Transformation of Daye Peak Total Drop System
Release time:
2020-07-22
Daye Peak Total Descent System Renovation
News from our newspaper 4# July 1 - 10 , Daye Peak Cement Company used the gap before putting into production after overhaul to renovate the total descent system.
The background operating system of Daye Peak General Step-down Station has poor channel and delayed operation due to the aging of communication equipment. The main transformer's up-down gear is not timely, and the capacitor closing and opening do not respond. The instructions for 10kV switch cabinet such as opening and closing are not executed or delayed, and the basic readings in the background, such as duty log and measurement data, are sometimes absent, it seriously affects the safe, stable and orderly operation of power distribution equipment, and also brings great troubles to the personnel on duty. Moreover, according to the service life of the equipment, Daye Peak has been in operation for 11 years and must be upgraded and replaced.
years later due to the impact of the epidemic, equipment procurement and processing of accessories due to logistics restrictions can not be in place in time, after the winning manufacturer and coordination with all parties, with the epidemic relief, finally in 3 29 from Wuhan to the plant. Daye Peak immediately contacted the power supply ground dispatching station and delayed the power outage to 4 July 1 - 2 . Considering the importance of internal communication, the internal communication network was first reformed, the original communication management machine, GPS timing system and 8 relay protection devices were replaced, the background power monitoring and management software was upgraded, the setting value of 10KV relay protection was recalculated and input, and 11 electric meters were newly installed (for data collection of energy management system), after repeated debugging and trial operation, the overall feeling is that the communication channel is unblocked and there is no "blocking" phenomenon. The response to the switch-on and switch-off instructions of the main transformer and the 10KV switch cabinet is timely. After the background upgrade, the desktop data is stable, the report data is true and reliable, and the equipment runs safely and orderly.
After hard work, the renovation was successfully debugged before the kiln was ignited and produced, without affecting the production, delivery and overhaul of finished products. The quality of the renovation project has achieved the expected results. At the same time, Daye Peak will also refer to the later planning plan of Huangshi power transmission network and the requirements of dispatching data collection, replace the original communication management machine according to the specific conditions of the upper substation (axle transformer), and use optical transmission equipment to transmit the information of total reduction, waste heat and safety network to the dispatching. It is planned to overhaul and implement it next year.
After transformation and upgrading, the system communication speed is improved, the data collection time is improved, the information (telemetry, remote signaling, remote control) response efficiency is improved, and the safety and reliability of the communication system are guaranteed. (Zhang Qingyu)
More information
Tianjin Flemish Company Donates Anti-epidemic Materials
On the morning of July 13, Tianjin Jianfeng Flanders Pharmaceutical Technology Development Co., Ltd. donated materials to the Tianjin Development Zone Charity Association to help the development zone community fight the epidemic.
2020
08-05
In late July, leaders of the group company Jiang Xiaomeng, Yu Jianhong, Chen Tianci and Qin Xuping visited subordinate enterprises separately and sent heatstroke prevention and cooling supplies to employees working under high temperature, urging everyone to pay attention to heatstroke prevention and cooling and safe production work to ensure good physical condition.
2020
08-05
On July 17 and 18, the Group's work analysis meeting for the first half of 2020 was held at the Peak Building of the Group's headquarters to summarize and review the work in the first half of the year and make arrangements for the work in the second half of the year.
2020
08-05
The company requires to do a good job in summer safety production
The high temperature season is approaching, and the group company issued a notice a few days ago to make arrangements for safe production in summer.
2020
08-05
The company requires to do a good job in summer safety production
The high temperature season is approaching, and the group company issued a notice a few days ago to make arrangements for safe production in summer. The notice requires all subordinate units of the company to attach great importance to the work of production safety in summer, and all production and business units should hold a special meeting on production safety in summer. According to the characteristics of production in summer, they should focus on safety risk analysis for mines, outdoor operations and high-temperature posts, and implement control measures to avoid the occurrence of safety accidents such as scalding, heatstroke and electric shock. In order to further strengthen the safety production management in the high temperature season, the notice requires the main person in charge of each production and business unit to lead a team to conduct a comprehensive inspection of the production and business premises according to the characteristics of summer production; strengthen the daily safety production inspection of key posts and special posts; timely rectify the found unsafe behaviors and hidden dangers; Strengthen the management of the storage and use of flammable, explosive, dangerous chemicals and drugs; cooling measures shall be taken for the space exceeding the storage temperature limit of articles. If it is found that the electrical equipment circuit and exhaust fan circuit are aged and damaged, replace them in time and keep the grounding wire in good condition. Do a good job in checking the fire pool, pipeline water pressure and fire extinguishing equipment to ensure that the fire fighting facilities are sensitive, intact and reliable. The high temperature in summer is also a period of frequent occurrence of heatstroke and other diseases. The notice requires all units to do a good job in heatstroke prevention and cooling, implement various relevant measures, and equip necessary cooling facilities or materials such as fans, air conditioners, ice cubes and other cooling facilities or materials according to the conditions of the production site; do a good job in the distribution of heatstroke prevention drugs, supplies and cool drinks in workshops, warehouses, construction sites and other production lines; strengthen canteen management to prevent food poisoning. (this newspaper reporter)
2020
07-22
The company requires to do a good job in summer safety production
The high temperature season is approaching, and the group company issued a notice a few days ago to make arrangements for safe production in summer. The notice requires all subordinate units of the company to attach great importance to the work of production safety in summer, and all production and business units should hold a special meeting on production safety in summer. According to the characteristics of production in summer, they should focus on safety risk analysis for mines, outdoor operations and high-temperature posts, and implement control measures to avoid the occurrence of safety accidents such as scalding, heatstroke and electric shock. In order to further strengthen the safety production management in the high temperature season, the notice requires the main person in charge of each production and business unit to lead a team to conduct a comprehensive inspection of the production and business premises according to the characteristics of summer production; strengthen the daily safety production inspection of key posts and special posts; timely rectify the found unsafe behaviors and hidden dangers; Strengthen the management of the storage and use of flammable, explosive, dangerous chemicals and drugs; cooling measures shall be taken for the space exceeding the storage temperature limit of articles. If it is found that the electrical equipment circuit and exhaust fan circuit are aged and damaged, replace them in time and keep the grounding wire in good condition. Do a good job in checking the fire pool, pipeline water pressure and fire extinguishing equipment to ensure that the fire fighting facilities are sensitive, intact and reliable. The high temperature in summer is also a period of frequent occurrence of heatstroke and other diseases. The notice requires all units to do a good job in heatstroke prevention and cooling, implement various relevant measures, and equip necessary cooling facilities or materials such as fans, air conditioners, ice cubes and other cooling facilities or materials according to the conditions of the production site; do a good job in the distribution of heatstroke prevention drugs, supplies and cool drinks in workshops, warehouses, construction sites and other production lines; strengthen canteen management to prevent food poisoning. (this newspaper reporter)
2020
07-31
Contact Us
No. 88 Wujiang East Road, Jinhua City, Zhejiang Province, China
Tel: +86-579-82326868
Fax : +86-579-82324666
©2023 Zhejiang Jianfeng Group Co., Ltd. Powered by: www.300.cn SEO Business License
SAF Coolest v1.2 设置面板 SHJSS-AHDB-FSSQE-ZSW
无数据提示
Sorry, the current column has no content !
You can view other columns or return to Home Page