Daily accumulation is the cornerstone of paving the road to success
Release time:
2021-03-12
Pharmaceutical Company 2020 Outstanding Scientific and Technological Worker Pharmaceutical Company Product Development Department Liu Yang
I have been engaged in the research and development of bulk drugs since I entered the company in 2013 . I cherish the title of "Tech Worker " , because to have technology is to have the power of innovation, to create unlimited possibilities. Therefore, as workers in the pharmaceutical industry, we must have a pattern that is in line with the domestic first-class pharmaceutical companies, and we must also dare to establish the ideal of catching up with the world's advanced level of medicine. We have the responsibility and ability to make technological breakthroughs become an important force in the development of our enterprises. After so many years of research and development work, I know very well that the nature of scientific and technological work requires the accumulation of a lot of basic work, repeated verification and attention to details, and finally qualitative changes can be caused by quantity.
Looking back on the past year, it was full and full of difficulties and challenges. Last year, it was notified in January 19 that the National Evaluation Center would conduct on-site verification of the esomeprazole sodium project we declared in February 21 4 . However, the process of raw materials has not been verified on the modified equipment. It only took more than 3 months and the Spring Festival holiday in the middle. We only had the chance to find problems in production in batch 1 trial production. We used batch 2 to verify the feasibility of the production plan. Batch 4 as the on-site dynamic verification batch must be safe. During the trial production, there were many problems, such as excessive impurities in the products and blocking materials during the preparation of intermediates. It can be said that the operation of the trial production process was not smooth, and the quality of the products obtained was not good. As soon as the trial production is over, we will summarize all the problems in time and analyze the reasons step by step. For example, the impurity exceeding the standard is due to the key process of the project: the reaction conditions required for oxidation reaction are relatively harsh, and the new equipment in the workshop cannot do experiments like in the laboratory, and the temperature control and feeding are very accurate. While we were discussing how to increase the ability of equipment control through small improvements, we were thinking hard about other countermeasures, and the on-site operator said: "This side of the fine process is simply not suitable for large-scale production! " This sentence made me suddenly realize that I used to think that the more detailed and accurate the process, the better, but now it seems to be a misunderstanding. Because if the operating parameters of a process are very accurate, every production should be more careful, which will undoubtedly increase the risk of production failure. However, if the parameters of the process are in a very wide range, the operator can ensure the product quality as long as he follows the relevant procedures and does not need very fine operation. Of course, the process with wide parameters is better. Therefore, with this idea in mind, I came back to consult the literature, read the summary of previous experiments, analyzed the reaction conditions of the oxidation process one by one, and proved my idea through 10 batch of small-scale experiments. After that, the conditions for the oxidation reaction were appropriately relaxed, and at the same time, with the improvement of equipment, in the following batches of production, the key process was basically stable, impurities were controllable, and the reaction law was clear.
In addition, the problem of intermediate blocking the pipeline occurred during the trial production, which not only affected the quality and yield of the product, but also increased the difficulty of the production operation. A simple crystallization rejection and filtration process can be completed in normal2 hours, and our trial production took more than 8 hours. This intermediate itself is easy to agglomerate quickly. We have many methods to deal with agglomeration in the laboratory trial production process, but it is completely impossible to enlarge the production. If this difficult problem is not solved, the on-site verification will definitely fail. In the face of this problem, I pondered hard for a few days. The experimental phenomena that I had done before kept flashing in my mind. It suddenly occurred to me that this intermediate had a very short forming period when it was separated out. The key to solving the agglomeration lies in this short forming period. It hasn't come out earlier, and it has already formed hard lumps if it is later, so when I do this step of production, I will keep a close eye on the forming time. As soon as the forming period arrives, I will immediately increase the stirring speed and cooperate with the impact of the air flow to prevent the material from forming hard lumps. Finally, after 2 batch production attempts, the problem was successfully solved and the production cycle was greatly shortened.
Through the concerted efforts of various departments, esomeprazole sodium successfully passed the on-site dynamic inspection in4 and the compliance inspection of GMP in 11 , and successfully obtained the production license. In addition to the esomeprazole sodium project, last year I also did a lot of work for the verification of imatinib mesylate application, which ensured the smooth progress of the verification production now.
shared so much, I think as a scientific and technological worker, we should not only have lofty ideals and firm confidence, but also pay attention to basic work, be patient and not let go of details. Ideal and confidence are like road signs, and the accumulation of daily work is the cornerstone of paving the road to success. The two complement each other and are indispensable. Only in this way can we truly achieve"to set up a peak ambition and make a high-quality medicine " , turn our work into an important part of promoting the development of the company and grow together with the enterprise.
(according to Liu Yang's speech at the summary commendation meeting of the pharmaceutical company)
More information
The company's vocational skill level independently identifies two new occupations
A few days ago, after the examination and approval of the Jinhua Municipal Bureau of Human Resources and Social Security, and reported to the Provincial Department of Human Resources and Social Security for examination and filing, Jianfeng Group's independent identification level of vocational skills was based on last year. Two new occupations (types of work) are chemical inspectors and organic synthesis workers.
2022
05-20
On May 12, Cai Xiaochun, deputy secretary of the Party group of Zhejiang Federation of industry and commerce, and his party visited Jianfeng group for investigation, visited Jinxi factory area of Jianfeng pharmaceutical factory and Jinxi internationalization project site, and had a discussion with Jiang Xiaomeng, chairman of the group company, Huang Jinlong, deputy general manager of the group company and general manager of the pharmaceutical company.
2022
05-20
On the afternoon of April 6, Jiang Xiaomeng, chairman of the group company, was invited to participate in the Jinhua News Client Financial Media Interview column "Night Talk of the Two Sessions", as a representative of the Jinhua Municipal People's Congress, to talk about suggestions for the future development of Jinhua enterprises. As the chairman of the Jinhua City Federation of Industry and Commerce, Jiang Xiaomeng has a personal experience of various problems encountered in the development of Jinhua enterprises. After careful investigation and full preparation, he put forward two proposals on strengthening the empowerment and allocation of production factors and further enhancing the market competitiveness of enterprises in our city and further promoting the compliance construction of private enterprises in our city and reducing the risk of enterprise operation. In the "two sessions night talk" interview, he put forward his own views on these two topics.
2022
04-12
Group Companies Commend 2021 Advanced
On the morning of January 26, the group company held the 2021 annual summary commendation meeting to review the work of the previous year, make arrangements for the work of 2022, sign the 2022 economic responsibility system with various professional companies and directly affiliated enterprises, and solemnly commend the 2021 advanced collectives and individuals.
2022
02-08
Group Company Convenes Workers' Representative and Trade Union Member Representative Conference
The group company held a representative meeting of staff representatives and trade union members, elected members of the eighth trade union committee and members of various special committees, and Shi Fu was elected chairman of the eighth trade union of the group trade union.
2022
02-08
The group company held an annual safety and environmental protection work conference to comprehensively summarize and review the safety and environmental protection work in 2021, make arrangements for the safety and environmental protection work in 2022, and sign the safety and environmental protection work responsibility system.
2022
02-08
Contact Us
No. 88 Wujiang East Road, Jinhua City, Zhejiang Province, China
Tel: +86-579-82326868
Fax : +86-579-82324666
©2023 Zhejiang Jianfeng Group Co., Ltd. Powered by: www.300.cn SEO Business License
SAF Coolest v1.2 设置面板 SHJSS-AHDB-FSSQE-ZSW
无数据提示
Sorry, the current column has no content !
You can view other columns or return to Home Page