News Center

Home page

Peak Report

News reports

The company "group" exchange safety risk management and control experience

Release time:

2020-10-09

Company "organized" to exchange safety risk control experience

News from our newspaper 9# May 24 and 25 , the group company's safety risk control work seminar was held at Daye Peak. More than ten persons in charge of production safety from the group company and its subordinate enterprises visited the site, shared their experiences, and jointly discussed the work of safety risk management and control. On the afternoon of

, while visiting Daye Peak Factory, the participants also conducted a comprehensive inspection of the production site to check hidden dangers and find problems. The seminar on

was presided over by Chen Tianci, chairman of the board of supervisors of the group company. Zhang Fengliang, deputy general manager of the group company and general manager of Daye Peak, Li Xiaoyin, safety director of the group company, and leaders and safety directors of various professional companies and directly affiliated enterprises participated in the discussion. Wu Xinqiong, deputy manager of Daye Peak Environmental Security Department, reported on the learning results of his previous trip to Lafarge, Guizhou, and introduced Daye Peak's experience and effectiveness in implementing operational risk assessment and safety performance cards. The heads of Daye Peak Manufacturing Department, Packaging System and Inspection Class respectively introduced the application experience of the "Operation Risk Assessment Form" and the employees' response to the safety performance card evaluation. After nearly half a year of operation, the employees generally responded well.

As the promoter of Lafarge's safety management model in Daye Peak, Zhang Fengliang shared Daye Peak's experience in learning advanced experience: first of all, it is necessary to change concepts, unify ideological understanding, attach importance to safety risk assessment, and establish a reward mechanism; Secondly, we should attach importance to the role of team leaders and improve the risk assessment ability and comprehensive safety quality of employees through the filling in the Operation Risk Assessment Form. To systematically do a good job of safety management, safety standardization "13 elements" as a guide to safety management. He believes that filling in the "Operation Risk Assessment Form" is not only the safety control of the operation, but also the control of the maintenance process and quality, so that safety assurance measures can be integrated with production and operation.

While exchanging experience in safety risk management and control, the safety management personnel of participating brother units also put forward suggestions for improvement on the problems existing in the on-site inspection of Daye Peak. Li Xiaoyin made a comprehensive summary and analysis of the company's safety management and accidents this year. At the

seminar, Chen Tianci affirmed the safety management effectiveness of Daye Peak, and hoped that Daye Peak would continue to work hard to further improve the safety risk assessment management system, humbly accept the opinions and suggestions put forward by brother units, and improve in future work.

In view of the company's subordinate enterprises learning and implementing safety management experience in benchmarking advanced enterprises, Chen Tianci proposed to attach importance to the "ritual sense" of safety management, formulate "Safety Instructions for Entry into the Factory", and do a good job in safety education and training for foreign personnel. Put the "Health and Safety Regulations" on the wall in a prominent position of the company so that every employee can see them frequently and alert them at all the time; it is necessary to check and fill gaps in the safety management work against the "thirteen elements" of safety management. The system is not perfect and the system is required to strengthen inspection and supervision. He asked all units to complete their respective risk assessment implementation plans between October

and 11 while learning the work experience of Daye peak safety risk assessment, and to carry out internal review and publicity, and to implement them within all enterprises before the end of 12 , making continuous efforts to achieve the safety management objectives for the whole year. (Wang Yuhua Wu Xinqiong)

More information

The Party committee of the company organized and studied the spirit of the Sixth Plenary Session of the 18th CPC Central Committee

The Sixth Plenary Session of the 18th Central Committee of the Communist Party of China was held in Beijing from October 24 to 27. It reviewed and approved the "Several Guidelines on Political Life within the Party under the New Situation" and the "Regulations on Inner-Party Supervision of the Communist Party of China. On November 22, the party committee of the group company successively held party committee and branch secretary meetings to learn the spirit of the sixth Plenary session of the 18th CPC Central Committee and put forward requirements for organizational construction and party member management. At the branch secretary meeting, Jiang Xiaomeng, secretary of the party committee of the group company, preached the main contents of "some guidelines on Inner-Party political Life under the New situation" and "regulations on Inner-Party Supervision of the Communist Party of China. He pointed out that seeking truth from facts, integrating theory with practice, keeping close ties with the masses, criticizing and self-criticism, democratic centralism, and strict party discipline are the basic norms and working principles of inner-party political life accumulated by the Communist Party of China for several generations. In the new social environment, some party members and cadres have bred some unhealthy atmosphere, which has damaged the image and interests of the party, the Sixth Plenary Session of the 18th Central Committee of the Communist Party of China proposed to strengthen and standardize the political life within the party, take the party constitution as the foundation, adhere to the party's political line, ideological line, organizational line and mass line, strive to enhance the political, contemporary, principled and fighting nature of the party's political life, and strive to enhance the party's ability of self purification, self improvement, self innovation and self improvement, Efforts should be made to improve the party's leadership and governance level, efforts should be made to safeguard the authority of the Party Central Committee, ensure the unity and unity of the party, maintain the advanced nature and purity of the party, and strive to form a centralized, democratic and disciplined party in the whole party

2020

07-31

Jinxi plant environmental protection facilities through the completion of acceptance

On November 1, Jianfeng Pharmaceutical Jinxi Pharmaceutical Factory successfully obtained the approval from Zhejiang Environmental Protection Department that the environmental protection facilities of the project passed the completion acceptance, and a key work of Jianfeng Pharmaceutical in 2016 came to an end. Jianfeng Pharmaceutical's annual output of 35 tons of cephalosporins, anti-tumor drugs and other raw material production lines and various preparation production lines technological transformation projects started construction in Jinxi Development Zone in October 2012 and were almost completed in September 2015. The construction of the project strictly abided by the "three simultaneous" system of environmental protection, conscientiously implemented the requirements in the environmental impact assessment report and its approval documents, and invested 19.34 million yuan in environmental protection facilities. The plant has basically realized the separation of clean and sewage. A new wastewater treatment system with a daily treatment capacity of 700 cubic meters and a "physical, chemical and biochemical" treatment process has been built, and an online monitoring device networked with the environmental protection department has been installed. All kinds of production wastewater, public works wastewater and domestic sewage are treated by the wastewater station and sent to Jinxi Sewage Treatment Plant for centralized treatment; there is an RTO regenerative incineration device of 10000 cubic meters per hour and a centralized treatment device of 4000 cubic meters per hour for chlorine-containing organic waste gas. All kinds of waste gas are discharged after collection and treatment. In October 2015, with the approval of Jinhua Economic and Technological Development Zone Branch of Jinhua Environmental Protection Bureau, the trial production of Jinxi project was carried out. After more than half a year of operation, in early July 2016, Zhejiang Environmental Monitoring Center Station carried out completion acceptance monitoring of environmental protection treatment facilities such as waste water and waste gas of Jinxi Pharmaceutical Factory, and issued a completion acceptance monitoring report of environmental protection facilities at the end of August.

2020

07-31

Jinxi plant environmental protection facilities through the completion of acceptance

2020

07-31

Jinxi plant environmental protection facilities through the completion of acceptance

2020

07-30

Daye Jianfeng Safety Standard was awarded as the only award-winning enterprise in daye city in 2015.

Due to the achievements made in the establishment of secondary safety production standardization, daye peak cement company recently received a special award of 200000 yuan from daye municipal government. In order to encourage industrial and commercial enterprises in the region to improve their production safety, daye municipal government set up a special fund in 2015, stipulating that 200000 yuan will be awarded to those who pass the secondary safety standardization review before December 31, 2015. It is understood that among the industrial and commercial enterprises in daye city, there were 4 enterprises that applied for and passed the examination in 2015, but only daye peak passed the examination before December. Therefore, Daye Peak has become the only enterprise that has won the special award for the establishment of the safety standard in Daye City in 2015. (Ye Meifang)

2020

07-31

Two Cement Enterprises Start to Implement "Big Patrol Inspection"

With the change of the competition situation in the industry, the profit space of cement production enterprises has been greatly squeezed. Reducing costs and increasing efficiency and job optimization have become the inevitable choice to improve the enterprise's own development ability and enhance the core competitiveness. In accordance with the requirements of the group company to realize the transformation from extensive management to lean management, combined with the advanced experience of peer enterprises, recently, Yunnan peak, daye peak two enterprises have implemented "big inspection" to promote the overall optimization of posts. On November 1, daye peak post inspection officially started full operation, starting from the limestone storage yard at the source of the production line to the cement storage. the original 15 posts were merged, and the best experienced mechanics, electricians and post workers were transferred to form a large inspection class, which was mainly responsible for on-site emergency disposal and post routine maintenance to ensure the normal production of the whole production line. In order to ensure the smooth implementation of the large-scale inspection, daye peak management team has repeatedly communicated and discussed with the heads of relevant workshops and departments, and held a special workshop post optimization promotion meeting in September to clarify objectives and responsibilities, formulate implementation steps, and do a lot of preparatory work. At the kick-off meeting for the implementation of the large-scale inspection on October 31, Zhang Fengliang asked daye peak employees to recognize the current situation of serious cement overcapacity and cruel market competition, understand the necessity of implementing the large-scale inspection, and asked the workshop leaders to do a good job in training and guiding the employees, shorten the transition period, normalize the operation of the large-scale inspection as soon as possible, and at the same time, managers should also change their working ideas and concepts and do a good job in full-time, strengthen the inspection, overhaul and maintenance of the regular day shift, and find and solve the problems existing in the equipment and process in time.

2020

07-30

< 1...53 54 55...61 > 跳转到页