News Center

Home page

Peak Report

News reports

World Quality Zhejiang Manufacturing Peak Cable Won "Product Word Label"

Release time:

2021-09-22

News from our newspaper 9# March 7 , Jianfeng Communication Cable Company officially obtained the "Made in Zhejiang" certification certificate issued by China Quality Certification Center. The twisted pair communication cable for high-speed data transmission produced by the company (commonly known as "Super Class 5 cable" in the past) can from now on use the "product word mark" representing the quality benchmark of Zhejiang manufacturing industry in advertising and product packaging ".

"Made in Zhejiang" is a regional public brand built by the Zhejiang Provincial Party Committee and Government. It is a certification standard launched to promote the transformation and upgrading of the manufacturing industry and promote the high-quality development of the manufacturing industry with the goal of high-quality and high-end. The standard is composed of the local standard of "made in Zhejiang" evaluation standard formulated by the Provincial Bureau of quality supervision and a series of "made in Zhejiang" product standards formulated by relevant industry associations and backbone enterprises. It adheres to the positioning of "first-class in China and advanced in the world", and requires better than the national industry standards and international advanced standards, Strive to effectively improve the overall quality image and competitiveness of "made in Zhejiang. Since its inception in 2013 , the "product label" has gradually built a standard system that embodies the core elements of "careful design, excellent material selection, precision manufacturing, and precise service" and covers the entire life cycle of products. It has become an effective yardstick for Zhejiang's industry to improve quality and promote the high-quality development of Zhejiang's manufacturing industry.

"High Standard Strict Certification" is the basic principle of "Made in Zhejiang" certification. As early as 2019 , the cable company learned about the relevant information of "Made in Zhejiang" and realized the gap with the certification standard. With the upgrading of equipment, product quality, technical indicators continue to improve, 2020 in the first half of the year, the cable company "Zhejiang manufacturing" certification declaration work officially launched. After all aspects of preparation, including third-party consultation and guidance, preparation of materials, product testing, model testing and other work, the cable company finally completed the preparatory work within the deadline, and passed the certification body appraisal and expert on-site review and inspection in early January this year. Behind the success of in getting the "product word mark" is the strict control of product quality accumulated by the cable company for more than 20 years. In recent years, the cable company has continuously upgraded the hardware equipment, such as improving the concentricity by improving the extruder mold. Made a multi-head active pay-off frame to improve the tension balance of the product; Improve the sheath head movement, so that the extrusion pressure of the extruder is uniform, the wall thickness is uniform, the coating is tight, and the margin of the index is retained to the maximum extent. For the data cable that has obtained the "product wordmark" this time, the key technical indexes such as attenuation, return loss, near-end crosstalk attenuation, near-end crosstalk attenuation power sum, far-end crosstalk attenuation ratio, far-end crosstalk attenuation ratio power sum and so on are all higher than the requirements of industry standards and international standards, and the frequency point of the test index of transmission performance is also extended from

4-100MHz

specified by industry standards to 1-125MHz , in quality and performance are in the leading position of similar products. Getting the "word mark" is not once and for all. According to the person in charge of the cable company, the market supervision department will often seize the target enterprises, and the authorization qualification will be revoked when the product quality cannot be guaranteed. Therefore, "product word mark" is not only honor, but also pressure and motivation. This certification is a benchmarking certification based on existing industry group standards. Cable companies will use this as an opportunity to enhance the market competitiveness of data cable products, create industry quality benchmarks, and strive to be independent in the subway dedicated communication cable. In terms of key products, it has become a standard setter and is at the forefront of the industry in market segments.

(Reporter

Chen Shengmu)

More information

Inferior spikes do this

In the eastern corner of the production area of Jianfeng Health Technology Company, there is a very inconspicuous building. From below, only a few pipes of uneven thickness can be seen on the top and the slogan "Focus on Environmental Protection and Promote Sustainable Development" with red letters on the yellow background on the stainless steel guardrail. Walking up, you can only see several closed pools and a small room with stacks of documents, test tubes, glass bottles and other testing tools on the table. This is the peak and healthy sewage treatment station. The production sewage of the whole factory area is concentrated here. After adjustment (PH adjustment), pre-acidification, anaerobic, anoxic, aerobic (aeration), precipitation and other links, it is discharged into the pipe network after reaching the special discharge standard. Yin Zhiwu, executive deputy general manager of Jianfeng Health, said that because the sewage treatment station in Wucheng District has not yet been built, Jianfeng Health has not yet been able to achieve pipe discharge, and the relevant national laws have strict requirements on the discharge of water pollutants from the extraction pharmaceutical industry. Sewage discharge must reach a special discharge limit, that is, chemical oxygen demand (COD) must be less than 50 mg/L. Enterprise development and environmental protection are both the concept of peak health since its establishment. In March this year, on the basis of the original environmental protection facilities, Jianfeng Health carried out technical renovation of waste gas collection and treatment facilities, and at the same time installed a sealing cover on the sewage treatment station to realize the closed collection of waste gas. Since the trial operation of this facility in mid-May, the overall effect has been obvious. The original treatment tank would emit an unpleasant smell during work, but now the smell has been significantly reduced. Compared with the young enterprise of peak health, the relatively "older" peak pharmaceutical has more experience in sewage treatment and environmental protection. Akihama

2020

07-31

2016 Annual General Meeting of Shareholders

News from our newspaper On May 19, the on-site meeting of Jianfeng Group's 2016 Annual General Meeting of Shareholders was held in Conference Room 314 of Jianfeng Building to deliberate and pass the "2016 Annual Report on the Work of the Board of Directors" and other proposals. The meeting was convened by the board of directors of Jianfeng Group and chaired by Chairman Jiang Xiaomeng. A total of 6 shareholders and proxies attended the meeting, and the total number of voting shares held by them was 55,604,815, accounting for 16.16 of the total voting shares of the company. Some directors, supervisors and secretary of the board of directors of the company attended the meeting, and some senior managers attended the meeting as nonvoting delegates. The meeting was held and voted on by a combination of on-site voting and online voting, it deliberated and passed nine proposals, including the 2016 Work Report of the Board of Directors, the 2016 Work Report of the Board of Supervisors, the 2016 Financial Final Accounts Report, the 2016 Profit Distribution Proposal, the Proposal to Hire the Company's 2017 Audit Institution, the Proposal to Provide Guarantee to Holding Subsidiaries, the 2016 Annual Report and its Summary, the Election of Mr. Huang Sujian as Director of the Company and the Election of Mr. Chen Tianci as Supervisor of the Company. (Zhou Hengbin)

2020

07-31

2016 Annual General Meeting of Shareholders

2020

07-31

2016 Annual General Meeting of Shareholders

2020

07-30

Jianfeng Pharmaceutical Won Advanced Collective of Municipal Red Cross Humanitarian Promotion Award

On April 24, the Red Cross Society of Jinhua issued a circular commending the advanced units and individuals of the 2016 Red Cross Humanitarian Promotion Award. Peak Pharmaceutical Company won the Red Cross Humanitarian Promotion Award for Advanced Collective. The Red Cross is a social relief organization engaged in humanitarian work, with the purpose of carrying forward the spirit of humanity, fraternity and dedication, protecting human life and health, and promoting the cause of peace and progress of mankind. As a socially responsible enterprise, Jianfeng Pharmaceutical has always attached importance to public welfare and charity work, vigorously promoted the spirit of the Red Cross, and vigorously supported the work of the Red Cross with practical actions. In September 2016, at the theme publicity activity of "World First Aid Day" and the opening ceremony of the municipal Red Cross emergency rescue station (point), Huang Jinlong, deputy general manager of the group company and general manager of the pharmaceutical company, donated 6 AEDs known as "life-saving artifact" to the Red Cross on behalf of Jianfeng Pharmaceutical, it is equipped with six Red Cross emergency rescue service stations (points), namely, Jinhua high-speed railway station, sports center, cultural center, Shuanglong scenic spot, Siping village scenic spot and Suoyuan village scenic spot. The configuration of AED equipment has played a very good role in improving the emergency rescue capacity of Jinhua's key locations, and has been affirmed by the Red Cross and related units. (Spike Pharmaceuticals)

2020

07-31

Jingmai Airport Test Flight Successfully Runway Cement Spike Manufacturing

On April 7, a Boeing 737-700 aircraft of China Eastern Airlines Yunnan took off from Kunming. After completing two flight test subjects, it landed safely at Lancang Jingmai Airport. This not only marked the basic completion of the airport flight area, The official start of the test flight also marked that the "Peak" brand airport runway cement passed the first "final exam". Lancang Jingmai Airport is a major project with milestone significance in the history of Pu'er transportation construction. Since then, an air corridor connecting southwest Yunnan and Southeast Asia has been added between Kunming and Pu'er, which will greatly promote the development and utilization of tourism resources in Lancang, Menglian and Ximeng "Pu'er Green Triangle" area, and promote the sustainable development of local economy and society; it is of great significance to strengthen the city's national defense construction, maintain border stability, promote national unity, improve emergency rescue capabilities, and promote Pu'er's integration into the country's "Belt and Road" construction. Since the start of the construction of the airport, Yunnan Jianfeng has been paying close attention to it, organizing technical research and repeated tests, and finally produced high-quality airport runway special cement, and with excellent product quality, superior product performance and high-quality service, it has become a runway for Lancang Airport. Cement manufacturer. This not only fills the gap of "peak" airport special cement, but also is of great significance to promote the "peak" brand and improve the market influence of enterprises. It is understood that Jingmai Airport is initially confirmed to be officially opened to traffic at the end of May. (Li Liangping)

2020

07-31

< 1...46 47 48...61 > 跳转到页