Innovation is for the better development of enterprises
Release time:
2021-04-01
Huang Ping Jianfeng 2020 Innovation Expert Huang Ping Jianfeng Cement Company Manufacturing Department in Wang Yang
I entered the company in 2019 8 to participate in the preparation, mainly responsible for the information work. 2020 was the year my work gradually got on track. After the equipment debugging started, I started to design and arrange the factory network. Considering the continuity and stability required by logistics delivery, I added 2 ring lines to the original design to ensure that the network can be switched quickly to ensure the stability of delivery when a single line is broken, and the network is divided into office external network and internal internal network by marking Vlan , ensure the stability of the logistics system computer. At the same time, the intercommunication between the internal and external networks meets the needs of operation and maintenance and docking, and lays a solid foundation for the subsequent system implementation.
Later, UFIDA implementers entered the factory. My main job was to do a good job in docking the system requirements and assist them in implementing them together. As there are too many manufacturers involved in the whole packaging system, the logic of the whole packaging system is very chaotic, and it is not clear who will lead it, which seriously affects the efficiency of delivery and the control of product flow in our factory. With the help of the leaders, I learned about the implementation cases of other cement plants, found a reliable implementation unit to complete the integration of the bagging control system, and through the system logic designed by myself, I reduced the system that should be aimed at 5 lanes to the system aimed at 3 packaging machines, thus reducing the hardware cost and finally successfully going online before the agreed date, the current use effect is good, effectively improve the efficiency of shipping. However, the MES system is still a little backward, which is also the focus of my work in 2021 , and I will strive to go online as soon as possible to serve everyone.
Of course, it does not mean that only those who engage in informatization and network are innovative. We can also innovate in production and in life. A new way of ingredients, technological transformation, small inventions and small creations in production can all be innovated. If we record these innovations and declare them as our own, this is a patent. Like Yang Shuijing and Yang Sen in our large inspection team, I often see them sending out some small inventions made by themselves using the things on the spot in the group. The results are very good. These are all innovations. Including the bag control system logic I mentioned earlier, these can be patented. We should not think that patents are far away from us. They are all made by scientists and researchers. In fact, the state has attached great importance to the protection of patents and intellectual property rights. As long as you have this idea, I believe the company will give its full support and help you understand how to apply. It is not that you cannot apply, but that you dare not apply. Our brother unit Daye Peak has applied for dozens of patents this year. We have had a hard time debugging and trial production this year. Next year, our young team should learn from them. I will take the lead here and I will definitely apply for a patent for the company next year. Of course, patents are not the purpose of innovation. The purpose of innovation is to realize self-value, for the better development of the company, and I hope everyone can actively innovate.
(based on Wang yang's speech at the Huang ping peak summary commendation meeting)
More information
The company's vocational skill level self-identification training began.
After preparing the handout materials and question bank for the previous stage of vocational skill grade identification training, daye peak cement company conducted the vocational skill grade identification training for the machine repair team of the manufacturing department on August 10. On August 12 and 18, the pharmaceutical company also organized two phases of vocational skill level identification training for pharmaceutical preparation workers. According to the national skill level standard, the group company is divided into four grades: grade 5/junior worker, grade 4/intermediate worker, grade 3/senior worker and grade 2/technician. According to the analysis of employee registration, since there is only one type of job for pharmaceutical preparation workers, and cement production workers include cement central controller, cement quality inspector, cement clinker calciner, cement manufacturer, cement production inspection worker and other types of jobs, the number of applicants is less than that of cement production workers. Most of the employees who signed up were identified as participating in the four levels of vocational skills. According to preliminary statistics, there are now 155 employees who have signed up for their professional skill level, including 47 pharmaceutical preparation workers and 108 cement production workers. The human resources department of the group company is stepping up efforts to organize personnel to examine the qualifications of the employees whose registration grades are identified, and then enter the Zhejiang professional ability integration platform for formal registration after passing the examination. According to the national vocational skill standards and other content, each unit carries out targeted training for employees who participate in the independent identification of vocational skill levels. The training is conducted through on-site teaching, online teaching, and learning platform question bank exercises. After the training, the group company will organize the employees who participate in the grade identification to carry out examination and assessment, and those who pass the examination will complete the grade identification and issue the skill grade certificate. It is understood that in order to ensure the quality of vocational skill level identification, after the company was approved to independently identify the vocational skill level, the human resources department of the group organized all units to compile the question bank for various types of work in combination with the actual situation of the enterprise and with reference to the national vocational skill standards and training syllabus and other materials. after classification, unification and standardization, verification and proofreading, the preparation of the question bank has been basically completed. After being submitted to the superior unit for examination and approval, the company will import the question bank on the enterprise university platform to facilitate employees to prepare for the examination. The question bank for the independent identification of vocational skills level will also be extracted from the question banks of various industries, including professional ethics, basic knowledge, safety and environmental protection knowledge, laws and regulations knowledge, professional work practice and other national vocational skills standards. Basic requirements. The examination and assessment for independent determination of vocational skill level is tentatively scheduled for mid-September.
2021
08-23
Hu Guoyun, vice mayor of Pu'er, visited the peak
On July 16, a delegation led by Hu Guoyun, vice mayor of Pu'er City, Yunnan Province, and heads of Pu'er SASAC, Industrial Park Management Committee, Investment Promotion Bureau and other departments visited the headquarters of the group company. In the exchange with Jiang Xiaomeng, Yu Jianhong and other group leaders, Hu Guoyun expressed his gratitude to Jianfeng Group on behalf of the Pu'er Municipal Party Committee and Municipal Government. He said that the investment and entrepreneurship from Jianfeng to Pu'er not only promoted the development of Pu'er's regional industrial economy, but also made outstanding contributions to the local poverty alleviation. The two sides also exchanged and discussed issues such as strengthening in-depth cooperation between the two sides.
2021
07-21
Municipal SASAC Party Committee Visited Jianfeng Old Party Member
On June 28, Huang Zunhui, a second-level researcher of the State-owned Assets Supervision and Administration Commission of Jinhua City, visited Jianfeng Group and made a special trip to visit two retired party members, Chen Bingxiang and Yin Rongfu. Among the two Jianfeng veteran party members, Chen Bingxiang has been engaged in party affairs for nearly 30 years, and Yin Rongfu has won the honor of outstanding party members in Zhejiang Province and is a representative of Jianfeng party workers and party members. On behalf of the party committee of the Municipal State-owned assets Supervision and Administration Commission, Huang Zunhui expressed condolences to the two veteran party members, thanked the older generation of party members for their contributions, and exchanged views with Jiang Xiaomeng, secretary of the party committee and chairman of the group, and Qin Xuping, member of the party committee and chairman of the trade union, and fully affirmed the development of peak in recent years and the improvement of the level of party building work.
2021
07-12
"I'll teach you a lesson." Concluded successfully.
On the afternoon of June 24, as one of the highlights of the company's 2021 safety production month series of activities, the second phase of the "I'll give you a lesson" safety training was held at the group headquarters. the management personnel, production backbones and personnel from all departments and offices of the group gathered at the scene. foreign enterprises took safety "big lessons" through video, which was more effective than the teaching. At this point, the "I'll give you a lesson" safety training has come to a successful conclusion.
2021
07-12
Glory in the Party's 50-year-old Party Member Xi Ling Commemorative Medal
On June 23, the party committee of the group company sent a special person to visit and awarded the commemorative medals of "50 years of Glory in the Party" to six veteran party members. 2021 is the 100 anniversary of the founding of the Communist Party of China. For the first time, the Party Central Committee issued the "50 Years of Glory in the Party" commemorative medal to surviving party members who have reached the 50th anniversary of the party and have always performed well. The Organization Department of the Central Committee also specially issued the "Administrative Measures for the Issuance of Commemorative Medals of" Glory in the Party for 50 Years "", which stipulates the issuance procedures, issuance methods, production, and management of commemorative medals. In the future, the "50 Years of Glory in the Party" commemorative medal will be issued as a regular task and will be issued once every year around July 1.
2021
07-12
What is the exact time of the first Congress of the Communist Party of China? Which "big" representatives boarded the red boat in South Lake? What is the connection between the 1972 Sino-US Joint Communique and Hangzhou? On the morning of June 24th, the Party Committee of the Group Company invited members of the Party History Learning and Education Group of Zhejiang Provincial Party Committee and the vice president of Zhejiang Branch of China News Service to give a special party class of "returning to the scene of party history and reappearing the moment of party history" for the party members and cadres of the Company.
2021
07-01