My Opinion on the Trend of Spike Cement to "Intelligent Building"
Release time:
2020-11-23
My Opinion on "Intelligent Manufacturing" of Peak Cement
Now we are in an era of technological explosion. The emergence of 5G, Internet of Things, big data, artificial intelligence and other technologies is both an opportunity and a challenge for the cement industry. How to transform from traditional manufacturing to modern "intelligent" manufacturing is worthy of our attention, and it is also a problem that must be faced.
Not long ago, I had the honor to participate in the China Cement Intelligent Summit Forum held in Luoyang and the cement industry intelligent factory construction training organized by the group. I felt deeply about how cement production enterprises can move from "manufacturing" to "intelligent manufacturing" "There are also some thoughts. Next, I would like to talk about some views on the "intelligent manufacturing" of cement based on our experience in information and intelligent management since the trial production of Huangping Jianfeng Cement Company.
The information framework of Guizhou Huangping Peak is shown in the figure. The three systems of ERP, MES and DCS are taken as the core, supplemented by advanced equipment such as mine belt analyzer and automatic loading machine, which form the basic framework of information technology. Among them, DCS and ERP systems have been put into use with good results and saved a lot of labor costs. The management of production data will be easier after the MES system goes online.

Figure 1 Guizhou Huangping Peak Basic Information Framework
From some phenomena in the trial production process of Guizhou Huangping Peak, I think that when further promoting the construction of information and intelligent system, we must pay attention to the following aspects:
1. The acceptance ability of grass-roots employees. Some grass-roots employees do not have a high level of computer operation, and it is difficult to get started with more complex system operations. In addition, three shifts during production make it impossible to conduct centralized training for all operators. The instruction manual alone is not enough to make them proficient in operation, thus affecting work efficiency. On the other hand, some employees think that the intelligent system will pose a threat to their work after it goes online, resulting in resistance. How to solve this problem, on the one hand, we need to organize some information training for grass-roots employees in our spare time, and we can also organize some operation competitions. On the other hand, we should let them know that intelligent informatization will only eliminate the same employees. We should follow the trend and change from the on-site operator to the operator of the information system. The information system is to facilitate the work of employees rather than to replace the work of employees.
2. Big data analytics capabilities must be further strengthened. Most of our systems in Huang Ping Peak have a high degree of automation and informatization, but their intelligence needs to be improved. Except for cross-band analyzers and expert systems that are not online, other systems cannot make automatic adjustment or advance warning and situation prediction according to production data. Most systems can only automatically collect data. As for the analysis of the data and the following decisions, it is up to the user to analyze and implement. Real intelligence should have its own big data platform, analyze production data and business data, draw corresponding conclusions, and play a guiding role in the operation of users.
3. Prevent "information silos". The "information island" of an enterprise refers to a computer application system that is developed or introduced independently, commissioned or introduced by different departments within the enterprise, which is not functionally related to each other, information is not shared and exchanged, and information is disconnected from business processes and applications. Although the data connection among DCS, MES and ERP systems under the framework of Guizhou Huangping peak informatization is good, if the data of OA system and labor management system can be integrated into ERP system, the work efficiency of employees can be further improved and the tedious problem of multi-system operation switching can be improved.
4. Cement intelligent market constraints. At present, the cement industry cannot have professional and mature intelligent business solutions like the mechanical processing and manufacturing industry, and there are also professional intelligent equipment integrators in the market, which can complete the intelligent construction of the entire production base in one stop. For the cement industry as a whole, there are few intelligent hardware and software integrators. The intelligence of the cement industry is obviously "crossing the river by feeling the stones". It relies on other intelligent means to apply mature solutions to the cement industry and uses some solutions after a series of "soil and water improvement" to meet the application of the cement industry. The trial and error cost during this period is very large. The uninterrupted production and sales of cement have great restrictions on the debugging of the system, while the imported mature integrated solutions are monopolized and the cost remains high. Most cement plants still choose intelligent solutions for a certain aspect. This will easily cause incompatibility of multiple systems and easily form "information islands", resulting in the inability to efficiently and economically meet the requirements of the intelligent development of the cement industry. Therefore, enterprises should communicate more with intelligent solution providers, and then combine their own industry experience with advanced intelligent technology, taking software and hardware as research and development objects at the same time, and taking their own enterprises as trial and error objects to form intelligent business solutions for cement enterprises, which can be extended to corresponding brother units. If so, it can greatly reduce the cost of trial and error, improve the degree of intelligence and cement industry, so as to promote the intelligent development of the cement industry of the whole group.
China Cement Intelligent Summit Forum also organized participants to visit local advanced cement enterprises. After seeing so many advanced intelligent application solutions, I think that if the technology becomes more mature in the future, the monopoly phenomenon is gradually alleviated, and the cost of the solution is greatly reduced, we can create an improvement scheme for the existing intelligent factory construction through the following aspects:
1. Intelligent monitoring: through monitoring equipment, the behaviors of employees and drivers at on-site import and export, bulk discharge outlets and dangerous operation points are detected, and warnings are issued to make certain restrictions. For example, it is impossible to enter the on-site workshop without wearing safety helmet, and it is impossible to carry out bulk feeding without wearing safety belt, etc. Reduce the occurrence of safety accidents to a certain extent. Safety is the top priority of production. At present, many drivers have uneven cultural levels and fluke mentality. Coupled with the pursuit of unmanned logistics card management, it is difficult for us to restrict the behavior of drivers. If the system strengthens their behavior Supervision can effectively reduce the occurrence of accidents and avoid adverse effects on enterprises.
2. Flow direction control: through the intelligent terminal composed of GPS and load sensor, the location and cargo status of each transport vehicle are obtained and sent to the cloud server. Managers can directly in the mobile phone or monitoring center, real-time monitoring of each vehicle is illegal flow phenomenon. This can greatly reduce the phenomenon of fleeing goods and is conducive to the maintenance of market order, but the current unit price of smart terminals is too high and it is difficult to popularize.
3. Smart Mine: Mine is the most important resource for cement production enterprises. Green mine has always been an important work target of cement enterprises under our peak. However, most of the current intelligence is aimed at the factory and insufficient attention is paid to the requirements of mine intelligence. Whether mines can effectively use resources is related to the sustainable development of enterprises. At present, 5G technology is developing rapidly. If 5G base stations are built on mines and Beidou high-precision navigation 5G high-precision maps are used, brand-new application fields such as unmanned vehicles, unmanned mining, unmanned aerial vehicle remote inspection, personnel intelligent control, etc. will be opened up, greatly reducing the risks of mining and transportation, and better meeting the requirements of green mines. However, due to the fact that most mines still choose outsourcing operation mode and the high cost of 5G Beidou's driverless solution, there is still a long way to go.
Smart is both an opportunity and a challenge. For large-scale cement companies like Jianfeng, whoever can follow the tide of the times and stand firm in the tide of "intelligent manufacturing" will occupy the commanding heights in the next round of industry competition. The road to the transformation of the cement industry to intelligence is destined to be long. How we find the characteristic intelligent solutions that belong to our own enterprises or even groups in the wave of the times is bound to be a new topic that we need to constantly explore. (Yu Wang Yang)
More information
The company's vocational skill level self-identification training began.
After preparing the handout materials and question bank for the previous stage of vocational skill grade identification training, daye peak cement company conducted the vocational skill grade identification training for the machine repair team of the manufacturing department on August 10. On August 12 and 18, the pharmaceutical company also organized two phases of vocational skill level identification training for pharmaceutical preparation workers. According to the national skill level standard, the group company is divided into four grades: grade 5/junior worker, grade 4/intermediate worker, grade 3/senior worker and grade 2/technician. According to the analysis of employee registration, since there is only one type of job for pharmaceutical preparation workers, and cement production workers include cement central controller, cement quality inspector, cement clinker calciner, cement manufacturer, cement production inspection worker and other types of jobs, the number of applicants is less than that of cement production workers. Most of the employees who signed up were identified as participating in the four levels of vocational skills. According to preliminary statistics, there are now 155 employees who have signed up for their professional skill level, including 47 pharmaceutical preparation workers and 108 cement production workers. The human resources department of the group company is stepping up efforts to organize personnel to examine the qualifications of the employees whose registration grades are identified, and then enter the Zhejiang professional ability integration platform for formal registration after passing the examination. According to the national vocational skill standards and other content, each unit carries out targeted training for employees who participate in the independent identification of vocational skill levels. The training is conducted through on-site teaching, online teaching, and learning platform question bank exercises. After the training, the group company will organize the employees who participate in the grade identification to carry out examination and assessment, and those who pass the examination will complete the grade identification and issue the skill grade certificate. It is understood that in order to ensure the quality of vocational skill level identification, after the company was approved to independently identify the vocational skill level, the human resources department of the group organized all units to compile the question bank for various types of work in combination with the actual situation of the enterprise and with reference to the national vocational skill standards and training syllabus and other materials. after classification, unification and standardization, verification and proofreading, the preparation of the question bank has been basically completed. After being submitted to the superior unit for examination and approval, the company will import the question bank on the enterprise university platform to facilitate employees to prepare for the examination. The question bank for the independent identification of vocational skills level will also be extracted from the question banks of various industries, including professional ethics, basic knowledge, safety and environmental protection knowledge, laws and regulations knowledge, professional work practice and other national vocational skills standards. Basic requirements. The examination and assessment for independent determination of vocational skill level is tentatively scheduled for mid-September.
2021
08-23
Hu Guoyun, vice mayor of Pu'er, visited the peak
On July 16, a delegation led by Hu Guoyun, vice mayor of Pu'er City, Yunnan Province, and heads of Pu'er SASAC, Industrial Park Management Committee, Investment Promotion Bureau and other departments visited the headquarters of the group company. In the exchange with Jiang Xiaomeng, Yu Jianhong and other group leaders, Hu Guoyun expressed his gratitude to Jianfeng Group on behalf of the Pu'er Municipal Party Committee and Municipal Government. He said that the investment and entrepreneurship from Jianfeng to Pu'er not only promoted the development of Pu'er's regional industrial economy, but also made outstanding contributions to the local poverty alleviation. The two sides also exchanged and discussed issues such as strengthening in-depth cooperation between the two sides.
2021
07-21
Municipal SASAC Party Committee Visited Jianfeng Old Party Member
On June 28, Huang Zunhui, a second-level researcher of the State-owned Assets Supervision and Administration Commission of Jinhua City, visited Jianfeng Group and made a special trip to visit two retired party members, Chen Bingxiang and Yin Rongfu. Among the two Jianfeng veteran party members, Chen Bingxiang has been engaged in party affairs for nearly 30 years, and Yin Rongfu has won the honor of outstanding party members in Zhejiang Province and is a representative of Jianfeng party workers and party members. On behalf of the party committee of the Municipal State-owned assets Supervision and Administration Commission, Huang Zunhui expressed condolences to the two veteran party members, thanked the older generation of party members for their contributions, and exchanged views with Jiang Xiaomeng, secretary of the party committee and chairman of the group, and Qin Xuping, member of the party committee and chairman of the trade union, and fully affirmed the development of peak in recent years and the improvement of the level of party building work.
2021
07-12
"I'll teach you a lesson." Concluded successfully.
On the afternoon of June 24, as one of the highlights of the company's 2021 safety production month series of activities, the second phase of the "I'll give you a lesson" safety training was held at the group headquarters. the management personnel, production backbones and personnel from all departments and offices of the group gathered at the scene. foreign enterprises took safety "big lessons" through video, which was more effective than the teaching. At this point, the "I'll give you a lesson" safety training has come to a successful conclusion.
2021
07-12
Glory in the Party's 50-year-old Party Member Xi Ling Commemorative Medal
On June 23, the party committee of the group company sent a special person to visit and awarded the commemorative medals of "50 years of Glory in the Party" to six veteran party members. 2021 is the 100 anniversary of the founding of the Communist Party of China. For the first time, the Party Central Committee issued the "50 Years of Glory in the Party" commemorative medal to surviving party members who have reached the 50th anniversary of the party and have always performed well. The Organization Department of the Central Committee also specially issued the "Administrative Measures for the Issuance of Commemorative Medals of" Glory in the Party for 50 Years "", which stipulates the issuance procedures, issuance methods, production, and management of commemorative medals. In the future, the "50 Years of Glory in the Party" commemorative medal will be issued as a regular task and will be issued once every year around July 1.
2021
07-12
What is the exact time of the first Congress of the Communist Party of China? Which "big" representatives boarded the red boat in South Lake? What is the connection between the 1972 Sino-US Joint Communique and Hangzhou? On the morning of June 24th, the Party Committee of the Group Company invited members of the Party History Learning and Education Group of Zhejiang Provincial Party Committee and the vice president of Zhejiang Branch of China News Service to give a special party class of "returning to the scene of party history and reappearing the moment of party history" for the party members and cadres of the Company.
2021
07-01