Centennial of the Communist Party of China (18)
Release time:
2021-10-21
2011
2# April 22 -3# August 5 , due to major changes in Libya's domestic situation, the Chinese government organized ships and planes in batches to safely and orderly evacuate Chinese personnel 35860 in Libya. This is the largest organized evacuation of Chinese citizens overseas since the founding of New China. 2012
11
August8 -14 , the 18th National Congress of the Communist Party of China was held. The report adopted by the Congress, "unswervingly advancing along the road of socialism with Chinese characteristics and striving for building a moderately prosperous society in an all-round way", defines the goal of building a moderately prosperous society in an all-round way and deepening reform and opening up in an all-round way, and expounds the scientific connotations and interconnections of the road of socialism with Chinese characteristics, the theoretical system of socialism with Chinese characteristics, and the socialist system with Chinese characteristics. The Congress adopted the Constitution of the Communist Party of China (Amendment), which established the scientific concept of development, together with Marxism-Leninism, Mao Zedong thought, Deng Xiaoping Theory, and the important thought of "three represents " as the guiding ideology of the party and included it in the party constitution. 11 September
29, Xi Jinping pointed out when visiting the "Road to Rejuvenation" exhibition at the National Museum that realizing the great rejuvenation of the Chinese nation is the greatest dream of the Chinese nation since modern times. 12 April
7-11 , Xi Jinping pointed out in his speech during his inspection work in Guangdong that China's reform has entered a critical period and deep water area, and we must seize the opportunity to deepen reform in important areas with greater political courage and wisdom. We must adhere to the correct direction of reform and opening up, dare to bite hard bones, dare to venture into dangerous beaches, and ensure that reform does not stop and opening up does not stop. 2013
1 April
21-22 , the second plenary session of the 18th Central Commission for Discipline Inspection was held. Xi Jinping's speech emphasized that it is necessary to insist on fighting "Tigers " and "Flies " together, not only resolutely investigate and deal with cases of violations of discipline and law by leading cadres, but also effectively solve the problems of unhealthy practices and corruption that occur around the masses; It is necessary to strengthen the restriction and supervision of the operation of power, and put power in the cage of the system. 3 July
23, Xi Jinping delivered a speech at the Moscow Institute of International Relations in Russia, advocating the construction of a community of human destiny and calling on all countries to jointly promote the establishment of a new type of international relations with win-win cooperation as the core. 4 February
24, in order to meet the new requirements of functional transformation, the executive meeting of the State Council decided to cancel and delegate 71 administrative examination and approval items first. By the end of 2020 , the State Council has focused on promoting the reform of streamlining administration and delegating power, combining decentralization with decentralization and optimizing services (hereinafter referred to as "decentralization and service " ). The proportion of administrative examination and approval items of State Council departments has been canceled and delegated to 47% , completely ending non-administrative license examination and approval, and reducing administrative examination and approval intermediary services of State Council departments by 71% . Pre-approval items for industrial and commercial registration have been reduced by 87% , and the business environment in China has improved significantly. On January 17 , the State Council formally approved the establishment of the China (Shanghai) Pilot Free Trade Zone. On
9June 7 and 10
January3 , Xi Jinping delivered speeches in Kazakhstan and Indonesia respectively, proposing to jointly build "Silk Road Economic Belt " and "21 Century Maritime Silk Road " initiatives. 11 03 9 -12
, the Third Plenary Session of the 18th CPC Central Committee was held. The Plenary adopted the Decision on Several Major Issues Concerning Comprehensively Deepening Reform. The plenary session pointed out that the overall goal of comprehensively deepening the reform is to improve and develop the socialist system with Chinese characteristics and promote the modernization of the national governance system and governance capacity; the core issue of economic system reform is to properly handle the relationship between the government and the market, so that the market can play a decisive role in the allocation of resources and give better play to the role of the government.12 October 11 , the general office of the CPC central Committee issued the opinions on cultivating and practicing socialist core values. It is pointed out that prosperity, democracy, civilization, harmony, freedom, equality, justice, rule of law, patriotism, dedication, integrity and friendliness are the basic contents of socialist core values.
20141# November August 2
, the CPC Central Committee and the State Council issued "Several Opinions on Comprehensively Deepening Rural Reform and Accelerating Agricultural Modernization". It is pointed out that holding the rice bowl firmly in one's own hands is the basic policy that must be adhered to for a long time.November 12 March
19Day -21 Day, the first world internet conference was held in Wuzhen, Zhejiang Province. The meeting identified Wuzhen as the permanent site of the World Internet Conference.
2015July 13 March 1 , the State Council issued the "Guiding Opinions on Actively Promoting "
Internet+"Action".
9 February 28 , Xi Jinping attended and delivered a speech at the general debate of the UN General Assembly at 145 , stressing the need to inherit and carry forward the purposes and principles of the UN Charter, build a new type of international relations with win-win cooperation as the core, and build a community of human destiny. 10 September
5, Tu Youyou, a researcher at the Chinese Academy of Traditional Chinese Medicine, won the 2015 Nobel Prize in Physiology or Medicine. This is the first time that a Chinese scientist has won the Nobel Prize for scientific research conducted in China, and it is the highest award won by the Chinese medical community so far. 11 June
7, Xi Jinping and Taiwan leader Ma Ying-jeou met in Singapore to exchange views on further promoting the peaceful development of cross-strait relations. This is the first meeting between leaders on both sides of the strait since 1949 , creating a precedent for direct dialogue and communication between leaders on both sides of the strait.
More information
Jiang Xiaomeng Yunnan Jianfeng Lectures on Party Lessons
In order to implement the requirements of the higher-level party committee secretary to give in-depth party lectures in enterprises, on July 4, Jiang Xiaomeng, secretary of the party committee and chairman of the group company, gave a special lecture on "two studies and one doing" for party members at Yunnan Jianfeng Cement Company. In the lecture, Jiang Xiaomeng started from the background, overall requirements, learning and education content, and main measures of the "two studies and one doing" activities. He hoped that all party members and cadres would understand "awe, gratitude, humility, and decent", and put forward "What should the current enterprise do" and "How should the enterprise go in the future" and other issues. Jiang Xiaomeng analyzed the future development trend of cement and pharmaceutical industries in detail, emphasized the importance of seizing opportunities, and pointed out that with the homogenization of cement industry becoming more and more serious, if we want to take the road of differentiated brand development, the core of competition is to strengthen self management and maximize the cost, so as to improve the competitive advantage. As far as Yunnan Jianfeng is concerned, it is necessary to continuously improve the level of process technology management and increase the hourly output by increasing inspection efforts. Starting from strengthening the control of raw material procurement, the quality and price should be controlled. By strengthening sales management, vigorously develop direct agents, and strive to maximize the profit per ton; By strengthening equipment maintenance, reduce equipment accidents and further reduce the consumption of machine materials; Make good use of people, while constantly tapping talents and cultivating new people, we will gradually control the total number of workers and improve labor productivity. According to the current situation and the company's development strategy, what should the party members of the peak do? Jiang Xiaomeng asked all the party members and cadres of Yunnan peak to play a good vanguard and exemplary role and take the lead in learning new knowledge, new technology and new experience.
2020
07-30
Yunnan Peak Starts Secondary Security Standardization Creation
On June 19, Yunnan Jianfeng cement company held a mobilization meeting to further implement the requirements of the State Council, Yunnan Province, Pu'er City and Simao District Safety Supervision Bureau on carrying out safety production standardization work, and deploy the secondary safety standardization work. At the meeting, Liu Shenghua, deputy general manager of Yunnan Jianfeng, read out the requirements and work arrangements for creating a secondary enterprise for safety production standardization. The representative of Yunnan superstar Safety Technology Service Co., Ltd., the evaluation unit of safety production standardization, explained in detail the relevant knowledge of safety production standardization consultation and evaluation for the participants, and explained the requirements, standards and other elements of safety production standardization work. Zhou Jiping, general manager of Yunnan Jianfeng, mobilized the establishment of secondary safety production standardization at the meeting, requiring all workshops and departments to prepare and report the data before the end of October, and both software and hardware meet the acceptance conditions, so as to complete the bid creation work by the end of the year. Through the mobilization meeting, the responsible persons of Yunnan Jianfeng and superstar companies and relevant personnel had in-depth exchanges, further unified their thinking, and improved Yunnan Jianfeng employees' understanding of safety production standardization. Everyone recognizes that carrying out safety production standardization work is not only to implement the spirit of a series of documents of the party and the country, but also a mandatory requirement of the government for enterprises, and it is also the need for the sustainable and healthy development of enterprises themselves. Through the development of safety production standardization, enterprises can be promoted to establish and improve the safety production responsibility system, improve the safety production management system, standardize the production operation behavior, investigate and control the hidden dangers of accidents, effectively control the sources of danger, make the production equipment and facilities meet the safety standards, and continuously improve
2020
07-31
Yunnan Peak Starts Secondary Security Standardization Creation
On June 19, Yunnan Jianfeng cement company held a mobilization meeting to further implement the requirements of the State Council, Yunnan Province, Pu'er City and Simao District Safety Supervision Bureau on carrying out safety production standardization work, and deploy the secondary safety standardization work. At the meeting, Liu Shenghua, deputy general manager of Yunnan Jianfeng, read out the requirements and work arrangements for creating a secondary enterprise for safety production standardization. The representative of Yunnan superstar Safety Technology Service Co., Ltd., the evaluation unit of safety production standardization, explained in detail the relevant knowledge of safety production standardization consultation and evaluation for the participants, and explained the requirements, standards and other elements of safety production standardization work. Zhou Jiping, general manager of Yunnan Jianfeng, mobilized the establishment of secondary safety production standardization at the meeting, requiring all workshops and departments to prepare and report the data before the end of October, and both software and hardware meet the acceptance conditions, so as to complete the bid creation work by the end of the year. Through the mobilization meeting, the responsible persons of Yunnan Jianfeng and superstar companies and relevant personnel had in-depth exchanges, further unified their thinking, and improved Yunnan Jianfeng employees' understanding of safety production standardization. Everyone recognizes that carrying out safety production standardization work is not only to implement the spirit of a series of documents of the party and the country, but also a mandatory requirement of the government for enterprises, and it is also the need for the sustainable and healthy development of enterprises themselves. Through the development of safety production standardization, enterprises can be promoted to establish and improve the safety production responsibility system, improve the safety production management system, standardize the production operation behavior, investigate and control the hidden dangers of accidents, effectively control the sources of danger, make the production equipment and facilities meet the safety standards, and continuously improve
2020
07-31
Yunnan Peak Starts Secondary Security Standardization Creation
On June 19, Yunnan Jianfeng cement company held a mobilization meeting to further implement the requirements of the State Council, Yunnan Province, Pu'er City and Simao District Safety Supervision Bureau on carrying out safety production standardization work, and deploy the secondary safety standardization work. At the meeting, Liu Shenghua, deputy general manager of Yunnan Jianfeng, read out the requirements and work arrangements for creating a secondary enterprise for safety production standardization. The representative of Yunnan superstar Safety Technology Service Co., Ltd., the evaluation unit of safety production standardization, explained in detail the relevant knowledge of safety production standardization consultation and evaluation for the participants, and explained the requirements, standards and other elements of safety production standardization work. Zhou Jiping, general manager of Yunnan Jianfeng, mobilized the establishment of secondary safety production standardization at the meeting, requiring all workshops and departments to prepare and report the data before the end of October, and both software and hardware meet the acceptance conditions, so as to complete the bid creation work by the end of the year. Through the mobilization meeting, the responsible persons of Yunnan Jianfeng and superstar companies and relevant personnel had in-depth exchanges, further unified their thinking, and improved Yunnan Jianfeng employees' understanding of safety production standardization. Everyone recognizes that carrying out safety production standardization work is not only to implement the spirit of a series of documents of the party and the country, but also a mandatory requirement of the government for enterprises, and it is also the need for the sustainable and healthy development of enterprises themselves. Through the development of safety production standardization, enterprises can be promoted to establish and improve the safety production responsibility system, improve the safety production management system, standardize the production operation behavior, investigate and control the hidden dangers of accidents, effectively control the sources of danger, make the production equipment and facilities meet the safety standards, and continuously improve
2020
07-30
The Company shall organize special operation safety management training
What kind of management process is needed for the special operation permit? How to manage the ticket of the special operation permit? What are the contents of the eight kinds of special operations?... On June 17, the safety committee of the group company organized a special lecture on safety production to conduct systematic and comprehensive training on the safety management knowledge of special operations. The trainer invited for this training is Ge Zhengliang, head of EHS (Environmental Environment, Health Health, Safety) of Zhejiang Prodbang Pharmaceutical Co., Ltd. He has many years of experience in enterprise safety production management and is also a well-known safety management expert in Jinhua region. He has participated in the enterprise safety and environmental protection inspection organized by Jinhua Safety Supervision Bureau for many times and has a certain understanding of the situation of major enterprises in the peak. In this lecture, Ge Zhengliang divided into four parts: division of special operation license scope, special operation license management process, special operation license ticket management, and eight major types of special operation contents. Combined with relevant laws and regulations and his own practical experience in safety production management, Ge Zhengliang explained in simple terms eight special operation situations such as hot work, hoisting, high place, temporary power consumption, open circuit, blind plate plugging, restricted space, etc, standardize the licensed business division, approval department, the places to be paid attention to in the approval management of each type of operation, the responsibilities of the relevant approval department, the matters needing attention in on-site operation, the approval process, ticket management and other knowledge, and make a detailed description of the relevant special operation contents according to the working characteristics of peak subordinate enterprises. In addition, he also shared the experience of special operation safety management of Plo Pharmaceutical.
2020
07-31
Yunnan Jianfeng won the honor of "key leading enterprise in Pu'er City"
Recently, Yunnan Jianfeng Cement Company was awarded the honorary title of "2016 Pu'er Key Leading Enterprise" by the Pu'er Municipal Party Committee and Municipal Government. In recent years, according to the requirements of the group company's "three reductions and three improvements", Yunnan Jianfeng has focused on internal management and external market expansion, tried every means to reduce costs in production, timely controlled market trends in sales, and constantly refreshed various business indicators. While striving to create its own brand value, Yunnan Jianfeng always regards giving back to the society and serving local development as its own responsibility and obligation. Since the establishment of the company, Yunnan Jianfeng has actively responded to the government's call to support the construction of poor border areas and provide free cement to some poor people. Support the education construction in border areas and donate funds for students in need. At the same time, it has paid various taxes and fees on time in accordance with the law and has become a major profit and tax producer in Pu'er City for years. It has gradually grown from a new cement enterprise in Pu'er area to a leading enterprise in the cement industry. The honor of "key leading enterprises in Pu'er City in 2016" is the affirmation and recognition of Yunnan Jianfeng's work over the past few years by the local government and society. During the "Thirteenth Five-Year Plan" period, southwestern Yunnan is about to usher in an explosive stage of development. The construction of international railway projects, the construction of border expressway projects, the construction of airport projects and the construction of people's livelihood projects will all start this year. The acquisition of the honorary title of "Key Leading Enterprise in Pu'er City in 2016" will also provide strong support for Yunnan Jianfeng to strive for the right to supply these projects. (Li Yun)
2020
07-31