Interpretation of the New Safety Production Law
Release time:
2021-08-02
The new "Safety Production Law" will come into effect on 2021 9# April 1 .
This revision of the Work Safety Law involves a total of 42 clauses, accounting for about 1/3 of the original clauses. The revised Work Safety Law strengthens the main responsibility of enterprises and at the same time increases the punishment for illegal acts. The punishment for enterprises is 170000 from the current 20 to 2000, raise to 30 ~1 .1 billion yuan, with no upper limit on daily penalty; The amount of accident fine for the main person in charge of the unit was increased from 30% ~ 80% of annual income to 40% ~ 100 .
The revision of the Safety Production Law mainly includes five aspects:The general idea of the revision of the Safety Production Law
1. to adhere to the concept of people-centered, firmly establish the concept of safety development, promote the idea of life first and safety first, and firmly adhere to the red line that development must not be at the expense of safety.
2. further implement the main responsibility of enterprise safety production, improve the safety prevention and control system, and resolutely curb the occurrence of major production safety accidents.
3. improve the implementation of safety supervision system, mechanism and responsibility system, enhance the effectiveness of supervision.
4. promote governance according to law and improve the level of the rule of law in production safety.
respects life, health and safety, highlighting the supremacy of life
2021
edition of the new safety law for the first time writes"insists on the supremacy of people and life, and puts the protection of people's life and safety in the first place " into the safety production law.
to increase the safety of production funds, materials, technology, personnel investment guarantee, improve the safety of production conditions. People's governments at all levels shall strengthen the construction of production safety infrastructure and the construction of production safety supervision capacity.Production and business units should pay attention to the physical, psychological conditions and behavior habits of employees, strengthen psychological counseling and spiritual comfort for employees, strictly implement job safety production responsibilities, and prevent accidents caused by abnormal behavior of employees.
increased the punishment for violations of the law, with the punishment intensity
"the most severe in history", for example: the accident fine is the maximum fine "20 yuan ~2000 yuan " stipulated in the 2014 edition of , increase to "30 yuan ~1 .8 billion yuan " .
Attach importance to risk management and control, try to find ways to eliminate hidden dangers of accidents; Attach importance to emergency management and emergency capacity building, and strive to eliminate and slow down accident losses, especially to avoid the loss of the right to life.
Focus on New Problems and New Risks Prevention and ResponseDeeply Drawing on the painful lessons of production safety accidents in recent years, it has made targeted regulations on new problems exposed in production safety accidents. For example, if production and business units in catering and other industries use gas, they shall install combustible gas alarm devices and ensure their normal use.
Construction units of mines, metal smelting construction projects and construction projects for the production, storage, loading and unloading of dangerous goods shall strengthen the safety management of construction projects, and shall not resell, lease, lend, affiliation or illegally transfer construction qualifications in other forms, it is not allowed to subcontract all the construction projects it has contracted to a third party or to subcontract all the construction projects it has contracted to a third party in the name of subcontracting, and it is not allowed to subcontract the projects to a unit that does not have the corresponding qualifications.
The institution responsible for safety evaluation, certification, testing, and inspection shall have the qualifications prescribed by the state, and shall be responsible for the legality and authenticity of the safety evaluation, certification, testing, and inspection results made by it. Institutions responsible for safety evaluation, certification, testing and inspection shall establish and implement a system of service disclosure and report disclosure, and shall not lease qualifications, affiliation or issue false reports.
Punishment for Illegal Acts
"# Strict in 105 History"
Punishment Amount "# Highest in 111 History" .
2021edition of the new safety law has generally increased the amount of fines for illegal acts. for accidents that are of great concern to everyone, the maximum fine stipulated in 2014 edition has been increased from .19 million yuan ~2000 .21 million yuan 118 "to " 30 .25 million yuan ~1 .7 billion yuan "; the amount of accident fines imposed on the main responsible persons of production and business operation units will be increased from 30% ~ 80% of the annual income of stipulated in the 2014 edition of to 40% ~ 100 of . punishment is more severe. For example, if the production and business operation unit fails to take measures to eliminate the hidden dangers of accidents, the "shall be ordered to make rectification first, and if it refuses to make rectification, it shall be ordered to suspend production and business for rectification and be fined " stipulated in the 2014
edition ofis revised to "shall be ordered to make rectification and be fined once found, and if it refuses to make rectification, it shall be ordered to suspend production and business for rectification, and may be fined continuously on a daily basis, refusal to rectify, to the local people's government to close the " . disciplinary penalties are even greater. We have increased the joint punishment and publicity of illegal and dishonest behaviors, increased the frequency of law enforcement, suspended project approval, raised relevant insurance rates, and banned industries or occupations, and publicized them to the public. Attaches Importance to Operation Management and Risk Control in High-risk Industries
2021New Safety Law Changes "
Hoisting" to
"Hoisting, Hot Work, Temporary Electricity " ; change "road transport unit " to "transport unit " ; Change "storage " to "storage, loading and unloading " ; change "locking and blocking " to "occupation, locking and blocking " ; Change "exit " to "exit, evacuation route " . to establish and improve the safety production responsibility system for all employees, strengthen the standardization and informatization of safety production, build a dual prevention mechanism for safety risk classification control and hidden danger investigation and management, improve the risk prevention and resolution mechanism, improve the level of safety production, and ensure safety production. adds an article "
production and business units in high-risk industries or fields that fail to take out production safety liability insurance in accordance with state regulations shall be ordered to make corrections within a time limit and be fined not less than 50,000 yuan but not more than 100,000 yuan and not more than 100,000 yuan"".
mining, metal smelting construction projects and construction projects for the production, storage, loading and unloading of dangerous goods construction units that fail to carry out safety management of construction projects in accordance with regulations shall be ordered to make corrections within a time limit and be fined less than 100,000 yuan; The above construction units that resell, rent, lend, link up or illegally transfer construction qualifications in other forms shall be ordered to suspend production and business for rectification, and the qualification certificate shall be revoked, confiscation of illegal income; If the illegal income is more than 100,000 yuan, a fine of not less than two times but not more than five times the illegal income shall be imposed. (according to the speech made by Chen Tianci, chairman of the group's board of supervisors, at the group's half-year work analysis meeting)
More information
The company's vocational skill level self-identification training began.
After preparing the handout materials and question bank for the previous stage of vocational skill grade identification training, daye peak cement company conducted the vocational skill grade identification training for the machine repair team of the manufacturing department on August 10. On August 12 and 18, the pharmaceutical company also organized two phases of vocational skill level identification training for pharmaceutical preparation workers. According to the national skill level standard, the group company is divided into four grades: grade 5/junior worker, grade 4/intermediate worker, grade 3/senior worker and grade 2/technician. According to the analysis of employee registration, since there is only one type of job for pharmaceutical preparation workers, and cement production workers include cement central controller, cement quality inspector, cement clinker calciner, cement manufacturer, cement production inspection worker and other types of jobs, the number of applicants is less than that of cement production workers. Most of the employees who signed up were identified as participating in the four levels of vocational skills. According to preliminary statistics, there are now 155 employees who have signed up for their professional skill level, including 47 pharmaceutical preparation workers and 108 cement production workers. The human resources department of the group company is stepping up efforts to organize personnel to examine the qualifications of the employees whose registration grades are identified, and then enter the Zhejiang professional ability integration platform for formal registration after passing the examination. According to the national vocational skill standards and other content, each unit carries out targeted training for employees who participate in the independent identification of vocational skill levels. The training is conducted through on-site teaching, online teaching, and learning platform question bank exercises. After the training, the group company will organize the employees who participate in the grade identification to carry out examination and assessment, and those who pass the examination will complete the grade identification and issue the skill grade certificate. It is understood that in order to ensure the quality of vocational skill level identification, after the company was approved to independently identify the vocational skill level, the human resources department of the group organized all units to compile the question bank for various types of work in combination with the actual situation of the enterprise and with reference to the national vocational skill standards and training syllabus and other materials. after classification, unification and standardization, verification and proofreading, the preparation of the question bank has been basically completed. After being submitted to the superior unit for examination and approval, the company will import the question bank on the enterprise university platform to facilitate employees to prepare for the examination. The question bank for the independent identification of vocational skills level will also be extracted from the question banks of various industries, including professional ethics, basic knowledge, safety and environmental protection knowledge, laws and regulations knowledge, professional work practice and other national vocational skills standards. Basic requirements. The examination and assessment for independent determination of vocational skill level is tentatively scheduled for mid-September.
2021
08-23
Hu Guoyun, vice mayor of Pu'er, visited the peak
On July 16, a delegation led by Hu Guoyun, vice mayor of Pu'er City, Yunnan Province, and heads of Pu'er SASAC, Industrial Park Management Committee, Investment Promotion Bureau and other departments visited the headquarters of the group company. In the exchange with Jiang Xiaomeng, Yu Jianhong and other group leaders, Hu Guoyun expressed his gratitude to Jianfeng Group on behalf of the Pu'er Municipal Party Committee and Municipal Government. He said that the investment and entrepreneurship from Jianfeng to Pu'er not only promoted the development of Pu'er's regional industrial economy, but also made outstanding contributions to the local poverty alleviation. The two sides also exchanged and discussed issues such as strengthening in-depth cooperation between the two sides.
2021
07-21
Municipal SASAC Party Committee Visited Jianfeng Old Party Member
On June 28, Huang Zunhui, a second-level researcher of the State-owned Assets Supervision and Administration Commission of Jinhua City, visited Jianfeng Group and made a special trip to visit two retired party members, Chen Bingxiang and Yin Rongfu. Among the two Jianfeng veteran party members, Chen Bingxiang has been engaged in party affairs for nearly 30 years, and Yin Rongfu has won the honor of outstanding party members in Zhejiang Province and is a representative of Jianfeng party workers and party members. On behalf of the party committee of the Municipal State-owned assets Supervision and Administration Commission, Huang Zunhui expressed condolences to the two veteran party members, thanked the older generation of party members for their contributions, and exchanged views with Jiang Xiaomeng, secretary of the party committee and chairman of the group, and Qin Xuping, member of the party committee and chairman of the trade union, and fully affirmed the development of peak in recent years and the improvement of the level of party building work.
2021
07-12
"I'll teach you a lesson." Concluded successfully.
On the afternoon of June 24, as one of the highlights of the company's 2021 safety production month series of activities, the second phase of the "I'll give you a lesson" safety training was held at the group headquarters. the management personnel, production backbones and personnel from all departments and offices of the group gathered at the scene. foreign enterprises took safety "big lessons" through video, which was more effective than the teaching. At this point, the "I'll give you a lesson" safety training has come to a successful conclusion.
2021
07-12
Glory in the Party's 50-year-old Party Member Xi Ling Commemorative Medal
On June 23, the party committee of the group company sent a special person to visit and awarded the commemorative medals of "50 years of Glory in the Party" to six veteran party members. 2021 is the 100 anniversary of the founding of the Communist Party of China. For the first time, the Party Central Committee issued the "50 Years of Glory in the Party" commemorative medal to surviving party members who have reached the 50th anniversary of the party and have always performed well. The Organization Department of the Central Committee also specially issued the "Administrative Measures for the Issuance of Commemorative Medals of" Glory in the Party for 50 Years "", which stipulates the issuance procedures, issuance methods, production, and management of commemorative medals. In the future, the "50 Years of Glory in the Party" commemorative medal will be issued as a regular task and will be issued once every year around July 1.
2021
07-12
What is the exact time of the first Congress of the Communist Party of China? Which "big" representatives boarded the red boat in South Lake? What is the connection between the 1972 Sino-US Joint Communique and Hangzhou? On the morning of June 24th, the Party Committee of the Group Company invited members of the Party History Learning and Education Group of Zhejiang Provincial Party Committee and the vice president of Zhejiang Branch of China News Service to give a special party class of "returning to the scene of party history and reappearing the moment of party history" for the party members and cadres of the Company.
2021
07-01