Daye Peak Completed Two Equipment Reformation
Release time:
2022-04-06
News Recently, Daye Jianfeng Cement Company has reformed the loading belt structure of two packaging lines and the tail wheels of three reverse hoists for cement transportation.
Daye peak packaging system two packaging lines, due to the packaging machine is affected by external factors such as compressed air pressure, bag insertion position, cement specific gravity, paper bag size, etc., there will be different degrees of "flat bag " or horizontal bag, these cement bags pass through the unloading charter machine, bag cleaning machine, parallel belt bell mouth, chute, drum and other positions, if the whole package is not carried out in time, the package will be blocked. Cleaning the blocked package not only poses security risks, but also increases the workload of employees and causes waste of machinery and materials. In order to avoid the occurrence of bag blocking, special personnel should be assigned to carry out the whole bag work, so as to ensure that the cement bag can pass through each "gate " smoothly and the delivery is normal. The transformation of the packaging line structure has improved the guarantee coefficient of the normal operation of the packaging system, reduced the workload and safety risks of on-site employees, and also provided hardware guarantee for the optimization of packaging system personnel. The original plan to install the belt protection net was creatively replaced with the existing sealing shed, saving more than 10,000 yuan in production cost. Before the modification of the tail wheel of the
Daye peak cement warehouse reversing hoist, the pressure bar type counterweight box is mainly used to counterweight the top end of the tail of the warehouse reversing hoist. When the roller moves up and down, the counterweight box will also move, resulting in material leakage and dust generation due to lax sealing on the hoist side. Due to the generation of dust, the hoist bearing has been operating under high dust and high temperature for a long time, and the bearing seal is easy to wear, resulting in greatly shortening the service life of the bearing and increasing the consumption of machine materials. The bearing is built-in and difficult to find in time after damage. Moreover, however, the shutdown inspection affects the delivery efficiency.
After the transformation, the hoist adopts a fully sealed labyrinth dust-proof structure, the bottom bearing of the tail wheel is external, and the ejector rod is used to adjust the belt tension to reduce and avoid the movement of the counterweight box. Through technical renovation, the working environment at the bottom of the cement warehouse can be improved, the production dust can be avoided, the health of employees can be protected, the cleaning time of employees can be reduced, the efficiency of equipment maintenance can be improved, the service life of bearings can be prolonged, and the smooth delivery of cement can be ensured. Effectively solve the situation of leakage and ash of the tail wheel of the cement warehouse hoist and belt damage caused by belt deviation.
(Huang Bide Chen Cuihong)
More information
Publicity of Environmental Protection Acceptance for Completion of Kiln End Flue Gas Desulfurization Project of daye peak cement co., ltd. According to the requirements of the Interim Measures for Environmental Protection Acceptance for Completion of Construction Projects (No.4 [2017] of the State Environmental Regulations) issued by the Ministry of Environmental Protection, the environmental protection acceptance information of "Kiln End Flue Gas Desulfurization Project" of daye peak cement co., ltd. is now publicized. Basic Information of 1. Project Project Name: Kiln End Flue Gas Desulfurization Project Construction Unit: daye Jianfeng Cement Co., Ltd. Project Construction Location: Yongguang Village, Baoan Town, daye city, nature of the project in the existing plant area of daye Jianfeng Cement Co., Ltd.: The construction content of the technological transformation project is: This technological transformation project is mainly to build a wet desulfurization system for kiln end gas of the company's existing 4000t cement clinker production line, adopting limestone-gypsum wet flue gas desulfurization process. The project covers a total area of 500 m2, with a new construction area of about 450 m2. It mainly builds desulfurization complex building, flue gas system, SO2 absorption system, limestone powder conveying and limestone slurry preparation system, process water system, gypsum dehydration system and supporting pipelines. Power supply, water supply, compressed air and other public works rely on the existing plant. Total investment and environmental protection investment: the total investment of the project is 10.37 million yuan, all of which are environmental protection investment. The project was entrusted to Huangshi Yangtze River Environmental Engineering Design and Research Institute to carry out environmental impact assessment in September 2017. On November 16, 2017, Daye Municipal Environmental Protection Bureau issued a reply with YEHAN [2017] No. 354. Implementation of 2. environmental protection measures The scope of this acceptance is the flue gas desulfurization system and supporting facilities at the end of the kiln. (1) Exhaust gas pollution
2020
07-31
Spike New Drug Approved for Registration
On April 16, Jianfeng Pharmaceutical Company received the approval and issuance of Olopatadine Hydrochloride Eye Drops "Drug Registration Approval" (approval number: 2019S00296) approved by the State Drug Administration. Olopatadine hydrochloride eye drops is mainly used to treat the signs and symptoms of allergic conjunctivitis. It is a mast cell stabilizer and a relatively selective histamine H1-receptor antagonist. It can inhibit type I immediate allergic reactions in vivo and in vitro experiments. At present, the product has been included in the "National Basic Medical Insurance, Work Injury Insurance and Maternity Insurance Drug Catalog (2017 Edition)" and classified as Class B. According to the relevant data of IMS database, in 2018, the global sales of olopatadine hydrochloride eye drops were about 0.37 billion US dollars, and the sales in China were about 10.232 million US dollars. Spike Pharmaceuticals already has the corresponding production line, this time to obtain the registration approval, marking Spike Pharmaceuticals has the qualification to carry out the production and sales of olopatadine hydrochloride eye drops, will further enrich the product line of Spike Pharmaceuticals, help to enhance the competitiveness of the company's pharmaceutical business. (Xia Yingpin)
2020
07-31
Spike New Drug Approved for Registration
On April 16, Jianfeng Pharmaceutical Company received the approval and issuance of Olopatadine Hydrochloride Eye Drops "Drug Registration Approval" (approval number: 2019S00296) approved by the State Drug Administration. Olopatadine hydrochloride eye drops is mainly used to treat the signs and symptoms of allergic conjunctivitis. It is a mast cell stabilizer and a relatively selective histamine H1-receptor antagonist. It can inhibit type I immediate allergic reactions in vivo and in vitro experiments. At present, the product has been included in the "National Basic Medical Insurance, Work Injury Insurance and Maternity Insurance Drug Catalog (2017 Edition)" and classified as Class B. According to the relevant data of IMS database, in 2018, the global sales of olopatadine hydrochloride eye drops were about 0.37 billion US dollars, and the sales in China were about 10.232 million US dollars. Spike Pharmaceuticals already has the corresponding production line, this time to obtain the registration approval, marking Spike Pharmaceuticals has the qualification to carry out the production and sales of olopatadine hydrochloride eye drops, will further enrich the product line of Spike Pharmaceuticals, help to enhance the competitiveness of the company's pharmaceutical business. (Xia Yingpin)
2020
07-31