"Break" and "stand" between seeking progress
Release time:
2020-11-23
Seeking Progress between "Breaking" and "Standing"
The 26th issue of this year's "Peak News" published a report on Daye Peak Cement Company's strengthening of daily economic analysis. There is an interesting description in it: Daye Peak's economic analysis special meeting was carried out on the basis of the company's implementation of the regular production meeting system in 2019. The weekly production meeting carries out weekly summary, weekly arrangement and weekly adjustment, focusing on the improvement of specific work... From the comprehensive consideration of many factors, Daye Peak adjusted the regular meeting system, changed the regular production meeting to once every half month, at the same time, in the second week of each month, the final cost and profit analysis of the preliminary work was carried out comprehensively, and the "most economical" work plan of the month was put forward.
When Daye Peak began to implement the weekly meeting system last year, the "Peak News" also reported that the implementation of the system has achieved results in the exchange of work between various departments, timely discovery of problems, and exploration of solutions to problems. Quite obvious results. However, after less than a year of implementation, the system was changed from once a week to once a half month, and economic analysis meetings were added. The report is very clear: with the update and improvement of equipment, stable operation, process and technical indicators improved, production management in the short board, loopholes reduced, production meetings are more and more like "work arrangement meeting". In short, a system that used to be effective, with the passage of time and the progress of work, its effect becomes less and less obvious, and it is replaced by a new system that is more in line with the actual needs of the current situation.
From the weekly regular meeting to the semi-monthly regular meeting to the economic analysis meeting, the change of the meeting system in Daye Peak in just over a year is actually a microcosm of the innovation and development of things. Any process of reform and innovation, the development of the times, and the progress of technology are essentially a process of "breaking" and "establishing.
"Broken" is the basis of "standing. The ancients said, do not break. Any "stand" starts from the "broken. "Break" is the sublation of the old things and the breakthrough of the old framework. This kind of sublation and breakthrough is not necessarily a complete negation of the past, but more optimization and improvement on the basis of the past. With the deepening and profound understanding of the old things, we gradually discover the existing shortcomings or limitations, and then produce the idea of "dissatisfaction" and "dissatisfaction", and then we will have the desire to "break the old and establish the new. Therefore, without old experience, there is no way to produce new results. Only by standing on the shoulders of giants can it be possible to see farther and wider than giants.
"Standing" is the purpose of "breaking. The ancients also said that everything is done in advance, and nothing is done without advance. Any "stand" has a certain direction and goal. However, the direction and goal of "standing" are not arbitrary, but determined by "breaking. Only when you want to understand "what to break" can you know "what to stand". The orientation of "breaking" is the trend of "establishment"; the content of "breaking" is the goal of "establishment"; "breaking" is the means and way to achieve "establishment.
Any company has a need for development. If we want to develop, we can't draw the ground as a prison and rest on our laurels. We need to constantly innovate. And any innovative results cannot be universally applicable, let alone a "magic weapon" forever ". Even if it is a "patent", there are times when it expires, is eliminated, and is surpassed. Therefore, if our enterprises want long-term stability and long-term development, they must constantly examine themselves, deny themselves, break through themselves, regard the past "merit books" as the focus of "breaking", and constantly improve and improve, so that they can "stand" in a higher and farther place again and again. (one word)
More information
The company's vocational skill level self-identification training began.
After preparing the handout materials and question bank for the previous stage of vocational skill grade identification training, daye peak cement company conducted the vocational skill grade identification training for the machine repair team of the manufacturing department on August 10. On August 12 and 18, the pharmaceutical company also organized two phases of vocational skill level identification training for pharmaceutical preparation workers. According to the national skill level standard, the group company is divided into four grades: grade 5/junior worker, grade 4/intermediate worker, grade 3/senior worker and grade 2/technician. According to the analysis of employee registration, since there is only one type of job for pharmaceutical preparation workers, and cement production workers include cement central controller, cement quality inspector, cement clinker calciner, cement manufacturer, cement production inspection worker and other types of jobs, the number of applicants is less than that of cement production workers. Most of the employees who signed up were identified as participating in the four levels of vocational skills. According to preliminary statistics, there are now 155 employees who have signed up for their professional skill level, including 47 pharmaceutical preparation workers and 108 cement production workers. The human resources department of the group company is stepping up efforts to organize personnel to examine the qualifications of the employees whose registration grades are identified, and then enter the Zhejiang professional ability integration platform for formal registration after passing the examination. According to the national vocational skill standards and other content, each unit carries out targeted training for employees who participate in the independent identification of vocational skill levels. The training is conducted through on-site teaching, online teaching, and learning platform question bank exercises. After the training, the group company will organize the employees who participate in the grade identification to carry out examination and assessment, and those who pass the examination will complete the grade identification and issue the skill grade certificate. It is understood that in order to ensure the quality of vocational skill level identification, after the company was approved to independently identify the vocational skill level, the human resources department of the group organized all units to compile the question bank for various types of work in combination with the actual situation of the enterprise and with reference to the national vocational skill standards and training syllabus and other materials. after classification, unification and standardization, verification and proofreading, the preparation of the question bank has been basically completed. After being submitted to the superior unit for examination and approval, the company will import the question bank on the enterprise university platform to facilitate employees to prepare for the examination. The question bank for the independent identification of vocational skills level will also be extracted from the question banks of various industries, including professional ethics, basic knowledge, safety and environmental protection knowledge, laws and regulations knowledge, professional work practice and other national vocational skills standards. Basic requirements. The examination and assessment for independent determination of vocational skill level is tentatively scheduled for mid-September.
2021
08-23
Hu Guoyun, vice mayor of Pu'er, visited the peak
On July 16, a delegation led by Hu Guoyun, vice mayor of Pu'er City, Yunnan Province, and heads of Pu'er SASAC, Industrial Park Management Committee, Investment Promotion Bureau and other departments visited the headquarters of the group company. In the exchange with Jiang Xiaomeng, Yu Jianhong and other group leaders, Hu Guoyun expressed his gratitude to Jianfeng Group on behalf of the Pu'er Municipal Party Committee and Municipal Government. He said that the investment and entrepreneurship from Jianfeng to Pu'er not only promoted the development of Pu'er's regional industrial economy, but also made outstanding contributions to the local poverty alleviation. The two sides also exchanged and discussed issues such as strengthening in-depth cooperation between the two sides.
2021
07-21
Municipal SASAC Party Committee Visited Jianfeng Old Party Member
On June 28, Huang Zunhui, a second-level researcher of the State-owned Assets Supervision and Administration Commission of Jinhua City, visited Jianfeng Group and made a special trip to visit two retired party members, Chen Bingxiang and Yin Rongfu. Among the two Jianfeng veteran party members, Chen Bingxiang has been engaged in party affairs for nearly 30 years, and Yin Rongfu has won the honor of outstanding party members in Zhejiang Province and is a representative of Jianfeng party workers and party members. On behalf of the party committee of the Municipal State-owned assets Supervision and Administration Commission, Huang Zunhui expressed condolences to the two veteran party members, thanked the older generation of party members for their contributions, and exchanged views with Jiang Xiaomeng, secretary of the party committee and chairman of the group, and Qin Xuping, member of the party committee and chairman of the trade union, and fully affirmed the development of peak in recent years and the improvement of the level of party building work.
2021
07-12
"I'll teach you a lesson." Concluded successfully.
On the afternoon of June 24, as one of the highlights of the company's 2021 safety production month series of activities, the second phase of the "I'll give you a lesson" safety training was held at the group headquarters. the management personnel, production backbones and personnel from all departments and offices of the group gathered at the scene. foreign enterprises took safety "big lessons" through video, which was more effective than the teaching. At this point, the "I'll give you a lesson" safety training has come to a successful conclusion.
2021
07-12
Glory in the Party's 50-year-old Party Member Xi Ling Commemorative Medal
On June 23, the party committee of the group company sent a special person to visit and awarded the commemorative medals of "50 years of Glory in the Party" to six veteran party members. 2021 is the 100 anniversary of the founding of the Communist Party of China. For the first time, the Party Central Committee issued the "50 Years of Glory in the Party" commemorative medal to surviving party members who have reached the 50th anniversary of the party and have always performed well. The Organization Department of the Central Committee also specially issued the "Administrative Measures for the Issuance of Commemorative Medals of" Glory in the Party for 50 Years "", which stipulates the issuance procedures, issuance methods, production, and management of commemorative medals. In the future, the "50 Years of Glory in the Party" commemorative medal will be issued as a regular task and will be issued once every year around July 1.
2021
07-12
What is the exact time of the first Congress of the Communist Party of China? Which "big" representatives boarded the red boat in South Lake? What is the connection between the 1972 Sino-US Joint Communique and Hangzhou? On the morning of June 24th, the Party Committee of the Group Company invited members of the Party History Learning and Education Group of Zhejiang Provincial Party Committee and the vice president of Zhejiang Branch of China News Service to give a special party class of "returning to the scene of party history and reappearing the moment of party history" for the party members and cadres of the Company.
2021
07-01
Contact Us
No. 88 Wujiang East Road, Jinhua City, Zhejiang Province, China
Tel: +86-579-82326868
Fax : +86-579-82324666
©2023 Zhejiang Jianfeng Group Co., Ltd. Powered by: www.300.cn SEO Business License
SAF Coolest v1.2 设置面板 SHJSS-AHDB-FSSQE-ZSW
无数据提示
Sorry, the current column has no content !
You can view other columns or return to Home Page