Interpretation of the New Safety Production Law
Release time:
2021-08-02
The new "Safety Production Law" will come into effect on 2021 9# April 1 .
This revision of the Work Safety Law involves a total of 42 clauses, accounting for about 1/3 of the original clauses. The revised Work Safety Law strengthens the main responsibility of enterprises and at the same time increases the punishment for illegal acts. The punishment for enterprises is 170000 from the current 20 to 2000, raise to 30 ~1 .1 billion yuan, with no upper limit on daily penalty; The amount of accident fine for the main person in charge of the unit was increased from 30% ~ 80% of annual income to 40% ~ 100 .
The revision of the Safety Production Law mainly includes five aspects:The general idea of the revision of the Safety Production Law
1. to adhere to the concept of people-centered, firmly establish the concept of safety development, promote the idea of life first and safety first, and firmly adhere to the red line that development must not be at the expense of safety.
2. further implement the main responsibility of enterprise safety production, improve the safety prevention and control system, and resolutely curb the occurrence of major production safety accidents.
3. improve the implementation of safety supervision system, mechanism and responsibility system, enhance the effectiveness of supervision.
4. promote governance according to law and improve the level of the rule of law in production safety.
respects life, health and safety, highlighting the supremacy of life
2021
edition of the new safety law for the first time writes"insists on the supremacy of people and life, and puts the protection of people's life and safety in the first place " into the safety production law.
to increase the safety of production funds, materials, technology, personnel investment guarantee, improve the safety of production conditions. People's governments at all levels shall strengthen the construction of production safety infrastructure and the construction of production safety supervision capacity.Production and business units should pay attention to the physical, psychological conditions and behavior habits of employees, strengthen psychological counseling and spiritual comfort for employees, strictly implement job safety production responsibilities, and prevent accidents caused by abnormal behavior of employees.
increased the punishment for violations of the law, with the punishment intensity
"the most severe in history", for example: the accident fine is the maximum fine "20 yuan ~2000 yuan " stipulated in the 2014 edition of , increase to "30 yuan ~1 .8 billion yuan " .
Attach importance to risk management and control, try to find ways to eliminate hidden dangers of accidents; Attach importance to emergency management and emergency capacity building, and strive to eliminate and slow down accident losses, especially to avoid the loss of the right to life.
Focus on New Problems and New Risks Prevention and ResponseDeeply Drawing on the painful lessons of production safety accidents in recent years, it has made targeted regulations on new problems exposed in production safety accidents. For example, if production and business units in catering and other industries use gas, they shall install combustible gas alarm devices and ensure their normal use.
Construction units of mines, metal smelting construction projects and construction projects for the production, storage, loading and unloading of dangerous goods shall strengthen the safety management of construction projects, and shall not resell, lease, lend, affiliation or illegally transfer construction qualifications in other forms, it is not allowed to subcontract all the construction projects it has contracted to a third party or to subcontract all the construction projects it has contracted to a third party in the name of subcontracting, and it is not allowed to subcontract the projects to a unit that does not have the corresponding qualifications.
The institution responsible for safety evaluation, certification, testing, and inspection shall have the qualifications prescribed by the state, and shall be responsible for the legality and authenticity of the safety evaluation, certification, testing, and inspection results made by it. Institutions responsible for safety evaluation, certification, testing and inspection shall establish and implement a system of service disclosure and report disclosure, and shall not lease qualifications, affiliation or issue false reports.
Punishment for Illegal Acts
"# Strict in 105 History"
Punishment Amount "# Highest in 111 History" .
2021edition of the new safety law has generally increased the amount of fines for illegal acts. for accidents that are of great concern to everyone, the maximum fine stipulated in 2014 edition has been increased from .19 million yuan ~2000 .21 million yuan 118 "to " 30 .25 million yuan ~1 .7 billion yuan "; the amount of accident fines imposed on the main responsible persons of production and business operation units will be increased from 30% ~ 80% of the annual income of stipulated in the 2014 edition of to 40% ~ 100 of . punishment is more severe. For example, if the production and business operation unit fails to take measures to eliminate the hidden dangers of accidents, the "shall be ordered to make rectification first, and if it refuses to make rectification, it shall be ordered to suspend production and business for rectification and be fined " stipulated in the 2014
edition ofis revised to "shall be ordered to make rectification and be fined once found, and if it refuses to make rectification, it shall be ordered to suspend production and business for rectification, and may be fined continuously on a daily basis, refusal to rectify, to the local people's government to close the " . disciplinary penalties are even greater. We have increased the joint punishment and publicity of illegal and dishonest behaviors, increased the frequency of law enforcement, suspended project approval, raised relevant insurance rates, and banned industries or occupations, and publicized them to the public. Attaches Importance to Operation Management and Risk Control in High-risk Industries
2021New Safety Law Changes "
Hoisting" to
"Hoisting, Hot Work, Temporary Electricity " ; change "road transport unit " to "transport unit " ; Change "storage " to "storage, loading and unloading " ; change "locking and blocking " to "occupation, locking and blocking " ; Change "exit " to "exit, evacuation route " . to establish and improve the safety production responsibility system for all employees, strengthen the standardization and informatization of safety production, build a dual prevention mechanism for safety risk classification control and hidden danger investigation and management, improve the risk prevention and resolution mechanism, improve the level of safety production, and ensure safety production. adds an article "
production and business units in high-risk industries or fields that fail to take out production safety liability insurance in accordance with state regulations shall be ordered to make corrections within a time limit and be fined not less than 50,000 yuan but not more than 100,000 yuan and not more than 100,000 yuan"".
mining, metal smelting construction projects and construction projects for the production, storage, loading and unloading of dangerous goods construction units that fail to carry out safety management of construction projects in accordance with regulations shall be ordered to make corrections within a time limit and be fined less than 100,000 yuan; The above construction units that resell, rent, lend, link up or illegally transfer construction qualifications in other forms shall be ordered to suspend production and business for rectification, and the qualification certificate shall be revoked, confiscation of illegal income; If the illegal income is more than 100,000 yuan, a fine of not less than two times but not more than five times the illegal income shall be imposed. (according to the speech made by Chen Tianci, chairman of the group's board of supervisors, at the group's half-year work analysis meeting)
More information
Jingmai Airport Test Flight Successfully Runway Cement Spike Manufacturing
On April 7, a Boeing 737-700 aircraft of China Eastern Airlines Yunnan took off from Kunming. After completing two flight test subjects, it landed safely at Lancang Jingmai Airport. This not only marked the basic completion of the airport flight area, The official start of the test flight also marked that the "Peak" brand airport runway cement passed the first "final exam". Lancang Jingmai Airport is a major project with milestone significance in the history of Pu'er transportation construction. Since then, an air corridor connecting southwest Yunnan and Southeast Asia has been added between Kunming and Pu'er, which will greatly promote the development and utilization of tourism resources in Lancang, Menglian and Ximeng "Pu'er Green Triangle" area, and promote the sustainable development of local economy and society; it is of great significance to strengthen the city's national defense construction, maintain border stability, promote national unity, improve emergency rescue capabilities, and promote Pu'er's integration into the country's "Belt and Road" construction. Since the start of the construction of the airport, Yunnan Jianfeng has been paying close attention to it, organizing technical research and repeated tests, and finally produced high-quality airport runway special cement, and with excellent product quality, superior product performance and high-quality service, it has become a runway for Lancang Airport. Cement manufacturer. This not only fills the gap of "peak" airport special cement, but also is of great significance to promote the "peak" brand and improve the market influence of enterprises. It is understood that Jingmai Airport is initially confirmed to be officially opened to traffic at the end of May. (Li Liangping)
2020
07-31
Jianfeng Pharmaceutical Artificial Niuhuang Project Starts
News from this newspaper Jianfeng Pharmaceutical artificial bezoar technical transformation project recently started construction in Qiubin Factory. Artificial bezoar has the effect of clearing away heat and detoxification, resolving phlegm, and is commonly used in Chinese and Western medicines such as colds, clearing away heat and detoxification. As the vast majority of artificial bezoar-related preparations are national essential drugs, with the further implementation of the medical reform policy, the downstream industry of artificial bezoar will enter a new round of business cycle. Jianfeng Pharmaceutical has many years of experience in artificial bezoar production. The technological transformation project will use the existing workshop structure, public works and operators of Qiubin Factory to achieve an annual production capacity of 100 tons of artificial bezoar by adding production equipment such as double cone rotary vacuum drying, horizontal ball mill pulverizer unit, hopper and hoist, closed screening system, and upgrading some public systems. According to the project implementation plan, the project will complete the civil engineering in May. Complete the commissioning, testing and verification of equipment and facilities in July, with trial production conditions; Strive to complete the on-site inspection of GMP certification before the end of December. At present, the factory buildings in Qiubin are vacated and the site is cleaned up. It is understood that the production of natural bezoar is very small, the price is extremely high, and the market rarely provides it. As a biochemical API, artificial bezoar has fewer manufacturers. In the past, due to relatively loose supervision, the testing methods of raw materials and finished products are relatively simple, the quality control indicators are not perfect, and the quality of products on the market is uneven. It is imperative to improve the quality standards. To this end, the State Food and Drug Administration issued the "Biochemical Drug GMP Quality Management Practice (Draft for Comment)" at the end of 2016, which was implemented in March 2017. spike medicine
2020
07-31
Recently, Jianfeng Health has been awarded a number of plaques and certificates by the Department of Science and Technology of Zhejiang Province, the people's Government of Jinhua City, and the Science and Technology Bureau of Jinhua City. They are "Zhejiang Science and Technology small and medium-sized Enterprises", "Jinhua High-tech Enterprises", "Jinhua Agricultural Science and Technology Enterprises", "Jinhua Agricultural Science and Technology Research and Development Center" and so on. According to the relevant requirements, Zhejiang science and technology-based small and medium-sized enterprises must be small and medium-sized enterprises with independent intellectual property rights, proprietary technology or advanced knowledge, engaged in the research, development, production, sales and service of high-tech and its products, and the proportion of enterprises engaged in scientific and technological research and development personnel accounting for no less than 10% of the total number of employees in that year. Since its establishment, Jianfeng Health has attached great importance to the training of scientific and technological personnel, paid attention to the application of its own intellectual property rights, paid attention to product research and development and the protection of intellectual property rights, promoted the application of intellectual property rights, and encouraged employees to invent and create. By the end of 2016, a total of 8 invention patents and 5 appearance patents had been applied, and 1 invention patent and 5 appearance patents had been obtained. High-tech enterprises in Jinhua City must meet the requirements of the ''High-tech Fields Supported by the State, ''and continue to carry out research and development and technological achievements transformation. Their main products (services) have independent intellectual property rights (authorized, registered or accepted). There are certain requirements for the proportion of R & D personnel, the proportion of R & D funds and the income of high-tech products. The acquisition of high-tech enterprises in Jinhua City has laid the foundation for the further declaration of national high-tech enterprises in the future. In the identification of agricultural science and technology enterprises in Jinhua City, the field of peak health technology belongs to the deep processing technology and equipment of agricultural products, Chinese herbal pieces and plant extracts.
2020
07-31
Jingmai Airport Test Flight Successfully Runway Cement Spike Manufacturing
On April 7, a Boeing 737-700 aircraft of China Eastern Airlines Yunnan took off from Kunming. After completing two flight test subjects, it landed safely at Lancang Jingmai Airport. This not only marked the basic completion of the airport flight area, The official start of the test flight also marked that the "Peak" brand airport runway cement passed the first "final exam". Lancang Jingmai Airport is a major project with milestone significance in the history of Pu'er transportation construction. Since then, an air corridor connecting southwest Yunnan and Southeast Asia has been added between Kunming and Pu'er, which will greatly promote the development and utilization of tourism resources in Lancang, Menglian and Ximeng "Pu'er Green Triangle" area, and promote the sustainable development of local economy and society; it is of great significance to strengthen the city's national defense construction, maintain border stability, promote national unity, improve emergency rescue capabilities, and promote Pu'er's integration into the country's "Belt and Road" construction. Since the start of the construction of the airport, Yunnan Jianfeng has been paying close attention to it, organizing technical research and repeated tests, and finally produced high-quality airport runway special cement, and with excellent product quality, superior product performance and high-quality service, it has become a runway for Lancang Airport. Cement manufacturer. This not only fills the gap of "peak" airport special cement, but also is of great significance to promote the "peak" brand and improve the market influence of enterprises. It is understood that Jingmai Airport is initially confirmed to be officially opened to traffic at the end of May. (Li Liangping)
2020
07-30
Peak Pharmaceutical was rated as a national intellectual property advantage enterprises
The score ranked first among Jinhua participating enterprises. A few days ago, Peak Pharmaceutical Company was rated as a national intellectual property advantage enterprise. The selection of national intellectual property advantage enterprises is organized by the State Intellectual Property Office. The purpose is to accelerate the formation of a group of Chinese intellectual property leading enterprises with independent intellectual property rights, well-known brands and international competitive advantages, and achieve the development goal of strong intellectual property enterprises. Since Jianfeng Pharmaceutical introduced the GB-T29490-2013 "Enterprise Intellectual Property Management Standard" in 2013, it has been rated as a patent demonstration enterprise in Zhejiang Province in 2013. In 2014, the "Jianfeng" trademark obtained a famous trademark in Zhejiang Province, and the first edition of the "Intellectual Property Manual" was compiled and implemented in 2015. In 2016, it passed the third-party certification of the GB-T29490-2013 "Enterprise Intellectual Property Management Standard". The "Jianfeng" trademark was rated as a well-known trademark by the State Administration of China. In the application and selection of national knowledge by superior enterprises, 52 enterprises in Zhejiang Province won this honor, ranking second in the country in number; Jianfeng Pharmaceutical ranked first among Jinhua participating enterprises. (Zhang Mingyin)
2020
07-31
Group Party Committee to determine the annual work plan
The party Committee of the group company has determined its work ideas and work plan for 2017 a few days ago, and relevant work has been arranged below. In view of the current new political and economic situation and the task of enterprise transformation and development, the general requirements of the Party Committee of the Group Company for 2017 are: to thoroughly study and implement the spirit of the Sixth Plenary Session of the 18th CPC Central Committee and the series of important speeches by General Secretary Xi Jinping, the spirit of the Seventh Party Congress of Jinhua City, to closely revolve around the center of enterprise production, operation and reform and development, and to adhere to scientific development and cross-regional development as the first priority, in order to continue to carry out the study and education of "five stars striving for innovation" and "two learning and one doing", we should highlight the main line of comprehensively and strictly administering the party according to the rules, firmly establish the political consciousness, overall situation consciousness, core consciousness and alignment consciousness of the majority of Party members and cadres, strengthen and improve the party building work in enterprises in the spirit of reform, and strive to improve the scientific, standardized and institutionalized level of Party building work in enterprises, in order to promote the scientific development of the group company, leapfrog development and harmonious development, it provides a strong political, ideological and organizational guarantee. The working idea of the Party Committee of the Group Company in 2017 is to focus on "one center", adhere to "one concept", highlight "three key points" and do a good job in "three constructions". That is: centering on the "one center" of enterprise production, operation and reform and development, we should strive to strengthen the "one concept" of "the organic unity of the party's leadership and the improvement of corporate governance"; to "thoroughly implement the main responsibility of the party committee; continue to carry out the study and education of" two learning and one doing "; and improve the system of party building work" as the "three key points", and focus on "team building and team building
2020
07-31