better understanding of the cement production process and cement professional knowledge, but also made me understand that in my new position, I must ask and learn more. Only by working with curiosity can I learn more knowledge. After that, I will continue to strengthen my study of cement production process and professional knowledge. Although I am a marketing position, it is difficult for me to establish a foothold in this industry without a solid foundation and a studious attitude.

(Yang Wentao)

The most important thing in the production workshop is to protect my own safety, so on the first day I entered the workshop to study, I first conducted level 3 safety education, training and examination. After entering the site, I started from the most basic job position, that is, the feeding position, which is mainly responsible for the normal feeding of raw materials and the inspection and dredging of clay belts and iron slag feeding ports. Most of my time is spent in clay feeding ports, iron powder weighing, clay belt heads and other places where materials are easy to accumulate. For me, who has never worked night shift, working all night has become the first big test. Every time after 2 in the morning, my eyes begin to strike. Neither drinking coffee nor washing my face can wake up my body. I remember one time when I was preparing to rest after cleaning the clay blanking port, I received a notice that the sandstone crusher was full of rubble. so at 2: 50 in the early morning, we started the cleaning work. because the construction space was relatively narrow, the dust all over the sky accompanied me for 2 hours of cleaning work, which was deeply imprinted in my memory. I was tired, hungry and sleepy, you can fall asleep almost anywhere.

In the first week of studying in the manufacturing department, I mainly experienced the work of the feeding post and learned the raw materials of the stacking shed. In the second week, I moved to the inspection post of the raw material system, mainly inspecting the normal operation of all equipment in the raw material system. When I followed the post worker to inspect together, he introduced the equipment and their operation principle to me in detail. In the third week, I went to the kiln system, which is the most critical part of cement production, and cleaned the crust in the smoke chamber and the accumulated material in the coal injection pipe at fixed points every day. In order to prevent injuries, protective measures need to be taken during work. After wearing fire-proof clothing and fire-proof cap, you can carry out high-pressure water gun skinning with the post worker. The daily inspection work is running in the preheater, which is as high as ,120 meters. Each floor swings the flap valve to prevent the flap valve from being stuck. At that time, I was also punished for not reporting to my superiors because the flap valve on the fourth floor was stuck. The fourth week is the last step into the cement production process - cement mill system study.

Through nearly two months of study in the manufacturing department, I have a better understanding of cement-related knowledge, but this is far from enough. If I want to be a qualified marketing personnel, I still need to enrich myself through continuous learning.

(Liu Chen Qian)

More information

Spike New Drug Approved for Registration

On April 16, Jianfeng Pharmaceutical Company received the approval and issuance of Olopatadine Hydrochloride Eye Drops "Drug Registration Approval" (approval number: 2019S00296) approved by the State Drug Administration. Olopatadine hydrochloride eye drops is mainly used to treat the signs and symptoms of allergic conjunctivitis. It is a mast cell stabilizer and a relatively selective histamine H1-receptor antagonist. It can inhibit type I immediate allergic reactions in vivo and in vitro experiments. At present, the product has been included in the "National Basic Medical Insurance, Work Injury Insurance and Maternity Insurance Drug Catalog (2017 Edition)" and classified as Class B. According to the relevant data of IMS database, in 2018, the global sales of olopatadine hydrochloride eye drops were about 0.37 billion US dollars, and the sales in China were about 10.232 million US dollars. Spike Pharmaceuticals already has the corresponding production line, this time to obtain the registration approval, marking Spike Pharmaceuticals has the qualification to carry out the production and sales of olopatadine hydrochloride eye drops, will further enrich the product line of Spike Pharmaceuticals, help to enhance the competitiveness of the company's pharmaceutical business. (Xia Yingpin)

2020

07-22

Peak International Trade was rated as "excellent delivery warehouse" by the big business"

On April 12, the 2019 Dalian Commodity Exchange Industrial Products Delivery Work Summary Meeting was held in Dalian. Jianfeng International Trading Company was rated as "2018 (Industrial Products) Excellent Delivery Warehouse" and Ruan Weihang, an employee of the International Trading Company, was rated as "2018 (Industrial Products) Excellent Futures Specialist in Designated Delivery Warehouse". The delivery link is the bridge link between the futures and cash markets, an important area of risk prevention and control in the futures market, and a strong guarantee for the smooth operation and function of the market. Since obtaining the qualification of PVC delivery warehouse in 2009, the chemical warehousing and logistics business of international trading company has developed steadily. In terms of management, the international trading company strictly follows the various systems of the Dalian Commodity Exchange to implement warehouse-in and warehouse-in management. The management level has been improved year by year. Broken packages have been handled on the spot, and the loss of goods has been greatly reduced. The management goal of daily clearing has been achieved, and standardized operations have been achieved; in terms of business marketing, the futures business has driven the gradual development and growth of the spot business, futures varieties have developed from a single PVC variety to four varieties of PVC, PP, PE and plywood. The business volume has increased year by year and has exceeded 500000 tons. The operation volume can exceed 2500 tons/day; In terms of customer service, from zero experience in futures business to now, customer reputation has increased year by year, and customer complaints have gradually decreased. The annual excellent delivery warehouse of the judges is the full affirmation of Dalian Commodity Exchange on the functions of international trading companies, market satisfaction, futures management level and standardization of warehouse daily management. Lou Chunming, general manager of the international trading company, said that the international trading company will implement

2020

07-31

Spike New Drug Approved for Registration

2020

07-30

Peak Cement Won the Bid for National Key Project Daye Peak Becomes Huang-Huang Railway Supplier

On March 19, Daye Jianfeng Cement Company officially received a notice from China Railway Construction Material Collection Center that the company was shortlisted for the new Huang (Mei) Huang (Zhou) railway project in the Hubei section of the Shanghai-Chengdu high-speed railway along the Yangtze River in the second place, and obtained the right to supply the 6th package of cement. This is the first stick undertaken by Daye Jianfeng in 2019, and it is also the second time to enter the high-speed rail project after the Wu (Han) Jiu (Jiang) high-speed rail. The Huanghuang high-speed railway is a component of the "eight vertical and eight horizontal" high-speed railway network in the "National Medium and Long-term Railway Network Plan". It is a component of the Wuhan-Hangzhou and Beijing-Hong Kong-Kowloon high-speed railway network. It has a total length of 125 kilometers and a design speed of 350 kilometers per hour. It will start construction at the end of 2018. It will be opened to traffic in 2021. In addition to the characteristics of large demand for high-speed railway and highway projects, the project time span is long and the product quality requirements are high, especially the high-speed railway project has extremely strict requirements on the alkali content of cement. After participating in the bidding, Yuan Xianming, executive deputy general manager of Daye Peak, organized production, quality control, procurement and other relevant departments for many times to carry out tests on the production of low-alkali cement and adjust the proportion of raw materials. The quality control department also sent samples to the provincial professional inspection department for comparative inspection to ensure product stability. The marketing department carefully checked the details of the tender, strictly checked and repeatedly deduced the bid price. Finally, with the full cooperation of all departments, the successful bidding was passed, finalist Huang-Huang high-speed rail project. It is understood that as the country continues to increase investment in infrastructure transportation construction, daye peak adjusted its work direction at the end of 2018, requiring marketing work in 2019 to focus on key projects.

2020

07-31

Daye Peak Opens "Standard Year"

After the 2019 overhaul ended in early March, Daye Jianfeng Cement Company immediately launched the "Standard Year" activity to carry out standardized rectification in view of a series of defects and problems in the daily management process. The goal of the "Standard Year" activity is to target specific issues that affect employees' work efficiency and safe and environmentally friendly production. Through the formulation of institutionalized work standards, further standardize employees' various operations, improve operational efficiency, and improve grassroots management execution, so as to achieve The purpose of improving the company's image, reducing costs, improving efficiency, and increasing benefits. In order to ensure the smooth progress of the activities, daye peak has set up a promotion team headed by general manager Zhang fengliang to be responsible for the overall promotion of the "standard year" activities, mainly including revising the activity plan, summarizing the standardized implementation standards of various departments, implementing the plan, supervising the implementation progress, evaluating the implementation effect, collecting suggestions and opinions in the implementation process, etc. Based on the foundation, aiming at the details and solving problems is a major feature of Daye peak's "standard year" activity. For example, the "Flange Sealing Operation Standard", which is currently being tried out, not only puts forward standardization requirements for such a "trivial matter" in equipment management as flange sealing, but also attaches "model" photos to make it clear to mechanics What should be done and what should be done. However, this "small standard" aims at three problems: leakage at the production site, extensive mechanic work and waste of materials. Once it becomes the behavior habit of employees, the hygiene and cost control at the production site are bound to be improved. It is understood that Daye peak "standard year" activities plan to continue for three years to promote, activities

2020

07-22

Daye Peak Opens "Standard Year"

2020

07-31

< 1...31 32 33...61 > 跳转到页