News Center

Home page

Peak Report

News reports

Daily accumulation is the cornerstone of paving the road to success

Release time:

2021-03-12

Pharmaceutical Company 2020 Outstanding Scientific and Technological Worker Pharmaceutical Company Product Development Department Liu Yang

I have been engaged in the research and development of bulk drugs since I entered the company in 2013 . I cherish the title of "Tech Worker " , because to have technology is to have the power of innovation, to create unlimited possibilities. Therefore, as workers in the pharmaceutical industry, we must have a pattern that is in line with the domestic first-class pharmaceutical companies, and we must also dare to establish the ideal of catching up with the world's advanced level of medicine. We have the responsibility and ability to make technological breakthroughs become an important force in the development of our enterprises. After so many years of research and development work, I know very well that the nature of scientific and technological work requires the accumulation of a lot of basic work, repeated verification and attention to details, and finally qualitative changes can be caused by quantity.

Looking back on the past year, it was full and full of difficulties and challenges. Last year, it was notified in January 19 that the National Evaluation Center would conduct on-site verification of the esomeprazole sodium project we declared in February 21 4 . However, the process of raw materials has not been verified on the modified equipment. It only took more than 3 months and the Spring Festival holiday in the middle. We only had the chance to find problems in production in batch 1 trial production. We used batch 2 to verify the feasibility of the production plan. Batch 4 as the on-site dynamic verification batch must be safe. During the trial production, there were many problems, such as excessive impurities in the products and blocking materials during the preparation of intermediates. It can be said that the operation of the trial production process was not smooth, and the quality of the products obtained was not good. As soon as the trial production is over, we will summarize all the problems in time and analyze the reasons step by step. For example, the impurity exceeding the standard is due to the key process of the project: the reaction conditions required for oxidation reaction are relatively harsh, and the new equipment in the workshop cannot do experiments like in the laboratory, and the temperature control and feeding are very accurate. While we were discussing how to increase the ability of equipment control through small improvements, we were thinking hard about other countermeasures, and the on-site operator said: "This side of the fine process is simply not suitable for large-scale production! " This sentence made me suddenly realize that I used to think that the more detailed and accurate the process, the better, but now it seems to be a misunderstanding. Because if the operating parameters of a process are very accurate, every production should be more careful, which will undoubtedly increase the risk of production failure. However, if the parameters of the process are in a very wide range, the operator can ensure the product quality as long as he follows the relevant procedures and does not need very fine operation. Of course, the process with wide parameters is better. Therefore, with this idea in mind, I came back to consult the literature, read the summary of previous experiments, analyzed the reaction conditions of the oxidation process one by one, and proved my idea through 10 batch of small-scale experiments. After that, the conditions for the oxidation reaction were appropriately relaxed, and at the same time, with the improvement of equipment, in the following batches of production, the key process was basically stable, impurities were controllable, and the reaction law was clear.

In addition, the problem of intermediate blocking the pipeline occurred during the trial production, which not only affected the quality and yield of the product, but also increased the difficulty of the production operation. A simple crystallization rejection and filtration process can be completed in normal

2 hours, and our trial production took more than 8 hours. This intermediate itself is easy to agglomerate quickly. We have many methods to deal with agglomeration in the laboratory trial production process, but it is completely impossible to enlarge the production. If this difficult problem is not solved, the on-site verification will definitely fail. In the face of this problem, I pondered hard for a few days. The experimental phenomena that I had done before kept flashing in my mind. It suddenly occurred to me that this intermediate had a very short forming period when it was separated out. The key to solving the agglomeration lies in this short forming period. It hasn't come out earlier, and it has already formed hard lumps if it is later, so when I do this step of production, I will keep a close eye on the forming time. As soon as the forming period arrives, I will immediately increase the stirring speed and cooperate with the impact of the air flow to prevent the material from forming hard lumps. Finally, after 2 batch production attempts, the problem was successfully solved and the production cycle was greatly shortened.

Through the concerted efforts of various departments, esomeprazole sodium successfully passed the on-site dynamic inspection in

4 and the compliance inspection of GMP in 11 , and successfully obtained the production license. In addition to the esomeprazole sodium project, last year I also did a lot of work for the verification of imatinib mesylate application, which ensured the smooth progress of the verification production now.

shared so much, I think as a scientific and technological worker, we should not only have lofty ideals and firm confidence, but also pay attention to basic work, be patient and not let go of details. Ideal and confidence are like road signs, and the accumulation of daily work is the cornerstone of paving the road to success. The two complement each other and are indispensable. Only in this way can we truly achieve

"to set up a peak ambition and make a high-quality medicine " , turn our work into an important part of promoting the development of the company and grow together with the enterprise.

(according to Liu Yang's speech at the summary commendation meeting of the pharmaceutical company)

More information

Jianfeng International Trade Selected as Pilot Enterprise of Non-car Carrier Logistics

In August, Jianfeng International Trading Company successfully passed the evaluation of traffic management departments and expert groups in Zhejiang Province and Jinhua City, and was successfully selected as a pilot enterprise of car-free carrier logistics in Zhejiang Province in 2019. "Car-free transportation" is a new format in the logistics industry brought about by the widespread application of information Internet technology. The "car-free carrier" signs a transportation contract with the shipper as a carrier, assumes the responsibilities and obligations of the carrier, and entrusts the actual carrier to complete the transportation task. Road freight operators. Compared with the traditional concept of logistics mode, car free carrier has the characteristics of strong resource integration ability, wide brand effect and obvious network effect. It is of great significance to promote the intensive integration of resources and the standardized development of the freight market by using Internet means and organizational mode innovation, which is of great significance to promote the transformation and upgrading of the logistics freight industry and improve the quality and efficiency. The planning and construction objectives of the "car-free carrier" platform envisaged by Jianfeng International Trade are: based on the influence of the peak region and the advantages of integrating qualification resources, changing the competition mode, expanding the market coverage and profit pattern, and realizing the transformation and upgrading of traditional businesses, I .e. realizing the "five" operations of PDCA closed-loop operation of supply chain system and marketing marketization, coordination of transportation capacity, customization of services, platform datalization and de-intermediation, we will continue to promote the regional logistics market from low, small, scattered and empty to resource sharing, value sharing and win-win cooperation, and finally build an integrated supply chain service system of "logistics Internet post-market finance. The relevant person in charge of the peak international trade said that the "car-free carrier" pilot qualification, for the peak international trade to change the business model, improve the quality of service.

2020

07-31

Peak International Trade Won Cotton Yarn Delivery Warehouse Qualification

On August 2, Zhengzhou Commodity Exchange issued "on the establishment of a new designated cotton yarn delivery warehouse and the announcement of the water", the peak international trading company officially obtained the Zheng Shang designated delivery warehouse qualification. According to the amendment to the cotton yarn futures business rules announced by Zheng Shang in March, the social warehouse delivery method will be introduced on the basis of retaining the original factory warehouse delivery, and will take the lead in implementing it in Shandong, Henan, Jiangsu and Zhejiang. As one of the eight new warehouse delivery units after the amendment is issued, Jianfeng International Trade can carry out cotton yarn futures delivery business from September 2019. Lanxi City, a subsidiary of Jinhua, is a "famous weaving city in China" and a national textile industry base. It has more than 1000 textile enterprises and an annual demand for cotton yarn of more than 1 million tons. After Jianfeng International Trade obtains the qualification for cotton yarn futures delivery, it can not only provide cotton yarn futures delivery sites for Lanxi cotton textile industry and upstream and downstream merchants, but also effectively serve Jinhua counties and cities, Xiaoshan, Shaoxing, Quzhou, Wenzhou and other places, and other provinces, and Fujian provinces. Since Jianfeng International Trade became a futures delivery warehouse in 2009, it has carried out four types of business of Dalian Commodity Exchange PVC, PE, PP and plywood. Cotton yarn delivery is the company's first business variety in Zhengzhou Commodity Exchange. At present, Jianfeng International Trade is actively organizing learning and training on cotton yarn business knowledge, actively expanding business channels, and understanding the actual needs of upstream and downstream industries to ensure the operation, service quality and delivery efficiency of this new business. (Huang Zhiyu)

2020

07-31

Peak International Trade Won Cotton Yarn Delivery Warehouse Qualification

2020

07-30

Peak International Trade Won Cotton Yarn Delivery Warehouse Qualification

2020

07-31

Peak International Trade Won Cotton Yarn Delivery Warehouse Qualification

2020

07-22

Peak Pharmaceuticals Ranked "Top 100 Chinese Drugs"

From July 15 to 18, the National Pharmacy Week and China Pharmaceutical Innovation and Development Conference was held in Jinan, Shandong Province. The conference released the "2018 China Pharmaceutical Industry Top 100 Series List". Zhejiang Jianfeng Pharmaceutical Co., Ltd. ranked 74th in the "TOP100 List of Chinese Pharmaceutical Enterprises. The "2018 Top 100 Series List of Chinese Pharmaceutical Industry" is divided into five sub-lists: "TOP100 List of Chinese Pharmaceutical Enterprises", "TOP100 List of Chinese Traditional Medicine Enterprises", "TOP20 List of Chinese CRO (including CDMO) Enterprises", "TOP20 List of Chinese Medical Devices (including IVD) Enterprises" and "TOP20 List of Chinese Biomedicine (including Blood Products, Vaccines, Insulin, etc.) Enterprises. The "chemical pharmaceutical enterprise" in the "TOP100 list of Chinese pharmaceutical enterprises" refers to the enterprises whose terminal sales of chemical drugs account for more than 51% of the total terminal income of the enterprises. The selection score consists of two parts, one is the innovation driving force of the enterprise, that is, the R & D comprehensive index score of R & D investment in 2018, accounting for 40% of the weight; The second is the professional promotion power of the enterprise, that is, the terminal quantitative data determined by the final selection needs of clinicians and patients in 2018, accounting for 60% of the weight; the objects participating in the selection are pharmaceutical industry enterprises registered in China (excluding subsidiaries of multinational pharmaceutical enterprises in China) and whose main business is pharmaceutical manufacturing. The convening of the conference and the release of the list have received widespread attention from the industry. Relevant leaders of the state and Shandong Province attended the meeting, chief scientist of Peak Pharmaceutical, Chinese Academy of Engineering

2020

07-31

< 1...29 30 31...61 > 跳转到页