Daye peak overhaul technical reform results appear
Release time:
2020-07-22
Daye Peak Overhaul Technical Transformation Results Showing
News During the Spring Festival overhaul this year, Daye Peak Cement Company carried out a comprehensive technical transformation and maintenance of the production equipment in the factory area. Since 4# August 10 ignition to resume production, the operation effect is remarkable.
Daye Peak Investment ,200 ,000 Yuan has systematically reformed the cement mill. Two cement mills and two warehouses have been changed into three warehouses mills. The grate plate has been replaced with a non-stick ball grate plate to ensure ventilation in the mill. The new material retaining ring has been replaced in the second warehouse to reduce the flow rate in the mill, optimize the layout of the existing frequency conversion fans of 132KW , 90KW and 75KW , increase the ventilation area of large cloth bags of 3 roller press, reform the feeding devices of three roller presses and pneumatic rod valves, adjust the blanking of the cone of the steady flow bin of 1 and 2 roller presses, and reform the technical reform of lithium slag hopper. At present, the work of the three roller presses has been significantly improved. The current of the two storage hoists is more than 5A higher than the best level before the renovation. It is expected that the hourly output will be increased by more than 15 tons. The grinding cement 0.080mm sieve residue can be stably controlled below 2.5% , and the sieve residue of 0.045mm is controlled within 10% . The regulation means is effective, according to the daily report, the power consumption of tons of cement grinding can be reduced by 1.5kwh after the transformation, and the expected transformation effect is achieved overall.
Daye Peak originally adopted the third generation grate cooler of Tianjin Institute. Although it has been upgraded several times in the past ten years, with the increase of kiln output, the cooling effect of clinker is getting worse and worse, which not only affects the thermal power of kiln system and increases energy consumption, but also greatly affects the output of cement grinding table, grinding power consumption and cement quality in the next cement grinding process due to the high clinker temperature. In order to maintain the leading cost and advanced technology in the industry, Daye Peak updated the original grate cooler. The Tianjin Institute's traveling steady flow cooler has the characteristics of good cooling effect and convenient equipment maintenance, and is equipped with the most advanced Halifax cooling fan in the industry. After several days of debugging and operation, the retrofit effect of grate cooler has initially appeared. The clinker discharge temperature is controlled below 120 degrees. The maximum grate bed speed of grate cooler is given 7.5 times / minutes. The fan air volume and grate speed still have a large margin. The bottleneck of restricting the energy saving, high yield and high efficiency of the kiln system has been broken, and the reduction of the temperature of the incoming clinker has also created a prerequisite for the next process of cement grinding to increase production capacity, reduce energy consumption and stabilize quality.
In addition, Daye Peak also shifted the original desulfurization gypsum batching bucket and added a lithium slag mixing batching bucket to increase the amount of lithium slag used to ensure normal feeding, and at the same time, it is also convenient to further expand the variety of mixed materials. (Wang Yiyan Hong Wenbo)
More information
Recently, it was learned from the competent department that the "ERP/MES full-process informatization" project of Jianfeng Pharmaceutical Company has been included in the list of key projects of "integration of industrialization and industrialization" in Jinhua City, and has now entered the publicity period. In order to speed up the in-depth integration of informatization and industrialization, according to the evaluation criteria in Jinhua City's "Several Opinions on Accelerating Informatization Construction" and "Jinhua City Informatization and Industrialization Integration Key Project Management Measures", 148 projects were included in 2017 Jinhua City's "Integration of Industrialization and Industrialization" key projects. The "ERP/MES Full Process Informatization" project of Jianfeng Pharmaceutical Co., Ltd. was finally included in the list after being recommended, material reviewed and expert reviewed by Jinhua Economic and Information Committee. The ERP-level subsystems of ERP/MES full-process informatization project include sales system, procurement system, MRP system, GMPQbD system, connecting UFIDA financial software and HR system. MES-level subsystems include industrial data acquisition and monitoring system, GAMP/MES system, eBPR (electronic batch production record system), cGMP quality assurance system, QC/eBTR(QC process and electronic batch inspection record system), LIMS system, etc. After the construction is completed, the visualization of drug production process and the collection and integration of industrial data will be realized. Realize the electronization of drug production process parameters, electronic batch production and inspection records; the realization of big data integration of industrial data and information will also be in line with the regulatory concept of GMP data integrity and quality traceability to the greatest extent. The establishment of a unified enterprise information platform will eliminate information islands and realize data one.
2020
07-31
The company's first-half profit record high
According to the 15th meeting of the ninth board of directors of the company on August 25, in the first half of 2017, the company achieved a net profit of 240.5357 million yuan, the highest level in half a year's history. In the first half of 2017, the company focused on the general work policy of "grasping trends, precise development, strengthening management, and improving efficiency", grasping the opportunities brought by economic structure optimization and industrial upgrading, strengthening lean production and management improvement internally, and actively exploring externally Develop new opportunities and continue to promote the "three reductions and three improvements" work. Through the joint efforts of all employees of the company, the best semi-annual performance in history has been achieved. As of the end of June 2017, the company's total assets were 4.226 billion yuan and net assets were 2.511 billion yuan; the company achieved total operating income of 1,305.9327 million yuan, an increase of 18.42 percent over the same period last year, and net profit attributable to owners of the parent company was 240.5357 million yuan, an increase of 132.11 percent over the same period last year. Earnings per share are 0.7 yuan. In the second half of the year, the company will continue to focus on the annual business plan, carry out in-depth work of "three reductions and three improvements", further do a good job in internal control, prevent business risks, and further do a good job in safety and environmental protection. we will further develop and improve the complementary relatively diversified main business structure and constantly enhance the company's core competitiveness. The 15th meeting of the 9th board of directors held on August 25 was presided over by Jiang Xiaomeng, chairman of the group company. Four proposals and reports including the 2017 semi annual report and the proposal on the change of the company's accounting policy were deliberated and passed. on the same day, the 12th meeting of the eighth board of supervisors was held,
2020
07-31
General Manager Yu Jianhong to Yunnan Peak to Guide Work
On August 23, Yu Jianhong, general manager of the group company, went to Yunnan Jianfeng cement company for investigation and guidance, and put forward requirements for the key work in the last few months of this year. At the peak of Yunnan Province, Yu Jianhong went deep into the production site to learn more about the current production and operation situation, and convened the middle-level and above management backbones to have in-depth exchanges and discussions with everyone on the problems existing in work efficiency changes, personnel stability, current production and management after the implementation of post optimization and re-organization. Since the beginning of this year, Yunnan's peak production and sales volume, profits and various technological and technical indicators have been relatively ideal. The kiln output in April has also reached the best level since it was put into production. The development and maintenance of the market, the environmental management of the factory area, and the professional quality and mental state of cadres and workers have also been greatly improved. While fully affirming the above achievements, Yu Jianhong pointed out that as the homogenization of the cement market becomes more and more serious, the market changes faster and faster. If we can't recognize the situation and seize the opportunity, enterprises will face more and more problems. In this case, the management backbone should give full play to the role of the backbone, quickly change the management concept, and strive to improve the competitiveness of enterprises. In view of the focus of work in the last four months of this year, Yu Jianhong put forward the following requirements for Yunnan Jianfeng: break the inherent concept of post functions and responsibilities, set up posts and organizational structures around logistics, people flow and capital flow, and cultivate and forge a team that can fight well. To further implement the training of job skills and quality, managers should take the lead in strengthening their own learning and formulate annual, monthly and weekly training plans, through the combination of internal and external training, theory and practice.
2020
07-30
General Manager Yu Jianhong to Yunnan Peak to Guide Work
On August 23, Yu Jianhong, general manager of the group company, went to Yunnan Jianfeng cement company for investigation and guidance, and put forward requirements for the key work in the last few months of this year. At the peak of Yunnan Province, Yu Jianhong went deep into the production site to learn more about the current production and operation situation, and convened the middle-level and above management backbones to have in-depth exchanges and discussions with everyone on the problems existing in work efficiency changes, personnel stability, current production and management after the implementation of post optimization and re-organization. Since the beginning of this year, Yunnan's peak production and sales volume, profits and various technological and technical indicators have been relatively ideal. The kiln output in April has also reached the best level since it was put into production. The development and maintenance of the market, the environmental management of the factory area, and the professional quality and mental state of cadres and workers have also been greatly improved. While fully affirming the above achievements, Yu Jianhong pointed out that as the homogenization of the cement market becomes more and more serious, the market changes faster and faster. If we can't recognize the situation and seize the opportunity, enterprises will face more and more problems. In this case, the management backbone should give full play to the role of the backbone, quickly change the management concept, and strive to improve the competitiveness of enterprises. In view of the focus of work in the last four months of this year, Yu Jianhong put forward the following requirements for Yunnan Jianfeng: break the inherent concept of post functions and responsibilities, set up posts and organizational structures around logistics, people flow and capital flow, and cultivate and forge a team that can fight well. To further implement the training of job skills and quality, managers should take the lead in strengthening their own learning and formulate annual, monthly and weekly training plans, through the combination of internal and external training, theory and practice.
2020
07-31
Spike Pharmaceuticals set out to explore a new sales model
Agency and Terminal Link Production and Chain Cooperation Spike Pharmaceuticals to Explore New Sales Models From August 16 to 21, the 2017 China Pharmaceutical Retail Industry Information Conference (hereinafter referred to as "Xipu Conference") with the theme of "Building a Blueprint-Market Awakening Focusing on Demand" was held in Boao, Hainan. Huang Jinlong, deputy general manager of the group company and general manager of the pharmaceutical company, and relevant leaders of Spike Health, pharmaceutical sales company and Spike Pharma pharmacy were invited to attend the event, to create a new sales model "road". This year coincides with the 10th anniversary of the Western Conference. More than 1200 mainstream chain pharmacies, more than 800 brand pharmaceutical industries, more than 100 cross-border affiliated institutions, more than 130 top domestic and foreign capital institutions, more than 60 representatives of authoritative media, and authoritative experts in the industry, with nearly 4000 people gathered in Boao. The meeting combed the context of the pharmaceutical retail industry in the past ten years, discussed the development of the industry in the new decade, and built a new blueprint for the industry. During the meeting, Huang Jinlong led the peak participants to have in-depth exchanges with the organizers of the conference and industry experts on issues such as the impact of national policies such as the brand strategy of enterprises, the role of brand enterprises in the industry, medical reform, prescription outflow, etc. on the original sales mode of pharmaceutical enterprises. He also had extensive contact with pharmaceutical counterparts and terminal chains, listened to front-line sales experience, collected relevant information on terminal chains, and collected market trends of the top 100 chains. In the past ten years, the scale of drug retail sales in China has increased from 143 billion yuan to 337.7 billion yuan, and the chain rate has increased from 35.3 percent to 49.4 percent.
2020
07-31
General Manager Yu Jianhong to Yunnan Peak to Guide Work
On August 23, Yu Jianhong, general manager of the group company, went to Yunnan Jianfeng cement company for investigation and guidance, and put forward requirements for the key work in the last few months of this year. At the peak of Yunnan Province, Yu Jianhong went deep into the production site to learn more about the current production and operation situation, and convened the middle-level and above management backbones to have in-depth exchanges and discussions with everyone on the problems existing in work efficiency changes, personnel stability, current production and management after the implementation of post optimization and re-organization. Since the beginning of this year, Yunnan's peak production and sales volume, profits and various technological and technical indicators have been relatively ideal. The kiln output in April has also reached the best level since it was put into production. The development and maintenance of the market, the environmental management of the factory area, and the professional quality and mental state of cadres and workers have also been greatly improved. While fully affirming the above achievements, Yu Jianhong pointed out that as the homogenization of the cement market becomes more and more serious, the market changes faster and faster. If we can't recognize the situation and seize the opportunity, enterprises will face more and more problems. In this case, the management backbone should give full play to the role of the backbone, quickly change the management concept, and strive to improve the competitiveness of enterprises. In view of the focus of work in the last four months of this year, Yu Jianhong put forward the following requirements for Yunnan Jianfeng: break the inherent concept of post functions and responsibilities, set up posts and organizational structures around logistics, people flow and capital flow, and cultivate and forge a team that can fight well. To further implement the training of job skills and quality, managers should take the lead in strengthening their own learning and formulate annual, monthly and weekly training plans, through the combination of internal and external training, theory and practice.
2020
07-31