Yunnan Jianfeng strengthens daily safety management
Release time:
2021-05-06
In order to further supervise and standardize the on-site safety management, Yunnan Jianfeng organized personnel to carry out special inspection of safety tools and appliances in the power room and special inspection of flammable, explosive and pulverized coal preparation systems. The inspection team went to the power rooms of each system to check the daily management contents including the fixed placement of the safety tools and equipment rooms, whether the tools and equipment ledgers are classified and numbered uniformly, the records of entering and leaving the warehouse, and the regular inspection of tools and equipment, etc., and focused on the careful inspection of the most used safety tools and equipment in daily work. During the inspection, the staff conducted a detailed inspection and verification of the wear and tear of safety tools and instruments in each power room under the company's jurisdiction and the date of passing the test to prevent unqualified tools and instruments from flowing into the operation site. For flammable, explosive and pulverized coal preparation system areas, the inspectors are responsible and meticulous, and do not miss any dead corner, and record while checking. After the inspection, the HSE Department will summarize the inspection results and sort them out item by item to provide basis for rectification of each department.
Combined with the construction progress of the raw meal final grinding roller press renovation and the construction arrangement of the power grid line,
4# October12 , the clinker system of Yunnan Jianfeng Cement Company was stopped for overhaul. In order to ensure the safety of maintenance and technical renovation construction, on the afternoon of 4 10 , Yunnan peak organized training on the safety control implementation plan for clinker system equipment, electrical and process maintenance, focusing on the implementation of safety and environmental protection work requirements and relevant measures in this maintenance. the safety and environment department arranged on-site safety control measures and on-site supervision organization actions, the security team explained the maintenance work content and the corresponding safety control implementation plan one by one, so that the employees have a full understanding. At the same time, in view of the recent situation that there are many outsourcing workers for equipment maintenance and renovation, on January 22, 23, Yunnan Peak organized the on-site leaders of outsourcing units to learn safety knowledge. Tan Guojian, deputy general manager of Yunnan Jianfeng, analyzed the reasons for the current safety irregularities, and required the person in charge of on-site construction safety to do a good job of publicity and education, everyone to participate in the work risk assessment, and the management personnel to supervise and manage the assessment in a timely and effective manner. Eliminate the negative attitude of employees who are afraid of trouble and try to save trouble, and require everyone to take small things as big things and attract enough attention to avoid potential safety hazards, ensure that there is no accident on the maintenance and technical renovation site.
The quality of lubricating oil has always been one of the difficulties in equipment management. After long-term use, the color, density, viscosity, water content and mechanical impurity content of the oil will change. If these indicators exceed a certain threshold, the performance will be greatly reduced, which will cause hidden dangers to the safe operation of the equipment. At present, the waste heat power generation system turbine lubricating oil has been used continuously for 7 years. Originally, the basis for judging the replacement of lubricating oil for most equipment in Yunnan Peak was based on experience or the period provided by suppliers. Due to differences in operating conditions and environment, the judgment results often had large deviations, either causing waste if the equipment was replaced earlier, or bringing hidden dangers to the safe operation of the equipment if the equipment was replaced later. In particular, large-scale dilute oil stations have the characteristics of being responsible for more lubrication points and more oil volume, and this contradiction is particularly prominent. To this end, Yunnan Peak specially commissioned a professional third-party testing agency to test the turbine lubricating oil of the waste heat power generation system. This not only provides decision-making basis for equipment management personnel to carry out lubrication management and maintenance, avoid serious lubrication failure and mechanical failure, but also avoids the increase of operating cost caused by premature replacement. (Liu Fengbin
nd Floor Xu XinChen Shiye)
More information
The company's vocational skill level independently identifies two new occupations
A few days ago, after the examination and approval of the Jinhua Municipal Bureau of Human Resources and Social Security, and reported to the Provincial Department of Human Resources and Social Security for examination and filing, Jianfeng Group's independent identification level of vocational skills was based on last year. Two new occupations (types of work) are chemical inspectors and organic synthesis workers.
2022
05-20
On May 12, Cai Xiaochun, deputy secretary of the Party group of Zhejiang Federation of industry and commerce, and his party visited Jianfeng group for investigation, visited Jinxi factory area of Jianfeng pharmaceutical factory and Jinxi internationalization project site, and had a discussion with Jiang Xiaomeng, chairman of the group company, Huang Jinlong, deputy general manager of the group company and general manager of the pharmaceutical company.
2022
05-20
On the afternoon of April 6, Jiang Xiaomeng, chairman of the group company, was invited to participate in the Jinhua News Client Financial Media Interview column "Night Talk of the Two Sessions", as a representative of the Jinhua Municipal People's Congress, to talk about suggestions for the future development of Jinhua enterprises. As the chairman of the Jinhua City Federation of Industry and Commerce, Jiang Xiaomeng has a personal experience of various problems encountered in the development of Jinhua enterprises. After careful investigation and full preparation, he put forward two proposals on strengthening the empowerment and allocation of production factors and further enhancing the market competitiveness of enterprises in our city and further promoting the compliance construction of private enterprises in our city and reducing the risk of enterprise operation. In the "two sessions night talk" interview, he put forward his own views on these two topics.
2022
04-12
Group Companies Commend 2021 Advanced
On the morning of January 26, the group company held the 2021 annual summary commendation meeting to review the work of the previous year, make arrangements for the work of 2022, sign the 2022 economic responsibility system with various professional companies and directly affiliated enterprises, and solemnly commend the 2021 advanced collectives and individuals.
2022
02-08
Group Company Convenes Workers' Representative and Trade Union Member Representative Conference
The group company held a representative meeting of staff representatives and trade union members, elected members of the eighth trade union committee and members of various special committees, and Shi Fu was elected chairman of the eighth trade union of the group trade union.
2022
02-08
The group company held an annual safety and environmental protection work conference to comprehensively summarize and review the safety and environmental protection work in 2021, make arrangements for the safety and environmental protection work in 2022, and sign the safety and environmental protection work responsibility system.
2022
02-08