Retrofit of Daye Peak Bypass Valve
Release time:
2020-07-22
Daye Peak Bypass Valve Reconstruction
News In order to effectively solve the air leakage problem of the kiln tail bypass valve, Daye Peak Cement Company removed the existing flue valve and replaced it with a double-shaft double-disc flue stop valve. Each disc valve has an electric actuator to control the valve opening, which can control each valve individually, the project as a whole was installed and put into use on , 4, August, , 13, 10.
DN4000 Shutter Valve. Due to the use of nearly 11 years, the shutter valve is partially deformed, and the temperature difference between the outlet temperature of the tail boiler and the inlet temperature of the high-temperature fan reaches 18 degrees Celsius. The installation position of the original louver valve is lower than that of the boiler inlet, and there is dust accumulation in the long-term closed state. When the bypass valve is opened each time, the current of the high-temperature fan fluctuates greatly, and there is a potential safety hazard of the high-temperature fan jumping and stopping. The newly replaced double-shaft double-disc flue stop valve is designed with full consideration of the large dust content of the flue gas at the end of the kiln and does not accumulate ash when it is completely closed, thus overcoming the accident caused by the fact that the ash accumulated into the high-temperature fan when the original flue valve is opened. The kiln tail bypass valve is closed tightly, so that the temperature of the flue gas entering the high temperature fan is stable, and the wind pressure of the kiln tail system is more stable. After the renovation of the
SP boiler and the inlet temperature of the high-temperature fan at the kiln end is 4 degrees celsius, and the power generation is obviously increased. in addition, the monitoring temperature of the AQC boiler at the kiln end is 20-30 degrees higher than in previous years after the technological renovation of the grate cooler, and the maximum daily power generation of waste heat generation can reach 24.7. (Chen Jun Feng Junwen)
More information
The company's vocational skill level independently identifies two new occupations
A few days ago, after the examination and approval of the Jinhua Municipal Bureau of Human Resources and Social Security, and reported to the Provincial Department of Human Resources and Social Security for examination and filing, Jianfeng Group's independent identification level of vocational skills was based on last year. Two new occupations (types of work) are chemical inspectors and organic synthesis workers.
2022
05-20
On May 12, Cai Xiaochun, deputy secretary of the Party group of Zhejiang Federation of industry and commerce, and his party visited Jianfeng group for investigation, visited Jinxi factory area of Jianfeng pharmaceutical factory and Jinxi internationalization project site, and had a discussion with Jiang Xiaomeng, chairman of the group company, Huang Jinlong, deputy general manager of the group company and general manager of the pharmaceutical company.
2022
05-20
On the afternoon of April 6, Jiang Xiaomeng, chairman of the group company, was invited to participate in the Jinhua News Client Financial Media Interview column "Night Talk of the Two Sessions", as a representative of the Jinhua Municipal People's Congress, to talk about suggestions for the future development of Jinhua enterprises. As the chairman of the Jinhua City Federation of Industry and Commerce, Jiang Xiaomeng has a personal experience of various problems encountered in the development of Jinhua enterprises. After careful investigation and full preparation, he put forward two proposals on strengthening the empowerment and allocation of production factors and further enhancing the market competitiveness of enterprises in our city and further promoting the compliance construction of private enterprises in our city and reducing the risk of enterprise operation. In the "two sessions night talk" interview, he put forward his own views on these two topics.
2022
04-12
Group Companies Commend 2021 Advanced
On the morning of January 26, the group company held the 2021 annual summary commendation meeting to review the work of the previous year, make arrangements for the work of 2022, sign the 2022 economic responsibility system with various professional companies and directly affiliated enterprises, and solemnly commend the 2021 advanced collectives and individuals.
2022
02-08
Group Company Convenes Workers' Representative and Trade Union Member Representative Conference
The group company held a representative meeting of staff representatives and trade union members, elected members of the eighth trade union committee and members of various special committees, and Shi Fu was elected chairman of the eighth trade union of the group trade union.
2022
02-08
The group company held an annual safety and environmental protection work conference to comprehensively summarize and review the safety and environmental protection work in 2021, make arrangements for the safety and environmental protection work in 2022, and sign the safety and environmental protection work responsibility system.
2022
02-08
Contact Us
No. 88 Wujiang East Road, Jinhua City, Zhejiang Province, China
Tel: +86-579-82326868
Fax : +86-579-82324666
©2023 Zhejiang Jianfeng Group Co., Ltd. Powered by: www.300.cn SEO Business License
SAF Coolest v1.2 设置面板 SHJSS-AHDB-FSSQE-ZSW
无数据提示
Sorry, the current column has no content !
You can view other columns or return to Home Page