Production safety cannot "rely on luck"
Release time:
2021-06-22
In the enterprise, some people have a wrong understanding of safety production management. For example, safety management cannot be prevented. Even if it is done well, accidents may still occur. Accidents are inevitable, and no accidents are completely lucky. In fact, any accident can be avoided. "relying on luck" may have temporary safety, but it will never last long.
"rely on luck", easy to make safety production management a mere formality. With the idea of "relying on luck", the work of production safety is easy to be ignored. The safety inspection of the organization is not checked, the hidden dangers of the governance are not managed, the funds invested in the safety are not invested, and the employees of the training are not trained. Just go to work. Work safety is also neglected under the domination of this wrong idea, and it will be careless and careless in the work, and it is not surprising that accidents will eventually occur. Therefore, in the management of production safety must not have the idea of "relying on luck", but to work conscientiously, strictly implement the rules and regulations and operating procedures, master excellent operation skills and work skills, and effectively prevent accidents.
Safe production depends on standardized operation, excellent equipment and technology, and strict management. The cause of the accident is the unsafe behavior of people and the unsafe state of things and the defects of management. As long as the people, equipment technology and management are done well, the accident can be effectively prevented. If we regard "luck" as a life-saving straw, we are paralyzed, careless and careless about the problem of production safety, and do not take active preventive measures and strict management in terms of people, equipment, technology and management, accidents may occur only by the fluke mentality of "luck. Therefore, we must abandon the idea of "relying on luck" to grasp safety, and should take active countermeasures, carry out preventive management, strengthen on-site management, grasp every safety management link, and implement every safety responsibility and safety measures to completely prevent accidents.
The lesson of blood reminds us that accidents can be avoided, but not "by luck. When any accident occurs, there will be many minor accidents or small signs before it occurs. If attention can be paid to it, careful analysis, investigation and rectification can be carried out, it is possible to avoid accidents. For example, Kunshan dust explosion accident, before the accident, there was a small dust burning accident, and the staff also reflected the dust problem to the management. If the management can pay attention to it and take corresponding prevention and rectification measures, the explosion accident may not happen. However, these minor accidents did not attract the attention and attention of the management, resulting in 97 deaths, 163 injuries and direct economic losses of 3.51 .5 billion yuan.
Safe production is a long-term and complicated work that must be persevered. There is no room for sloppiness. The safe levee cannot have "ant nests", let alone "rely on luck". Only by being serious and responsible, putting the work of production safety into practice, and taking various measures to eliminate the hidden dangers of accidents, can the accident be eliminated in the bud; only by being down-to-earth, doing solid work, operating in strict accordance with regulations, and with a serious and responsible attitude, can we do a good job in production safety.
(from China Safety Production Network, by Sun Xiyun)
More information
The company's vocational skill level self-identification training began.
After preparing the handout materials and question bank for the previous stage of vocational skill grade identification training, daye peak cement company conducted the vocational skill grade identification training for the machine repair team of the manufacturing department on August 10. On August 12 and 18, the pharmaceutical company also organized two phases of vocational skill level identification training for pharmaceutical preparation workers. According to the national skill level standard, the group company is divided into four grades: grade 5/junior worker, grade 4/intermediate worker, grade 3/senior worker and grade 2/technician. According to the analysis of employee registration, since there is only one type of job for pharmaceutical preparation workers, and cement production workers include cement central controller, cement quality inspector, cement clinker calciner, cement manufacturer, cement production inspection worker and other types of jobs, the number of applicants is less than that of cement production workers. Most of the employees who signed up were identified as participating in the four levels of vocational skills. According to preliminary statistics, there are now 155 employees who have signed up for their professional skill level, including 47 pharmaceutical preparation workers and 108 cement production workers. The human resources department of the group company is stepping up efforts to organize personnel to examine the qualifications of the employees whose registration grades are identified, and then enter the Zhejiang professional ability integration platform for formal registration after passing the examination. According to the national vocational skill standards and other content, each unit carries out targeted training for employees who participate in the independent identification of vocational skill levels. The training is conducted through on-site teaching, online teaching, and learning platform question bank exercises. After the training, the group company will organize the employees who participate in the grade identification to carry out examination and assessment, and those who pass the examination will complete the grade identification and issue the skill grade certificate. It is understood that in order to ensure the quality of vocational skill level identification, after the company was approved to independently identify the vocational skill level, the human resources department of the group organized all units to compile the question bank for various types of work in combination with the actual situation of the enterprise and with reference to the national vocational skill standards and training syllabus and other materials. after classification, unification and standardization, verification and proofreading, the preparation of the question bank has been basically completed. After being submitted to the superior unit for examination and approval, the company will import the question bank on the enterprise university platform to facilitate employees to prepare for the examination. The question bank for the independent identification of vocational skills level will also be extracted from the question banks of various industries, including professional ethics, basic knowledge, safety and environmental protection knowledge, laws and regulations knowledge, professional work practice and other national vocational skills standards. Basic requirements. The examination and assessment for independent determination of vocational skill level is tentatively scheduled for mid-September.
2021
08-23
Hu Guoyun, vice mayor of Pu'er, visited the peak
On July 16, a delegation led by Hu Guoyun, vice mayor of Pu'er City, Yunnan Province, and heads of Pu'er SASAC, Industrial Park Management Committee, Investment Promotion Bureau and other departments visited the headquarters of the group company. In the exchange with Jiang Xiaomeng, Yu Jianhong and other group leaders, Hu Guoyun expressed his gratitude to Jianfeng Group on behalf of the Pu'er Municipal Party Committee and Municipal Government. He said that the investment and entrepreneurship from Jianfeng to Pu'er not only promoted the development of Pu'er's regional industrial economy, but also made outstanding contributions to the local poverty alleviation. The two sides also exchanged and discussed issues such as strengthening in-depth cooperation between the two sides.
2021
07-21
Municipal SASAC Party Committee Visited Jianfeng Old Party Member
On June 28, Huang Zunhui, a second-level researcher of the State-owned Assets Supervision and Administration Commission of Jinhua City, visited Jianfeng Group and made a special trip to visit two retired party members, Chen Bingxiang and Yin Rongfu. Among the two Jianfeng veteran party members, Chen Bingxiang has been engaged in party affairs for nearly 30 years, and Yin Rongfu has won the honor of outstanding party members in Zhejiang Province and is a representative of Jianfeng party workers and party members. On behalf of the party committee of the Municipal State-owned assets Supervision and Administration Commission, Huang Zunhui expressed condolences to the two veteran party members, thanked the older generation of party members for their contributions, and exchanged views with Jiang Xiaomeng, secretary of the party committee and chairman of the group, and Qin Xuping, member of the party committee and chairman of the trade union, and fully affirmed the development of peak in recent years and the improvement of the level of party building work.
2021
07-12
"I'll teach you a lesson." Concluded successfully.
On the afternoon of June 24, as one of the highlights of the company's 2021 safety production month series of activities, the second phase of the "I'll give you a lesson" safety training was held at the group headquarters. the management personnel, production backbones and personnel from all departments and offices of the group gathered at the scene. foreign enterprises took safety "big lessons" through video, which was more effective than the teaching. At this point, the "I'll give you a lesson" safety training has come to a successful conclusion.
2021
07-12
Glory in the Party's 50-year-old Party Member Xi Ling Commemorative Medal
On June 23, the party committee of the group company sent a special person to visit and awarded the commemorative medals of "50 years of Glory in the Party" to six veteran party members. 2021 is the 100 anniversary of the founding of the Communist Party of China. For the first time, the Party Central Committee issued the "50 Years of Glory in the Party" commemorative medal to surviving party members who have reached the 50th anniversary of the party and have always performed well. The Organization Department of the Central Committee also specially issued the "Administrative Measures for the Issuance of Commemorative Medals of" Glory in the Party for 50 Years "", which stipulates the issuance procedures, issuance methods, production, and management of commemorative medals. In the future, the "50 Years of Glory in the Party" commemorative medal will be issued as a regular task and will be issued once every year around July 1.
2021
07-12
What is the exact time of the first Congress of the Communist Party of China? Which "big" representatives boarded the red boat in South Lake? What is the connection between the 1972 Sino-US Joint Communique and Hangzhou? On the morning of June 24th, the Party Committee of the Group Company invited members of the Party History Learning and Education Group of Zhejiang Provincial Party Committee and the vice president of Zhejiang Branch of China News Service to give a special party class of "returning to the scene of party history and reappearing the moment of party history" for the party members and cadres of the Company.
2021
07-01
Contact Us
No. 88 Wujiang East Road, Jinhua City, Zhejiang Province, China
Tel: +86-579-82326868
Fax : +86-579-82324666
©2023 Zhejiang Jianfeng Group Co., Ltd. Powered by: www.300.cn SEO Business License
SAF Coolest v1.2 设置面板 SHJSS-AHDB-FSSQE-ZSW
无数据提示
Sorry, the current column has no content !
You can view other columns or return to Home Page