Function of Air Switch Interlock in Equipment Operation
Release time:
2020-12-01
air switch interlock in equipment operation
air switch is a very important component in low-voltage distribution network and electric drive system. It integrates control and various protection functions. In addition to completing contact and breaking circuits, it can also protect short circuits, severe overload and undervoltage of circuits or electrical equipment. At the same time, if we make a reasonable combination of interlocking, we can also protect the equipment and system from the lack of phase, misdivision and leakage of the air switch in operation. In
operation, the protection of the motor by the phase-missing interlock of the air switch
2017 , in view of the frequent burning of the motor due to the phase-missing in the packaging lane of daye peak cement company, we decided to carry out the air switch interlock after comprehensive analysis, use three 220V intermediate relays to split the three phases at the outlet end of the air switch, and then connect the three opening points in series with each other and then in series to the control loop, the loading lane after interlocking has not burned the motor due to lack of phase so far. Protection of Equipment and System by Misdividing Interlock of Air Switch during
Operation
In 2018 , the air switch of the main motor transformer of Daye Peak Kiln was broken due to the burning of the cooling fan, resulting in excessive temperature rise of the transformer. After analyzing the reasons, we installed a 220V intermediate relay at the outlet end of the air switch of the control power supply, and then tripped the transformer to interlock and connect it to the relay closing point. After interlocking, the transformer is protected in all directions. On October 28, 2020, the limestone yard stacker due to the hydraulic station air switch misdivision caused the pile back pressure dead, to find out the reason after we use the intermediate relay for combination interlocking, and then the hydraulic station comprehensive fault interlocking and connected to the relay closing point, interlocking after the stacking system for a good protection.
During operation, the leakage and interlocking of the air switch protects the equipment
2017 . Because the auxiliary transmission of the finished 3# cake hoist is of double drive structure, there is a drawer cabinet empty during power transmission, resulting in stand-alone operation. After finding out the reason, we interlocked the air switches of the two drawer cabinets with each other and connected them in series to the control circuit, so that the equipment cannot be turned on no matter which air switch is not closed, and no matter which air switch trips and the other trips at the same time. So far, the interlocking has effectively protected the equipment.
It can be seen from the above that the reasonable combination of air switch interlocking is used flexibly in the low-voltage distribution network and electric drive system to protect the equipment well, which fully reflects the importance of air switch interlocking in the operation of the equipment. (Shi Zhangliang)
More information
The company's "three" cultivation through the stage of acceptance
Since November 2015 was included in the second batch of "three" cultivation pilot enterprises in Zhejiang Province, the company has carried out a series of related work in depth. On October 19, the implementation of the company's "three" cultivation project from January 2016 to September 2017 passed the phased acceptance organized by Jinhua Economic and Information Commission and Jinhua Finance Bureau. According to the requirements of the "three" cultivation pilot enterprise responsibility letter signed with Zhejiang Province, Jinhua City and Wucheng District, as of the end of September 2017, the company has invested 16.0772 million yuan in related projects, and has achieved remarkable results in improving management, improving automation and informatization level. For example, after the digital system of quality and cost control in the plant extraction workshop of Jianfeng Health Technology Company is put into use, the whole production process can be controlled and traceable, the product quality is more stable, the production safety is effectively guaranteed, the "three wastes" emission is greatly reduced, and the product cost is reduced by 20%. The electronic label system of the pharmaceutical company automatically addresses and accurately locates the drugs in and out of the warehouse, which reduces the error rate of the out and into the warehouse, and the location management can automatically display the information such as the location and quantity of the drugs, which improves the work efficiency of the warehouse logistics and effectively reduces the management cost. The pharmaceutical company's sales management information system integrates sales management, warehouse management, customer management, statistical analysis and other modules, realizes drug sales management and control functions according to the requirements of GMP and GSP specifications, and analyzes drug regions and sales volume through big data, which will judge drug consumption trends faster and more accurately and improve the accuracy of the company's drug sales decisions. Health
2020
07-31
The company's "three" cultivation through the stage of acceptance
Since November 2015 was included in the second batch of "three" cultivation pilot enterprises in Zhejiang Province, the company has carried out a series of related work in depth. On October 19, the implementation of the company's "three" cultivation project from January 2016 to September 2017 passed the phased acceptance organized by Jinhua Economic and Information Commission and Jinhua Finance Bureau. According to the requirements of the "three" cultivation pilot enterprise responsibility letter signed with Zhejiang Province, Jinhua City and Wucheng District, as of the end of September 2017, the company has invested 16.0772 million yuan in related projects, and has achieved remarkable results in improving management, improving automation and informatization level. For example, after the digital system of quality and cost control in the plant extraction workshop of Jianfeng Health Technology Company is put into use, the whole production process can be controlled and traceable, the product quality is more stable, the production safety is effectively guaranteed, the "three wastes" emission is greatly reduced, and the product cost is reduced by 20%. The electronic label system of the pharmaceutical company automatically addresses and accurately locates the drugs in and out of the warehouse, which reduces the error rate of the out and into the warehouse, and the location management can automatically display the information such as the location and quantity of the drugs, which improves the work efficiency of the warehouse logistics and effectively reduces the management cost. The pharmaceutical company's sales management information system integrates sales management, warehouse management, customer management, statistical analysis and other modules, realizes drug sales management and control functions according to the requirements of GMP and GSP specifications, and analyzes drug regions and sales volume through big data, which will judge drug consumption trends faster and more accurately and improve the accuracy of the company's drug sales decisions. Health
2020
07-30
Yunnan Jianfeng supplies cement directly to Wa State of Myanmar
Yunnan Jianfeng Cement Company not only consolidates the original domestic market, but also gives full play to the location advantages of the three counties (Lancang, Menglian and Ximeng) close to the border to continuously expand the foreign market. Recently, the marketing department took the initiative to step out of the country from the Mangxin port in Menglian County and successfully sold "Jianfeng" brand cement to the newly planned Jinhua Xiaozunhe Island Development Zone in the Wa State of Myanmar. With the rapid development of China's economy in recent years, Myanmar has also increased the development of the China-Myanmar border area year by year. In order to attract more Chinese tourists to spend in transit, the Wa State Government of Myanmar has planned the Jinhua Xiaozunhe Island Development Zone near China's Menglian Mangxin Port. After the development zone is completed, it will mainly focus on gambling, business hotels, and border trade. There is an estimated demand for about 80000 tons of cement. When Yunnan Jianfeng marketing personnel learned of the news, they went deep into the development zone many times to understand the situation and had extensive contact with customers. With the good reputation of Jianfeng Cement in southwest Yunnan in recent years, they successfully signed a supply contract with a commercial mixing station in the development zone. At present, Yunnan Jianfeng has directly supplied 1200 tons of cement through Mangxin Port, and is expected to win 80% of the cement supply business of the development project. The initiative of "Belt and Road Initiative" to open up the international channels of South Asia and Southeast Asia has brought new development opportunities to many enterprises. This time, Yunnan Jianfeng Marketing Department went abroad to seize the opportunity, breaking the previous practice that the company mainly relied on agents for cement export, and achieved a new breakthrough in directly connecting users, which not only increased revenue, but also further expanded the radiation scope of its own marketing network, so as to further expand the scope of going abroad in the future.
2020
07-31
The company's "three" cultivation through the stage of acceptance
Since November 2015 was included in the second batch of "three" cultivation pilot enterprises in Zhejiang Province, the company has carried out a series of related work in depth. On October 19, the implementation of the company's "three" cultivation project from January 2016 to September 2017 passed the phased acceptance organized by Jinhua Economic and Information Commission and Jinhua Finance Bureau. According to the requirements of the "three" cultivation pilot enterprise responsibility letter signed with Zhejiang Province, Jinhua City and Wucheng District, as of the end of September 2017, the company has invested 16.0772 million yuan in related projects, and has achieved remarkable results in improving management, improving automation and informatization level. For example, after the digital system of quality and cost control in the plant extraction workshop of Jianfeng Health Technology Company is put into use, the whole production process can be controlled and traceable, the product quality is more stable, the production safety is effectively guaranteed, the "three wastes" emission is greatly reduced, and the product cost is reduced by 20%. The electronic label system of the pharmaceutical company automatically addresses and accurately locates the drugs in and out of the warehouse, which reduces the error rate of the out and into the warehouse, and the location management can automatically display the information such as the location and quantity of the drugs, which improves the work efficiency of the warehouse logistics and effectively reduces the management cost. The pharmaceutical company's sales management information system integrates sales management, warehouse management, customer management, statistical analysis and other modules, realizes drug sales management and control functions according to the requirements of GMP and GSP specifications, and analyzes drug regions and sales volume through big data, which will judge drug consumption trends faster and more accurately and improve the accuracy of the company's drug sales decisions. Health
2020
07-31
"We were also praised by the traffic police." On September 26, when talking about the civilized travel volunteer activities a few days ago, Li Xuegen of the big pharmacy smiled and was very happy that his work was recognized. Starting from May this year, during the rush hour on the 5th and 20th of each month (weekends and holidays are postponed), there will be a group of volunteers wearing red vests and hats, holding signs with the words "courtesy of zebra crossing, civilized crossing of the road" to divert traffic at many intersections in the city. This is a civilized travel volunteer service activity carried out by Jinhua City to further promote civilized travel and persuade uncivilized behavior. As a civilized unit at the municipal level in Jinhua, Jianfeng Group's duty junction is at the intersection of Bayi North Street and Zhongshan West Road. Before the activity was carried out, as the organizer of the group company, the group office had deep concerns. The activity took a long time and required a lot of manpower. As an enterprise, under the condition of ensuring normal production, it was completed by employees in their spare time. Can it be continued? To this end, Xiang Chongping, the leader in charge of the group company, specially organized a meeting of the directors of the subordinate enterprise offices to mobilize and deploy the matter. The group office also specially established the QQ group of "Peak Civilized Travel Volunteer Service" to release the contents and arrangements of the activities, update the duty situation, and praise the small partners on duty. At the beginning of the activity, colleagues in the headquarters building took the lead in taking up their posts. The first class was Li Hong, Li Xia, Yang Liu and Lei Yuan of the finance department of the group company. Employees of the group office, the peak health experience hall, Qiubin Factory and the international trading company also took up their posts one after another. Other enterprises also took part in an orderly manner according to the duty schedule.
2020
07-31
Daye peak again won the national inspection big contrast "all-excellent award"
A few days ago, daye peak cement co., ltd won the "all-excellent award" in the 16th national cement quality index inspection comparison of "hongchao science and technology cup" organized by the national cement quality supervision and inspection center in 2017 ". The national cement quality index inspection is held every two years. It is the highest level competition in the cement industry. It aims to understand the current quality inspection level of China's cement industry through large-scale comparison, promote various cement inspection departments to improve the inspection quality, and provide accurate data for cement production and use. The results truly reflect the overall inspection level of national cement production enterprises and provincial building materials (cement) inspection stations, it represents the highest level of inspection technology in the cement industry. Over the years, Daye Peak has firmly established the concept of "quality is the life of an enterprise", always puts product quality control in the first place, and conducts daily inspections in strict accordance with the testing items and frequency specified by national standards. actively carry out inspection comparison with provincial and municipal cement quality inspection centers, improve the professional level of inspectors through skill training, and spot check the internal passwords of inspectors every month to strictly ensure the accuracy and reliability of data, to ensure that the quality of the factory cement to meet the market and customer demand, and further enhance the core competitiveness of enterprises. Since it was officially put into production in 2008, Daye Peak has participated in the national cement quality index inspection five times, and has achieved good results. Among them, it won the "All-Excellent Award" in 2009 and the "All-Qualified" in 2011, 2013 and 2015. Unit Award ". (Yang Huiping)
2020
07-31