concentrate on specialization
Release time:
2022-03-11
Group Company 2021 Innovation Expert Pharmaceutical Company Production Department Zhu Guoping
2021 is the sixth year of my peak employment. Looking back, I started my internship as a water station operator. After the end of the internship period, I was first assigned to the electrician class to strengthen the training of basic operation skills. Here, I met good teachers and helpful friends. It is said that the master leads the door and the practice depends on the individual. It is actually my luck to meet a good master who is willing to teach. My master was Wu Guangjun, the electrical supervisor of the engineering department. For me, who was full of knowledge but had no practical experience when I first went to university, he was my first teacher. One thing that makes me remember deeply is that there was a technical reform in the workshop at that time, and I followed it. In the process, there was a problem that I couldn't figure out, so I asked him for advice. He explained it to me orally first, but I still didn't understand it. So he used a screwdriver as a pen and the earth as paper to depict the schematic diagram and explain it for me. Under such teaching, can I not be excellent?
After working in the electrician class for two years, I was assigned to the production workshop to study and research the production equipment in depth, in order to lay a solid foundation for future technical transformation or performance improvement, a year later I was transferred to the engineering department, devoted myself to the work related to engineering equipment automation, and began my personal practice. At first, I wrote my own program and often got into trouble. I would encounter logical impassability and signal output before the conditions were met. These problems often bother me, so Baidu "and I paid homage to Baozi " and became regular customers of Siemens Technology Center. Liao Changchu's "PLC Programming and Application" was even my pillow book. At that time, I thought how good it would be if these knowledge could appear in my mind out of thin air, but whose success is easily achieved without the lessons of failure. Fortunately, the factory leaders attached great importance to innovation and transformation and automation promotion, and spared no effort in my training. They arranged me to participate in automation training, encouraged me to boldly carry out system transformation and program optimization on the premise of taking preventive measures, and relieved me of my worry about the failure of transformation, it also strengthens my confidence in innovation and transformation ... With the accumulation of professional knowledge, the improvement of experience and skills, and the support and trust of leaders, what I need to do next is to roll up my sleeves and work hard to give back to the company's cultivation and expectations of me.
2021 , this year can be said to be a year of thick accumulation and thin hair. I completed the automatic switching transformation of the gate of the rainwater direct drainage port and the primary rainwater collection pool, thus realizing the innovative transformation of the gate switch from manual to semi-automatic to finally automatic switching according to the amount of rainfall. The program optimization was carried out on the refrigeration unit system of Jinxi comprehensive warehouse, and the fan in the warehouse was interlocked control, which could save more than 70,000 degrees of electricity, 34.6 of the total electricity consumption of the warehouse ; Through their usual program backup of the equipment in the workshop, in the event of PLC or touch screen failure, use new accessories to import backup to ensure normal production, in the process of Qiubin single dose line transformation, restore the air conditioning unit automatic control system, online monitoring system, in the SCADA system pre-preparation process, through continuous attempts to communicate with the old equipment, I reduced the cost of the communication module of each equipment from 4,000 to 500, reducing the project cost by more than 300,000. It is worth mentioning that during the construction of SCADA , the wiring was completed by the electrician in the factory, and the cables were purchased from the peak cable factory.
2022 , the focus of our work is still on the construction of SCADA system, which is the basis of digitalization. It is not only data visualization and data display, but also empowering enterprises and providing better products, services and management mechanisms. For me personally, my direction is very clear now. I want to concentrate on automation, specialize in automation, and specialize in automation.
(according to Zhu Guoping's speech at the group company's summary commendation meeting)
More information
The company's vocational skill level self-identification training began.
After preparing the handout materials and question bank for the previous stage of vocational skill grade identification training, daye peak cement company conducted the vocational skill grade identification training for the machine repair team of the manufacturing department on August 10. On August 12 and 18, the pharmaceutical company also organized two phases of vocational skill level identification training for pharmaceutical preparation workers. According to the national skill level standard, the group company is divided into four grades: grade 5/junior worker, grade 4/intermediate worker, grade 3/senior worker and grade 2/technician. According to the analysis of employee registration, since there is only one type of job for pharmaceutical preparation workers, and cement production workers include cement central controller, cement quality inspector, cement clinker calciner, cement manufacturer, cement production inspection worker and other types of jobs, the number of applicants is less than that of cement production workers. Most of the employees who signed up were identified as participating in the four levels of vocational skills. According to preliminary statistics, there are now 155 employees who have signed up for their professional skill level, including 47 pharmaceutical preparation workers and 108 cement production workers. The human resources department of the group company is stepping up efforts to organize personnel to examine the qualifications of the employees whose registration grades are identified, and then enter the Zhejiang professional ability integration platform for formal registration after passing the examination. According to the national vocational skill standards and other content, each unit carries out targeted training for employees who participate in the independent identification of vocational skill levels. The training is conducted through on-site teaching, online teaching, and learning platform question bank exercises. After the training, the group company will organize the employees who participate in the grade identification to carry out examination and assessment, and those who pass the examination will complete the grade identification and issue the skill grade certificate. It is understood that in order to ensure the quality of vocational skill level identification, after the company was approved to independently identify the vocational skill level, the human resources department of the group organized all units to compile the question bank for various types of work in combination with the actual situation of the enterprise and with reference to the national vocational skill standards and training syllabus and other materials. after classification, unification and standardization, verification and proofreading, the preparation of the question bank has been basically completed. After being submitted to the superior unit for examination and approval, the company will import the question bank on the enterprise university platform to facilitate employees to prepare for the examination. The question bank for the independent identification of vocational skills level will also be extracted from the question banks of various industries, including professional ethics, basic knowledge, safety and environmental protection knowledge, laws and regulations knowledge, professional work practice and other national vocational skills standards. Basic requirements. The examination and assessment for independent determination of vocational skill level is tentatively scheduled for mid-September.
2021
08-23
Hu Guoyun, vice mayor of Pu'er, visited the peak
On July 16, a delegation led by Hu Guoyun, vice mayor of Pu'er City, Yunnan Province, and heads of Pu'er SASAC, Industrial Park Management Committee, Investment Promotion Bureau and other departments visited the headquarters of the group company. In the exchange with Jiang Xiaomeng, Yu Jianhong and other group leaders, Hu Guoyun expressed his gratitude to Jianfeng Group on behalf of the Pu'er Municipal Party Committee and Municipal Government. He said that the investment and entrepreneurship from Jianfeng to Pu'er not only promoted the development of Pu'er's regional industrial economy, but also made outstanding contributions to the local poverty alleviation. The two sides also exchanged and discussed issues such as strengthening in-depth cooperation between the two sides.
2021
07-21
Municipal SASAC Party Committee Visited Jianfeng Old Party Member
On June 28, Huang Zunhui, a second-level researcher of the State-owned Assets Supervision and Administration Commission of Jinhua City, visited Jianfeng Group and made a special trip to visit two retired party members, Chen Bingxiang and Yin Rongfu. Among the two Jianfeng veteran party members, Chen Bingxiang has been engaged in party affairs for nearly 30 years, and Yin Rongfu has won the honor of outstanding party members in Zhejiang Province and is a representative of Jianfeng party workers and party members. On behalf of the party committee of the Municipal State-owned assets Supervision and Administration Commission, Huang Zunhui expressed condolences to the two veteran party members, thanked the older generation of party members for their contributions, and exchanged views with Jiang Xiaomeng, secretary of the party committee and chairman of the group, and Qin Xuping, member of the party committee and chairman of the trade union, and fully affirmed the development of peak in recent years and the improvement of the level of party building work.
2021
07-12
"I'll teach you a lesson." Concluded successfully.
On the afternoon of June 24, as one of the highlights of the company's 2021 safety production month series of activities, the second phase of the "I'll give you a lesson" safety training was held at the group headquarters. the management personnel, production backbones and personnel from all departments and offices of the group gathered at the scene. foreign enterprises took safety "big lessons" through video, which was more effective than the teaching. At this point, the "I'll give you a lesson" safety training has come to a successful conclusion.
2021
07-12
Glory in the Party's 50-year-old Party Member Xi Ling Commemorative Medal
On June 23, the party committee of the group company sent a special person to visit and awarded the commemorative medals of "50 years of Glory in the Party" to six veteran party members. 2021 is the 100 anniversary of the founding of the Communist Party of China. For the first time, the Party Central Committee issued the "50 Years of Glory in the Party" commemorative medal to surviving party members who have reached the 50th anniversary of the party and have always performed well. The Organization Department of the Central Committee also specially issued the "Administrative Measures for the Issuance of Commemorative Medals of" Glory in the Party for 50 Years "", which stipulates the issuance procedures, issuance methods, production, and management of commemorative medals. In the future, the "50 Years of Glory in the Party" commemorative medal will be issued as a regular task and will be issued once every year around July 1.
2021
07-12
What is the exact time of the first Congress of the Communist Party of China? Which "big" representatives boarded the red boat in South Lake? What is the connection between the 1972 Sino-US Joint Communique and Hangzhou? On the morning of June 24th, the Party Committee of the Group Company invited members of the Party History Learning and Education Group of Zhejiang Provincial Party Committee and the vice president of Zhejiang Branch of China News Service to give a special party class of "returning to the scene of party history and reappearing the moment of party history" for the party members and cadres of the Company.
2021
07-01
Contact Us
No. 88 Wujiang East Road, Jinhua City, Zhejiang Province, China
Tel: +86-579-82326868
Fax : +86-579-82324666
©2023 Zhejiang Jianfeng Group Co., Ltd. Powered by: www.300.cn SEO Business License
SAF Coolest v1.2 设置面板 SHJSS-AHDB-FSSQE-ZSW
无数据提示
Sorry, the current column has no content !
You can view other columns or return to Home Page