Concrete pouring
Release time:
2020-07-07
concrete pouring should comply with the corresponding construction specifications, special attention should be paid to:
1, concrete in the construction of water-absorbing objects involved in the corresponding treatment before pouring, in order to avoid concrete moisture absorption, affecting the quality of concrete.
2, concrete should be poured before the initial setting, and there can be no segregation phenomenon, if there is segregation phenomenon, should be re-mixing, before pouring, and pouring process should also avoid segregation phenomenon.
3. When pouring structures such as columns, a layer of 50-100mm cement mortar (the mix ratio is the same as that in concrete) shall be poured at the bottom to avoid honeycomb pitting.
4, concrete pouring, should be carried out in layers according to the structural requirements, with pouring and tamping.
5. The overall concrete pouring of general structures shall be carried out continuously as much as possible to avoid intermittent construction. In the initial stage after concrete pouring, the concrete shall be protected from vibration or impact.
7. When making cement floor, roof platform and other parts, attention should be paid to the plastering operation. Generally, it should be plastered many times until there is no bleeding on the surface, but dry powder should not be sprinkled and cured in time during the plastering process.
8. In order to prevent early cracks in road construction, attention should be paid to:
①. Under the condition of meeting the design grade of concrete, accurate measurement should be made, excessive cement should not be used, and the unit water consumption of concrete should be mastered to reduce the shrinkage of concrete.
②, do not use high-temperature cement, the cement temperature during site construction should be lower than 70 ℃. In summer construction, the pouring temperature of concrete should be reduced as much as possible, the operation time from the beginning of pouring to the completion of surface finishing should be shortened, and the concrete should be fully cured. Regardless of the circumstances and conditions, the temperature of the concrete mixture shall not exceed 35 ℃. During winter construction, the mixing time should be extended, and the discharge temperature should not be lower than 10 ℃. At the same time, after the construction of pavement concrete, the first three days of maintenance temperature should be maintained above 10 ℃, the next 7 days of maintenance temperature should be maintained above 5 ℃.
③. When using dry aggregate exposed to sunlight for a long time, water shall be fully sprinkled to cool down.
④, the top surface of the base should be fully wet before pouring concrete, or take waterproof measures.
⑤, concrete surface finishing process, to avoid direct sunlight, do not make the temperature rise and dry.
⑥. According to the strength development, master the appropriate time for plate cutting to prevent the concrete slab from breaking.
Peak Cement Implementation GB175-1999 Standard Strength Guarantee Value
| Product Species |
Strength Grade |
Compressive Strength Mpa |
flexural strength Mpa |
||
| 3d |
28d |
3d |
28d |
||
| silicate cement |
42.5R |
25.0 |
48.0 |
4.5 |
7.5 |
| 52.5 |
27.0 |
56.0 |
4.5 |
8.0 |
|
| Ordinary Silicate Cement |
32.5R |
18.0 |
40.0 |
4.0 | #
6.5 |
| 42.5 |
20.0 |
48.0 |
4.0 |
7.5 |
|
| 42.5R |
23.0 |
48. |
4.5 |
7.5 |
|
| 52.5 |
26.0 |
56.0 |
4.5 |
8.0 |
|
| Composite Cement |
32.5R |
18.0 |
40.0 |
4.0 |
6.5 |
More information
On the afternoon of June 9, Peak Cable Company organized all employees to learn fire fighting knowledge and conducted fire fighting and emergency escape drills. Since June, the subordinate enterprises of the company have organized training, learning and drills related to production safety according to their own characteristics and combined with the actual work. Safety production month series of activities carried out in an orderly manner.
2022
06-13
Spike Postdoctoral Research Papers on International Frontier Journals
Recently, good news came from the postdoctoral workstation of Jianfeng Pharmaceutical. Under the guidance of workstation mentor Jiang Xiaomeng, associate researcher Yang Xiaoxiao has made new progress in the treatment of alcoholic liver disease. The relevant research results "Roxadustat, a hypoxia-inducible factor 1a activator, attenuates both long- and short-term alcohol induced alcoholic liver disease" were published in the internationally renowned academic journal "Frontiers in Pharmacology. This journal is a frontier journal in the field of international pharmacy, mainly publishing academic papers and information on basic and clinical pharmacology, medicinal chemistry, pharmacology and toxicology.
2022
06-01
Daye Peak QC Achievements Won the Third Prize of Huangshi City
On May 7, Huangshi City Quality Strong City Working Committee organized a 2022 QC Results Conference. The QC project of "Technical Transformation of Ore Limestone Batching System" of Daye Peak Cement Company won the third prize.
2022
06-01
On April 28, Dalian Commodity Exchange held an online working meeting to announce the results of the 2021 excellent delivery warehouse and delivery warehouse excellent futures personnel selection, peak international trading company won the 2021 "excellent designated delivery warehouse" title, futures commissioner Ruan Weihang won the "excellent futures personnel" title.
2022
06-01
Cranberry extract combination identification detection method won the invention patent
After cranberry extract products were included in the "Zhejiang Province Key High-tech Product Development Project Plan" in 2021, Jianfeng Health Technology Company recently obtained an invention patent for the identification and detection method of cranberry extract. This new combined identification and detection method developed by Jianfeng Health identifies whether catechin or procyanidin B2 is added in cranberry extract by thin layer analysis, and then detects the unique A- type procyanidin and its chromatographic distribution in cranberry extract by high performance liquid chromatography, so as to improve the accuracy of product judgment. The identification method has the characteristics of accurate results and short detection time, which is of great significance to standardize the cranberry extract market and promote the healthy development of the industry, and has been unanimously recognized by peers.
2022
05-20
Daye Peak Manufacturing Department Won the Title of "Worker Pioneer" in Hubei Province
A few days ago, the manufacturing department of Daye Peak Cement Company was awarded the title of "Worker Pioneer" by the Hubei Provincial Federation of Trade Unions. Daye Jianfeng Manufacturing Department not only continued to actively explore and achieved good results in energy saving and consumption reduction, technological transformation, product quality process control, and economic responsibility system to guide management, but also improved Daye Jianfeng's overall operation level and won Huangshi City The seventh "Mayor Quality Award" created conditions and was fully affirmed by government departments at all levels.
2022
05-20
Contact Us
No. 88 Wujiang East Road, Jinhua City, Zhejiang Province, China
Tel: +86-579-82326868
Fax : +86-579-82324666
©2023 Zhejiang Jianfeng Group Co., Ltd. Powered by: www.300.cn SEO Business License
SAF Coolest v1.2 设置面板 SHJSS-AHDB-FSSQE-ZSW
无数据提示
Sorry, the current column has no content !
You can view other columns or return to Home Page