News Center

Home page

Peak Report

News reports

Lin Ronghua: A Busy Person in Health Products Workshop

Release time:

2020-07-22

Lin Ronghua: The busy person

in the health care workshop mentioned Lin Ronghua in Jianfeng Health Technology Company. Everyone said that he is now the busy person in the workshop. After "booking" in advance, I finally saw the legendary busy man. Due to the impact of the epidemic, many factories delayed the resumption of work in the next year, and some packaging materials in the health care product workshop could not be in place in time, so many orders were overstocked in August 3 - 4#, so the workshop production was especially busy in these two months, and as the only craftsman in the health care product workshop, Lin Ronghua became the busiest person in the workshop.

Lin Ronghua is mainly responsible for the production process, production record filling and summary of the production line of the health care product workshop. As soon as he goes to work every day, he will go to the production line to check the feeding number, batch number, specifications and other conditions of raw and auxiliary materials, check whether there is any misoperation of employees in the production process, and ensure the normal production of the workshop. Sometimes when there is a problem with the equipment, he also depends on himself to solve the operation. When it comes to the electrical aspect, he will find a mechanic. Therefore, Lin Ronghua is very familiar with the equipment on the production line. At present, there are five production lines for soft capsules, hard capsules, oral decoction pieces and food (solid beverages and oral liquids) in the health care product workshop. However, only one production line for soft capsules has five or six main equipment such as pill pressing machine and chemical glue. There are dozens of large and small equipment in the five production lines. It takes a lot of time to get familiar with the operation of these main equipment.

"Because I used to work in a health food company, some of the equipment is the same, and it is relatively better to be familiar with it." Lin Ronghua said that it would take more energy to learn and master some new equipment. Last year, the production of Ganoderma lucidum spore oil soft capsule, a new product with good health, required the use of supercritical extraction equipment in the health care product workshop. Before that, it was not used for the product and was in a stagnant state for a long time. Therefore, it was necessary to explore and improve before production to provide materials for product declaration. The process is not familiar with and the performance of the equipment is not clear. We can only explore it slowly by ourselves. Moreover, the differences in raw and auxiliary materials and parameters of the product will affect the production process of the product. The data provided by the equipment manufacturer can only be used as a reference and cannot fully conform to the actual situation of the enterprise. Therefore, the performance, process parameters and other data of this new equipment are obtained by Lin Ronghua and the workshop staff through repeated tests. In the more than two months of exploring the new process, it is common for them to explore the process while producing, compare the data, and work overtime. After understanding the performance of the equipment, Lin Ronghua and his team improved the process parameters, increasing the yield from the original 20% to 25% , reducing the production cost.

Lin Ronghua, while doing his daily work well, also pays attention to strengthening his own study, understanding new products, new processes and new equipment in time, and new processes suitable for the actual production of enterprises. He will also find data, compare data, form materials and report them to the company to apply for process improvement. In his work, Lin Ronghua often discussed the process with the operators. In order to improve the packaging efficiency, everyone proposed to replace the electronic counting machine. The packaging machine purchased by the workshop has the function of automatic capping. However, because some manufacturers' bottles cannot be suitable for this function, manual capping is still required in many cases, which affects the production efficiency. Lin Ronghua also actively communicates with purchasing and contacting bottle manufacturers to purchase packaging materials suitable for automatic capping.

As a workshop technician, Lin Ronghua also has another job to help workshop employees familiarize themselves with the performance of production equipment and process learning to ensure compliance with various production requirements. He said that in recent years, enterprises have paid more attention to cultivating the ability of one employee and multiple posts, laying a good foundation for the rational distribution of employees, and he will also organize workshop employees to learn from time to time, learn new techniques for improvement, consolidate the original product process, and be familiar with the equipment operation on site ...... After the usual indoctrination and accumulated training, the main operation with auxiliary operation, many employees in the health care product workshop can operate several equipment at present. In case of shortage of staff or other special circumstances, employees can be better deployed. (Reporter Ni Yingzhen)

More information

City Red Cross thanks spike help "anti-epidemic"

On February 26, Jinhua City Red Cross Party Secretary, Executive Vice President Shi Yiwei and his entourage to visit the peak, the peak in the prevention and control of the new coronary pneumonia epidemic actively contribute to love, brave social responsibility of the great love and kindness to express gratitude. Jiang Xiaomeng, chairman of the group company, Huang Jinlong, deputy general manager of the group company and general manager of the pharmaceutical company, and Xiang Chongping, deputy general manager of the group company, had a discussion with Vice President Shi Yiwei and his party. In order to solve the difficult problems for caring enterprises to resume work and production, the Municipal Red Cross Society, based on its own functional positioning and giving full play to its unique advantages, conducted a large feedback and return visit to caring enterprises, and jointly established three Red Cross volunteer service teams, including traditional Chinese medicine service, psychological assistance, and emergency rescue training, to take "eight measures" to help caring enterprises resume work and production. Vice President Shi Yiwei led the backbone of three volunteer service teams to the peak for a return visit, expressing his gratitude for the contribution made by the peak in the prevention and control of the new coronary pneumonia epidemic, and sent a letter of thanks and the "New Coronary Pneumonia Prevention and Control Enterprises Resuming Work and Resuming Production Protection Manual". Chairman Jiang Xiaomeng introduced the industrial layout, production and operation of the peak, focusing on the resumption of work and production of the peak enterprises, and put forward opinions and suggestions on the reduction and exemption of basic electricity charges for enterprises, the support policies for small and medium-sized enterprises, and the payment of "five insurance and one fund. (Reporter Ni Yingzhen)

2020

07-15

Peak 2013 corporate bonds complete principal and interest payments

News from our newspaper On November 20, Zhejiang Jianfeng Group Co., Ltd. successfully completed the payment of principal and interest on 2013 corporate bonds (Phase II) (hereinafter referred to as "13 Jianfeng 02"). At this point, all the corporate bonds approved for issuance in 2013 have been paid. In 2013, with the approval of document No. [2013]595 of China Securities Regulatory Commission, the company was allowed to issue corporate bonds with a face value of no more than 0.6 billion yuan to the public, with a debt rating of AA +. On June 5, 2013, the Company issued the 2013 Corporate Bonds (Phase I) ("13 Peak 01"), which raised $0.3 billion at a coupon rate of 4.90 per cent, 1.55 percentage points lower than the then five-year benchmark interest rate for bank loans. On November 20, 2014, "13 Peak 02" was successfully issued, raising 0.3 billion yuan again at a coupon rate of 5.09, and was listed on the Shanghai Stock Exchange on December 11, 2014. The ability to raise 0.6 billion yuan from the capital market at a lower cost reflects investors' recognition of the company's "cement + pharmaceutical" dual business structure and expectations of the company's good operating performance. On June 5, 2018, the first issue of Jianfeng Group's 2013 corporate bonds was due to complete the payment of principal and interest, and now the second issue of corporate bonds has also successfully completed the payment of principal and interest. In the real economic growth is weak, business operations continue to explode, the company in a short period of time successfully completed two issues of a total of 0.6 billion yuan of corporate bonds principal and interest payment work, fully reflecting the company's good operating results in recent years.

2020

07-31

Company Leaders Attend Jinhua Development Conference

News from our newspaper On November 17, the second 2019 Jinhua Development Conference with the theme of "Insist on high-quality integration into the Yangtze River Delta to build a metropolitan area" opened in Jinhua, Zhejiang. More than a thousand people from the scientific and educational circles, business circles, and overseas Chinese from home and abroad Business people, representatives of "New Golden Chinese" and representatives of outstanding Jinhua students attended the meeting. Group leaders Jiang Xiaomeng, Yu Jianhong and Huang Jinlong attended the relevant activities of the conference. As a representative of the Jinhua business community, Jiang Xiaomeng, chairman of the group company, made a keynote speech at the "Scientist" and "Entrepreneur" Innovation Dialogue of the Development Conference, expressing his views on how Jinhua enterprises can improve their technological competitiveness. As the head of Jinhua local enterprise with a history of more than 60 years, Jiang Xiaomeng has a profound experience in promoting the development of enterprises through science and technology. Combined with the reality of peak scientific and technological innovation, he pointed out in his speech that the improvement of scientific and technological innovation ability is an urgent event for Jinhua small and medium-sized enterprises. Private enterprises cannot achieve high-quality development without the support of scientific and technological forces; with the progress of society, the improvement of people's living standards and the continuous improvement of cultural quality, the demand for products and the pursuit of product quality have also undergone qualitative changes. Only products with scientific and technological connotations can attract consumers. He suggested that the government and relevant institutions should establish an information platform to further understand the scientific and technological support that enterprises need in the transformation, understand what kind of help scientific and technological personnel can provide to enterprises, do a good job in the information docking of scientists and entrepreneurs, further attract investment and wisdom, give full play to the scientific and technological achievements of academicians and experts and the capital advantages of businessmen at home and abroad, and promote Jinhua enterprises to better integrate into Changsan

2020

07-31

Company Leaders Attend Jinhua Development Conference

2020

07-22

The Party Committee of the Group conducts thematic education and concentrated study.

On November 12, the Party Committee of the Group Company held a "Do not forget your initiative mind, Keeping in mind the mission" thematic education and study meeting to focus on the relevant spirit of the central and higher Party committees on thematic education and the key points in the "Decision of the Central Committee of the Communist Party of China on Adhering to and Improving the Socialist System with Chinese Characteristics, Promoting the Modernization of the National Governance System and Governance Capacity" previously held at the Fourth Plenary Session of the 19th CPC Central Committee of the 19th CPC Central Committee, and make arrangements for further promoting thematic education in the whole group. According to the central government's schedule for the second batch of thematic education, the group party committee requires all party members and cadres to deeply understand the significance of carrying out the thematic education of "not forgetting the original heart and keeping in mind the mission", and firmly grasp the "keep the original heart, undertake the mission, find the gap, and grasp the implementation" The general requirements of the group party committee members will also go to various enterprises separately in the near future, carry out research on the development of theme education, the current difficulties faced by enterprises and the issues of concern to employees, so as to achieve the effect of closely combining theme education with the promotion of enterprise management, and strengthening the close combination of party building and enterprise development. (this newspaper reporter)

2020

07-31

Company Leaders Attend Jinhua Development Conference

2020

07-31

< 1...26 27 28...61 > 跳转到页