Daye Peak Completed Two Equipment Reformation
Release time:
2022-04-06
News Recently, Daye Jianfeng Cement Company has reformed the loading belt structure of two packaging lines and the tail wheels of three reverse hoists for cement transportation.
Daye peak packaging system two packaging lines, due to the packaging machine is affected by external factors such as compressed air pressure, bag insertion position, cement specific gravity, paper bag size, etc., there will be different degrees of "flat bag " or horizontal bag, these cement bags pass through the unloading charter machine, bag cleaning machine, parallel belt bell mouth, chute, drum and other positions, if the whole package is not carried out in time, the package will be blocked. Cleaning the blocked package not only poses security risks, but also increases the workload of employees and causes waste of machinery and materials. In order to avoid the occurrence of bag blocking, special personnel should be assigned to carry out the whole bag work, so as to ensure that the cement bag can pass through each "gate " smoothly and the delivery is normal. The transformation of the packaging line structure has improved the guarantee coefficient of the normal operation of the packaging system, reduced the workload and safety risks of on-site employees, and also provided hardware guarantee for the optimization of packaging system personnel. The original plan to install the belt protection net was creatively replaced with the existing sealing shed, saving more than 10,000 yuan in production cost. Before the modification of the tail wheel of the
Daye peak cement warehouse reversing hoist, the pressure bar type counterweight box is mainly used to counterweight the top end of the tail of the warehouse reversing hoist. When the roller moves up and down, the counterweight box will also move, resulting in material leakage and dust generation due to lax sealing on the hoist side. Due to the generation of dust, the hoist bearing has been operating under high dust and high temperature for a long time, and the bearing seal is easy to wear, resulting in greatly shortening the service life of the bearing and increasing the consumption of machine materials. The bearing is built-in and difficult to find in time after damage. Moreover, however, the shutdown inspection affects the delivery efficiency.
After the transformation, the hoist adopts a fully sealed labyrinth dust-proof structure, the bottom bearing of the tail wheel is external, and the ejector rod is used to adjust the belt tension to reduce and avoid the movement of the counterweight box. Through technical renovation, the working environment at the bottom of the cement warehouse can be improved, the production dust can be avoided, the health of employees can be protected, the cleaning time of employees can be reduced, the efficiency of equipment maintenance can be improved, the service life of bearings can be prolonged, and the smooth delivery of cement can be ensured. Effectively solve the situation of leakage and ash of the tail wheel of the cement warehouse hoist and belt damage caused by belt deviation.
(Huang Bide Chen Cuihong)
More information
Tianjin Flemish Company Donates Anti-epidemic Materials
On the morning of July 13, Tianjin Jianfeng Flanders Pharmaceutical Technology Development Co., Ltd. donated materials to the Tianjin Development Zone Charity Association to help the development zone community fight the epidemic.
2020
08-05
In late July, leaders of the group company Jiang Xiaomeng, Yu Jianhong, Chen Tianci and Qin Xuping visited subordinate enterprises separately and sent heatstroke prevention and cooling supplies to employees working under high temperature, urging everyone to pay attention to heatstroke prevention and cooling and safe production work to ensure good physical condition.
2020
08-05
On July 17 and 18, the Group's work analysis meeting for the first half of 2020 was held at the Peak Building of the Group's headquarters to summarize and review the work in the first half of the year and make arrangements for the work in the second half of the year.
2020
08-05
The company requires to do a good job in summer safety production
The high temperature season is approaching, and the group company issued a notice a few days ago to make arrangements for safe production in summer.
2020
08-05
The company requires to do a good job in summer safety production
The high temperature season is approaching, and the group company issued a notice a few days ago to make arrangements for safe production in summer. The notice requires all subordinate units of the company to attach great importance to the work of production safety in summer, and all production and business units should hold a special meeting on production safety in summer. According to the characteristics of production in summer, they should focus on safety risk analysis for mines, outdoor operations and high-temperature posts, and implement control measures to avoid the occurrence of safety accidents such as scalding, heatstroke and electric shock. In order to further strengthen the safety production management in the high temperature season, the notice requires the main person in charge of each production and business unit to lead a team to conduct a comprehensive inspection of the production and business premises according to the characteristics of summer production; strengthen the daily safety production inspection of key posts and special posts; timely rectify the found unsafe behaviors and hidden dangers; Strengthen the management of the storage and use of flammable, explosive, dangerous chemicals and drugs; cooling measures shall be taken for the space exceeding the storage temperature limit of articles. If it is found that the electrical equipment circuit and exhaust fan circuit are aged and damaged, replace them in time and keep the grounding wire in good condition. Do a good job in checking the fire pool, pipeline water pressure and fire extinguishing equipment to ensure that the fire fighting facilities are sensitive, intact and reliable. The high temperature in summer is also a period of frequent occurrence of heatstroke and other diseases. The notice requires all units to do a good job in heatstroke prevention and cooling, implement various relevant measures, and equip necessary cooling facilities or materials such as fans, air conditioners, ice cubes and other cooling facilities or materials according to the conditions of the production site; do a good job in the distribution of heatstroke prevention drugs, supplies and cool drinks in workshops, warehouses, construction sites and other production lines; strengthen canteen management to prevent food poisoning. (this newspaper reporter)
2020
07-22
The company requires to do a good job in summer safety production
The high temperature season is approaching, and the group company issued a notice a few days ago to make arrangements for safe production in summer. The notice requires all subordinate units of the company to attach great importance to the work of production safety in summer, and all production and business units should hold a special meeting on production safety in summer. According to the characteristics of production in summer, they should focus on safety risk analysis for mines, outdoor operations and high-temperature posts, and implement control measures to avoid the occurrence of safety accidents such as scalding, heatstroke and electric shock. In order to further strengthen the safety production management in the high temperature season, the notice requires the main person in charge of each production and business unit to lead a team to conduct a comprehensive inspection of the production and business premises according to the characteristics of summer production; strengthen the daily safety production inspection of key posts and special posts; timely rectify the found unsafe behaviors and hidden dangers; Strengthen the management of the storage and use of flammable, explosive, dangerous chemicals and drugs; cooling measures shall be taken for the space exceeding the storage temperature limit of articles. If it is found that the electrical equipment circuit and exhaust fan circuit are aged and damaged, replace them in time and keep the grounding wire in good condition. Do a good job in checking the fire pool, pipeline water pressure and fire extinguishing equipment to ensure that the fire fighting facilities are sensitive, intact and reliable. The high temperature in summer is also a period of frequent occurrence of heatstroke and other diseases. The notice requires all units to do a good job in heatstroke prevention and cooling, implement various relevant measures, and equip necessary cooling facilities or materials such as fans, air conditioners, ice cubes and other cooling facilities or materials according to the conditions of the production site; do a good job in the distribution of heatstroke prevention drugs, supplies and cool drinks in workshops, warehouses, construction sites and other production lines; strengthen canteen management to prevent food poisoning. (this newspaper reporter)
2020
07-31
Contact Us
No. 88 Wujiang East Road, Jinhua City, Zhejiang Province, China
Tel: +86-579-82326868
Fax : +86-579-82324666
©2023 Zhejiang Jianfeng Group Co., Ltd. Powered by: www.300.cn SEO Business License
SAF Coolest v1.2 设置面板 SHJSS-AHDB-FSSQE-ZSW
无数据提示
Sorry, the current column has no content !
You can view other columns or return to Home Page