Huang Ping peak marketing staff manufacturing department learning work experience
Release time:
2022-04-06
Editor's Note: In order to strengthen the marketing staff's mastery of relevant business skills such as cement production enterprise process, cement theoretical knowledge, enterprise quality control, cement quality inspection process operation, etc., at the beginning of the New Year, Huang Ping Jianfeng Cement Company arranged marketing staff to practice in production positions in batches and stages to understand the cement production process. At present, some salesmen have completed the internship of the manufacturing department and summarized their internship work. This paper excerpts a part for everyone to share and learn.
Through 15 days of internship in different positions in the cement production line, I have a further understanding of the cement production process. At the same time, but also clearly aware of their lack of knowledge of cement.
to the manufacturing department on-site work and study, the first thing is safety education and training, which requires our employees to firmly establish the idea of safety first in their daily work, correctly handle the relationship between safety and production, and ensure the safe production of enterprises. In these 15 days, the place I stayed most was the kiln system, followed by the raw material system. We have to continuously inspect the entire production line every day to eliminate potential safety hazards in time. Wear masks and earplugs in places with a lot of dust and noise to reduce the impact of dust and noise on health. Every time the patrol inspection finds that there is a problem with the equipment or cleans up the smoke room and coal pipes, it is necessary to contact the central control through the interphone in the first place, and the central control can only start the operation after shutting down the equipment.
What I have to do every day in the kiln system is to check the flap valves in each layer of the preheater to prevent material accumulation, and then assist colleagues to clean up the clinker particles leaked from the smoke room, the coal pipe at the kiln head and the kiln head. During the operation, although I was assisting on the side, my colleagues still asked me to obey their instructions, wear a complete set of fire-proof clothing, and do a good job of safety protection to prevent safety accidents.
When studying the raw material system, my colleague introduced me to a small skill, which is to judge whether the raw material is qualified or not by the temperature of the V powder selector. Because the high and low temperature represents the high and low of the integrated moisture of the grinding material, the two are inversely proportional to the relationship. It can also be found that the chemical composition and content of the material will directly affect the kiln calcination operation and yield.
clinker is a hydraulic cementitious substance containing calcium oxide, silica, alumina and iron oxide, which is ground into fine powder and fired into partial melting state according to appropriate proportion, and calcium silicate is taken as the main mineral component. The mineral composition of clinker mainly includes tricalcium silicate, dicalcium silicate, tricalcium aluminate and tetralcium aluminate. The mineral with the largest content is tricalcium silicate, followed by dicalcium silicate. Cement clinker in the kiln system formation process, according to the temperature and reaction can be roughly divided into drying, preheating, firing and cooling. The six-stage preheater used by Huangping Peak can make better use of the waste heat of the waste gas discharged from the kiln and the decomposition furnace to heat the raw material, and the gas-solid dispersion is uniform, the heat exchange is rapid and the high energy separation is high, which improves the heat exchange efficiency between the gas and solid to a greater extent, and realizes the superiority, high yield and low consumption of the whole calcination system. The raw material enters the preheater from the raw material warehouse for preheating and decomposition, and then enters the kiln for calcination. After calcination, the clinker enters the fourth-generation grate cooler. Grate cooler is mainly to reduce the clinker temperature, and the role of the heat contained in the clinker for multiple use, while the heat in the form of secondary air, tertiary air return to the kiln, preheater and waste heat power generation system. Finally, the qualified clinker is transported to the clinker warehouse through the clinker inclined zipper.
After a short follow-up study, I not only buried the "seed " for safe production, but also got a preliminary understanding of the role of common raw materials in the cement production process. Only by laying a good foundation and communicating in the same industry, can we not get stage fright because we do not understand the use of equipment and the role of various raw materials, and have more communication with customers in the front line of the market. If I want to do a good job in cement business, I also need to be more proficient in cement knowledge and marketing knowledge, and dare to innovate, constantly improve my business skills, and be a qualified salesman. (Chen Jianfei)
At the production site, the most is the production equipment, and the most important thing to pay attention to is the mechanical injury. Before the equipment is turned on, the central control room will definitely notify the on-site inspection personnel to carry out detailed inspection on the site to confirm that no one can turn on the mechanical parts and belt conveyor on the site. There are large pieces of material and other abnormal conditions on site, which need to be dredged manually. The first thing to do is to notify the central control room to stop the equipment to prevent problems before they occur. When working, we should wear masks, protective clothing and earplugs for noisy equipment. When cleaning up the smoke room, there must be two or more people present, wearing fire-proof clothing, fire-proof caps and fire-proof covers, and there will be other on-site personnel to assist to ensure the safety of the operators.
During the two months of studying in the manufacturing department, I have a more comprehensive understanding of limestone mining, raw material crushing and pre-homogenization, raw material grinding, raw material homogenization, clinker calcination and cooling, cement powder, cement storage and homogenization, cement shipping and other processes. The site of the manufacturing department is roughly divided into five systems: raw meal, kiln, coal mill, cement mill and waste heat power generation. In addition to waste heat power generation, I have studied the inspection post of each system for a week, and have a better understanding of the production process and equipment of each system, as well as the matters needing attention in the usual inspection.
The two-month period is very short. Although it is a bit hard, in general, the harvest is far greater than the effort, and it also makes me realize many simple and simple truths. Every department and every post is indispensable, and no one can be careless, otherwise it will affect the work of the entire production line and the quality of the products. It also made me understand that only when production and sales cooperate with each other can enterprises produce and operate better. The study in the manufacturing department not only gave me a better understanding of the cement production process and cement professional knowledge, but also made me understand that in my new position, I must ask and learn more. Only by working with curiosity can I learn more knowledge. After that, I will continue to strengthen my study of cement production process and professional knowledge. Although I am a marketing position, it is difficult for me to establish a foothold in this industry without a solid foundation and a studious attitude.
(Yang Wentao)
The most important thing in the production workshop is to protect my own safety, so on the first day I entered the workshop to study, I first conducted level 3 safety education, training and examination. After entering the site, I started from the most basic job position, that is, the feeding position, which is mainly responsible for the normal feeding of raw materials and the inspection and dredging of clay belts and iron slag feeding ports. Most of my time is spent in clay feeding ports, iron powder weighing, clay belt heads and other places where materials are easy to accumulate. For me, who has never worked night shift, working all night has become the first big test. Every time after 2 in the morning, my eyes begin to strike. Neither drinking coffee nor washing my face can wake up my body. I remember one time when I was preparing to rest after cleaning the clay blanking port, I received a notice that the sandstone crusher was full of rubble. so at 2: 50 in the early morning, we started the cleaning work. because the construction space was relatively narrow, the dust all over the sky accompanied me for 2 hours of cleaning work, which was deeply imprinted in my memory. I was tired, hungry and sleepy, you can fall asleep almost anywhere.
In the first week of studying in the manufacturing department, I mainly experienced the work of the feeding post and learned the raw materials of the stacking shed. In the second week, I moved to the inspection post of the raw material system, mainly inspecting the normal operation of all equipment in the raw material system. When I followed the post worker to inspect together, he introduced the equipment and their operation principle to me in detail. In the third week, I went to the kiln system, which is the most critical part of cement production, and cleaned the crust in the smoke chamber and the accumulated material in the coal injection pipe at fixed points every day. In order to prevent injuries, protective measures need to be taken during work. After wearing fire-proof clothing and fire-proof cap, you can carry out high-pressure water gun skinning with the post worker. The daily inspection work is running in the preheater, which is as high as ,120 meters. Each floor swings the flap valve to prevent the flap valve from being stuck. At that time, I was also punished for not reporting to my superiors because the flap valve on the fourth floor was stuck. The fourth week is the last step into the cement production process - cement mill system study.
Through nearly two months of study in the manufacturing department, I have a better understanding of cement-related knowledge, but this is far from enough. If I want to be a qualified marketing personnel, I still need to enrich myself through continuous learning.
(Liu Chen Qian)
More information
Spike Health was identified as Zhejiang Agricultural Science and Technology R & D Center
Zhejiang Provincial Department of science and technology recently issued a notice, peak health technology company research and development center was identified as Zhejiang agricultural science and technology research and development center. According to the relevant requirements, Zhejiang agricultural science and technology research and development center must be established with national and provincial agricultural leading enterprises, agricultural science and technology enterprises or other scientific and technological agricultural enterprises with high scientific and technological content as the carrier, with strong economic strength and scientific and technological research and development foundation; The annual sales income of the enterprise is more than 10 million yuan, and the R & D center has more than 10 full-time technicians, of whom more than 30% have bachelor's degree or above; the annual technology development funds shall not be less than 3% of the sales revenue of the enterprise; it has the necessary instruments and equipment and fixed and special places to meet the research and development; it has the conditions for the application of agricultural technology information network. The main business of the enterprise is clear, and it is the priority industry in our province. The technological innovation achievements have a wide range of radiation, the enterprise system is sound, and the operating mechanism is good. With the domestic, provincial institutions of higher learning, scientific research units have established a stable relationship of scientific research cooperation. Since its establishment, Jianfeng Health has attached great importance to the construction of innovation platform and the cultivation of scientific and technological talents. In 2016, it has been recognized as Jinhua agricultural science and technology enterprise and municipal agricultural science and technology research and development center. In 2017, research and development investment accounted for 5.06 of sales revenue, and full-time research and development personnel with bachelor's degree or above accounted for 80.9, consisting of talents including traditional Chinese medicine, traditional Chinese medicine preparation, agriculture and biotechnology, pharmacy, analysis, plant extraction, food engineering, etc. Dr. Li Wende, head of the research and development center, was also selected "Jinhua Shuanglong plan talent" in 2017 ". In recent years, peak health and Zhejiang workers.
2020
07-31
Chairman Jiang Xiaomeng Directs Work in Yunnan Peak
On December 16, Jiang Xiaomeng, Secretary of the Party committee and chairman of the group company, went to Yunnan Jianfeng cement company to investigate and guide the work. On the morning of the same day, accompanied by the Yunnan peak management team, Jiang Xiaomeng went deep into the front line and successively went to the central control room of the production and manufacturing department, the raw material clay yard, the lignite yard and other areas for field investigation and investigation to understand the problems existing in the production and operation process. Subsequently, a business analysis meeting was held to make a comparative analysis of the various business indicators of Yunnan Jianfeng from January to November this year, and put forward two requirements to the management team: further strengthen internal management and improve execution; strengthen the coordination of external relations, and improve The ability and level of enterprise resource acquisition. At the Yunnan Jianfeng middle-level cadre meeting held on the afternoon of the 16th, Jiang Xiaomeng first fully affirmed Yunnan Jianfeng's highest output and best benefits since it was put into production in 2018, and expressed his gratitude to all cadres and employees of Yunnan Jianfeng for their hard work. After that, Jiang Xiaomeng made a detailed analysis of the cement industry and the regional market environment in Yunnan, and combined with the current production and operation situation of Yunnan Jianfeng, put forward the focus of the next step: 1. should fully attach importance to and mobilize the initiative and responsibility of employees at all levels to improve the overall execution of the team; 2. raw material mines are an important factor restricting the future development of cement enterprises, which should be paid full attention to and formulate clear strategies and methods, set out a timetable to obtain future production resources as much as possible; 3. continuously advocate and promote technological innovation, keep pace with the times, continuously improve production management, equipment management, production technology level, and maintain the competitive advantage of the industry; 4. further strengthen production
2020
07-31
Chairman Jiang Xiaomeng Directs Work in Yunnan Peak
On December 16, Jiang Xiaomeng, Secretary of the Party committee and chairman of the group company, went to Yunnan Jianfeng cement company to investigate and guide the work. On the morning of the same day, accompanied by the Yunnan peak management team, Jiang Xiaomeng went deep into the front line and successively went to the central control room of the production and manufacturing department, the raw material clay yard, the lignite yard and other areas for field investigation and investigation to understand the problems existing in the production and operation process. Subsequently, a business analysis meeting was held to make a comparative analysis of the various business indicators of Yunnan Jianfeng from January to November this year, and put forward two requirements to the management team: further strengthen internal management and improve execution; strengthen the coordination of external relations, and improve The ability and level of enterprise resource acquisition. At the Yunnan Jianfeng middle-level cadre meeting held on the afternoon of the 16th, Jiang Xiaomeng first fully affirmed Yunnan Jianfeng's highest output and best benefits since it was put into production in 2018, and expressed his gratitude to all cadres and employees of Yunnan Jianfeng for their hard work. After that, Jiang Xiaomeng made a detailed analysis of the cement industry and the regional market environment in Yunnan, and combined with the current production and operation situation of Yunnan Jianfeng, put forward the focus of the next step: 1. should fully attach importance to and mobilize the initiative and responsibility of employees at all levels to improve the overall execution of the team; 2. raw material mines are an important factor restricting the future development of cement enterprises, which should be paid full attention to and formulate clear strategies and methods, set out a timetable to obtain future production resources as much as possible; 3. continuously advocate and promote technological innovation, keep pace with the times, continuously improve production management, equipment management, production technology level, and maintain the competitive advantage of the industry; 4. further strengthen production
2020
07-30
Editor's note: On November 20, the first page of "Jinhua Daily" published "Focus on sticking to the peak forever-Enlightenment of Jianfeng Group's 60 years of entrepreneurship" written by the reporter of the newspaper, which was specially reprinted by this newspaper. Focus on sticking to the peak forever-Jianfeng Group's 60 years of entrepreneurship enlightenment "Jinhua Daily" reporter Shao Xuilian as of the end of the third quarter of this year, the total assets of 4.788 billion yuan, net assets of 3.366 billion yuan, the realization of the parent company's net profit of 0.488 billion yuan, earnings per share of 1.42 yuan. Recently, Jianfeng Group disclosed its beautiful report for the third quarter of 2018, celebrating its 60th anniversary with the best operating results in history. Wind and rain for 60 years. With sustained and steady high-quality development, the peak people are moving towards a comprehensive modern enterprise group with strong core competitiveness. Strategy: Focus and Professionalism In 1958, the first generation of peak people built the first cement factory in Jinhua history at the foot of peak mountain. Beginning in 1983, through horizontal alliances with township enterprises, the formation of enterprise groups, and the implementation of shareholding reforms, Jianfeng has developed from a small state-owned cement plant to the first listed company in China's cement industry. Since then, in the stage of diversification, the peak will develop the pharmaceutical industry into the second pillar industry. In 2007, it joined forces with the central enterprise China Building Materials to participate in the establishment of Southern Cement and strategically shifted the focus of the cement industry; at the same time, through corporate mergers and acquisitions and technological innovation, the pharmaceutical industry has further exerted its strength. Today, Jianfeng Group has 33 participating and holding subsidiaries, involving building materials, medicine, big health, modern logistics, national.
2020
07-31
News from our newspaper On the occasion of the celebration of the 60th anniversary of Jianfeng's entrepreneurship, the selection results of the two competitions of "Me and Jianfeng" essay and employee calligraphy and painting photography exhibition are also fresh. Since July 2017, more than 50 contributions have been received from employees and their families. According to the overall situation of the content and writing level of the solicitation, 3 first prize works, 5 second prize works and 7 third prize works were selected. The staff calligraphy and painting photography exhibition began to call for contributions in early April. in just five months, it received more than 100 works from dozens of authors from various enterprises under the group, and successfully held the exhibition from October 10 to 17, which was welcomed and praised by the majority of employees. After a comprehensive selection of employee contributions, a total of 3 first-class works, 5 second-class works, and 7 third-class works were selected. In order to ensure the fairness and impartiality of the selection, the works of the leading group, working group members and specially invited works to commemorate the 60th anniversary of Jianfeng Entrepreneurship will not participate in the selection of the grade award. (The list of winners is attached) (This reporter) "I and the peak" essay list first prize "mother and son deep love" author: Daye peak Shi Fu "I have a date with the peak" author: Yunnan peak Luo Meiyan "buying a house" author: peak cable Lu Chaofang second prize "ten years, sixty years" author: pharmaceutical sales company Xu Yuting "my peak road" author: daye Peak Yang Zhendong's "My Teacher" Author: Fan Tufa, Municipal Pharmaceutical Company, "Peak Grows with Me for 20 Years" Author: Xu Junxiong, Pharmaceutical Sales Company, "Peak Grows with Me"
2020
07-31
Contact Us
No. 88 Wujiang East Road, Jinhua City, Zhejiang Province, China
Tel: +86-579-82326868
Fax : +86-579-82324666
©2023 Zhejiang Jianfeng Group Co., Ltd. Powered by: www.300.cn SEO Business License
SAF Coolest v1.2 设置面板 SHJSS-AHDB-FSSQE-ZSW
无数据提示
Sorry, the current column has no content !
You can view other columns or return to Home Page