Daye Peak Equipment Technical Transformation Bonus
Release time:
2020-07-22
Daye spike equipment technical reform dividend
News due to the new crown pneumonia epidemic prevention and control shutdown period, Daye spike cement company for the shortcomings found in the past production, carried out a more comprehensive equipment technical reform. Since the resumption of production, with the gradual recovery of Hubei cement market, Daye peak production, sales work tends to be normal, the effectiveness of equipment technical reform is also increasingly apparent. After the Spring Festival of
, Daye Peak focused on a series of technical reforms such as "changing two warehouses to three warehouses", "optimizing the feeding device of roller press" and "lithium slag feeding system" for the cement mill system. Cement mill 3 cake hoist, 1 , 2 grinding head hoist, the tail wheels of 1# and 2# grinding tail hoists were renovated and put into use on 3 28 . In early 4 , the upgrade and transformation of the communication system was completed and put into use. After a period of actual operation, the technical indicators of these equipment after technical transformation have been improved compared with the past, and the purpose of transformation and upgrading has been achieved. After a series of technological transformation of
cement grinding system, the output of cement grinding table increased by nearly 15 tons year on year, and the power consumption of tons of cement grinding decreased by 1.5kwh/t year on year, with obvious effect of increasing production and reducing consumption. On the basis of the renovation of the cement delivery system in 2018 , through optimized management, the Roots blower pipeline at the bottom of the cement warehouse is regularly dredged, and the ash discharge equipment is regularly maintained and maintained. The delivery efficiency of the warehouse is further improved, and the daily delivery capacity is significantly improved, which can fully meet the requirements of cement output. Since
Daye Peak was put into production, the tail wheel of the cement mill system hoist has been in the form of a pressure bar type counterweight box, with counterweight or tooth occlusion at the top of the tail. During operation, the counterweight also causes loose side sealing and material leakage, resulting in fast bearing wear, frequent maintenance, heavy maintenance workload, and waste of cement and environmental pollution. For this reason, Daye Peak removed 5 external counterweight tail wheels of hoists during technical renovation, modified built-in counterweight tail wheels, and adopted maintenance-free wear-resistant sleeves. The modified tail wheel runs briskly, the motor temperature rises low, and the current is stable. The problem of ash leakage and material leakage is completely solved. The transformation not only reduces the labor intensity of employees, but also protects the environment and provides a guarantee for the stable operation of the hoist.
Daye Peak General Step-down Station was built in 2007 and has been in operation for 12 years. With the passage of time and the aging of the equipment, the channel is not smooth, the operation is delayed, the main transformer upshift is not timely, the capacitor is closed, the opening switch does not respond, and the instruction of 10KV switch cabinet is not executed or delayed. Seriously affect the safe operation of power distribution equipment. The communication management machine, GPS timing system, 10KV relay protection device, background power monitoring and management software, etc. are upgraded and transformed, which not only improves the communication speed and data acquisition, but also improves the response of telemetry, remote signaling and remote control, ensures the safety and reliability of the communication system and ensures the safe and stable operation of power distribution equipment. (Wang Yiyan Liu Chao Shi Zhangliang)
More information
Tianjin Flemish Company Donates Anti-epidemic Materials
On the morning of July 13, Tianjin Jianfeng Flanders Pharmaceutical Technology Development Co., Ltd. donated materials to the Tianjin Development Zone Charity Association to help the development zone community fight the epidemic.
2020
08-05
In late July, leaders of the group company Jiang Xiaomeng, Yu Jianhong, Chen Tianci and Qin Xuping visited subordinate enterprises separately and sent heatstroke prevention and cooling supplies to employees working under high temperature, urging everyone to pay attention to heatstroke prevention and cooling and safe production work to ensure good physical condition.
2020
08-05
On July 17 and 18, the Group's work analysis meeting for the first half of 2020 was held at the Peak Building of the Group's headquarters to summarize and review the work in the first half of the year and make arrangements for the work in the second half of the year.
2020
08-05
The company requires to do a good job in summer safety production
The high temperature season is approaching, and the group company issued a notice a few days ago to make arrangements for safe production in summer.
2020
08-05
The company requires to do a good job in summer safety production
The high temperature season is approaching, and the group company issued a notice a few days ago to make arrangements for safe production in summer. The notice requires all subordinate units of the company to attach great importance to the work of production safety in summer, and all production and business units should hold a special meeting on production safety in summer. According to the characteristics of production in summer, they should focus on safety risk analysis for mines, outdoor operations and high-temperature posts, and implement control measures to avoid the occurrence of safety accidents such as scalding, heatstroke and electric shock. In order to further strengthen the safety production management in the high temperature season, the notice requires the main person in charge of each production and business unit to lead a team to conduct a comprehensive inspection of the production and business premises according to the characteristics of summer production; strengthen the daily safety production inspection of key posts and special posts; timely rectify the found unsafe behaviors and hidden dangers; Strengthen the management of the storage and use of flammable, explosive, dangerous chemicals and drugs; cooling measures shall be taken for the space exceeding the storage temperature limit of articles. If it is found that the electrical equipment circuit and exhaust fan circuit are aged and damaged, replace them in time and keep the grounding wire in good condition. Do a good job in checking the fire pool, pipeline water pressure and fire extinguishing equipment to ensure that the fire fighting facilities are sensitive, intact and reliable. The high temperature in summer is also a period of frequent occurrence of heatstroke and other diseases. The notice requires all units to do a good job in heatstroke prevention and cooling, implement various relevant measures, and equip necessary cooling facilities or materials such as fans, air conditioners, ice cubes and other cooling facilities or materials according to the conditions of the production site; do a good job in the distribution of heatstroke prevention drugs, supplies and cool drinks in workshops, warehouses, construction sites and other production lines; strengthen canteen management to prevent food poisoning. (this newspaper reporter)
2020
07-22
The company requires to do a good job in summer safety production
The high temperature season is approaching, and the group company issued a notice a few days ago to make arrangements for safe production in summer. The notice requires all subordinate units of the company to attach great importance to the work of production safety in summer, and all production and business units should hold a special meeting on production safety in summer. According to the characteristics of production in summer, they should focus on safety risk analysis for mines, outdoor operations and high-temperature posts, and implement control measures to avoid the occurrence of safety accidents such as scalding, heatstroke and electric shock. In order to further strengthen the safety production management in the high temperature season, the notice requires the main person in charge of each production and business unit to lead a team to conduct a comprehensive inspection of the production and business premises according to the characteristics of summer production; strengthen the daily safety production inspection of key posts and special posts; timely rectify the found unsafe behaviors and hidden dangers; Strengthen the management of the storage and use of flammable, explosive, dangerous chemicals and drugs; cooling measures shall be taken for the space exceeding the storage temperature limit of articles. If it is found that the electrical equipment circuit and exhaust fan circuit are aged and damaged, replace them in time and keep the grounding wire in good condition. Do a good job in checking the fire pool, pipeline water pressure and fire extinguishing equipment to ensure that the fire fighting facilities are sensitive, intact and reliable. The high temperature in summer is also a period of frequent occurrence of heatstroke and other diseases. The notice requires all units to do a good job in heatstroke prevention and cooling, implement various relevant measures, and equip necessary cooling facilities or materials such as fans, air conditioners, ice cubes and other cooling facilities or materials according to the conditions of the production site; do a good job in the distribution of heatstroke prevention drugs, supplies and cool drinks in workshops, warehouses, construction sites and other production lines; strengthen canteen management to prevent food poisoning. (this newspaper reporter)
2020
07-31
Contact Us
No. 88 Wujiang East Road, Jinhua City, Zhejiang Province, China
Tel: +86-579-82326868
Fax : +86-579-82324666
©2023 Zhejiang Jianfeng Group Co., Ltd. Powered by: www.300.cn SEO Business License
SAF Coolest v1.2 设置面板 SHJSS-AHDB-FSSQE-ZSW
无数据提示
Sorry, the current column has no content !
You can view other columns or return to Home Page