Guo Zhijian: Equipment "Housekeeper" in Cable Workshop"
Release time:
2020-07-22
Guo Zhijian: The equipment "housekeeper"
of the cable workshop found Guo Zhijian in the maintenance room behind the cable production workshop. He just wanted to go to the workshop to see the startup of the refitting machine. This refitting machine is the old equipment bought back last year. It was installed last year and has been continuously improved and debugged. This startup shows that the equipment has been debugged to the best operating state.
Guo Zhijian is mainly responsible for the electrical maintenance of the cable company, but he will also participate in the maintenance when there is a major mechanical failure of the equipment. His office is a small room in the maintenance interval. Toolboxes are placed on the tables and chairs in the small room. Tools that have not yet been packed are placed in the boxes. The most conspicuous ones should be the two shelves in the room. Small parts and some old parts of the equipment are piled on them, and all kinds of old drives occupy nearly one shelf. These old drives are Guo Zhijian's "treasures". He said that although most of them are broken and can't be repaired, they are still reluctant to throw them away because the parts on these devices will come in handy again without knowing when.
Guo Zhijian entered the cable company in 1994 . He was an ordinary operator on the tandem line at the earliest, because he preferred to study the electrical field. When there was a problem with the equipment on the production line, he followed the mechanic to watch. In 2004 , he changed his job to do machine repair and was responsible for electrical maintenance. At first, there were still people with him. By 2008 , he was the only electrician in the cable factory, and each manufacturer's electric control equipment had its own unique design, which had to be familiar with by himself. But it was also the foundation that was laid at that time. Now we can know all about the procurement, installation and commissioning of old equipment, and equipment transformation.
2019 is the year with the most equipment installed and modified since the cable company moved the factory. Due to the need of the order, the cable company received an order last year to produce steel belt winding cables, but the factory did not have steel belt winding equipment. if a new equipment was purchased, it would cost 24 yuan. finally, the cable company decided to purchase a set of old equipment. After many consultations, a suitable one was found, so Guo Zhijian went to see the equipment with his purchasing colleagues. As an old employee who has dealt with cable equipment for more than 20 years, Guo Zhijian had an estimate in his heart after seeing the situation of the old equipment. Finally, he added some accessories and installation costs 7 yuan to win it. He worked overtime with other personnel in the machine repair team to complete the installation and debugging of the equipment in 8-9 last year, which not only saved the cost for the cable company, it also ensured the normal delivery of that batch of orders, which made the customers very satisfied. 2018 , the cable company received a batch of orders for central plastic pipe products. At that time, most of the pay-off equipment in the factory was passive pay-off. The pay-off tension of this equipment was uneven, the wires were easy to be thinned, the performance of the produced cables was not good, and the product quality could not be guaranteed. However, the purchase of a 12 active pay-off device requires more than 30 million yuan. Considering that there is an extra 12 passive pay-off device for the city telephone cable, Guo Zhijian and the mechanic worked together to study and reform it. "The second one has experience in transformation. The processing time of accessories is faster than that of the first one. Now it has been completed." Guo Zhijian said that when the first one was transformed, some detours were taken because there was no reference data, but in the end the transformation was successful, the use effect was very good, and the product was delivered smoothly.
The tractor bought last year has not had time to install it before. This year affected by the epidemic, the Spring Festival holiday time extended, considering the installation will be more complex, electrical transformation, to reinstall the drive, these need to take more time. So on January , Guo Zhijian and two mechanics invited retired Hua Yongming to take protective measures and come back early to install the equipment. When the work resumed, the installation was basically completed. There are a lot of such small modifications, some to meet product needs, some to better product quality, and some to save costs...
More information
The company's vocational skill level self-identification training began.
After preparing the handout materials and question bank for the previous stage of vocational skill grade identification training, daye peak cement company conducted the vocational skill grade identification training for the machine repair team of the manufacturing department on August 10. On August 12 and 18, the pharmaceutical company also organized two phases of vocational skill level identification training for pharmaceutical preparation workers. According to the national skill level standard, the group company is divided into four grades: grade 5/junior worker, grade 4/intermediate worker, grade 3/senior worker and grade 2/technician. According to the analysis of employee registration, since there is only one type of job for pharmaceutical preparation workers, and cement production workers include cement central controller, cement quality inspector, cement clinker calciner, cement manufacturer, cement production inspection worker and other types of jobs, the number of applicants is less than that of cement production workers. Most of the employees who signed up were identified as participating in the four levels of vocational skills. According to preliminary statistics, there are now 155 employees who have signed up for their professional skill level, including 47 pharmaceutical preparation workers and 108 cement production workers. The human resources department of the group company is stepping up efforts to organize personnel to examine the qualifications of the employees whose registration grades are identified, and then enter the Zhejiang professional ability integration platform for formal registration after passing the examination. According to the national vocational skill standards and other content, each unit carries out targeted training for employees who participate in the independent identification of vocational skill levels. The training is conducted through on-site teaching, online teaching, and learning platform question bank exercises. After the training, the group company will organize the employees who participate in the grade identification to carry out examination and assessment, and those who pass the examination will complete the grade identification and issue the skill grade certificate. It is understood that in order to ensure the quality of vocational skill level identification, after the company was approved to independently identify the vocational skill level, the human resources department of the group organized all units to compile the question bank for various types of work in combination with the actual situation of the enterprise and with reference to the national vocational skill standards and training syllabus and other materials. after classification, unification and standardization, verification and proofreading, the preparation of the question bank has been basically completed. After being submitted to the superior unit for examination and approval, the company will import the question bank on the enterprise university platform to facilitate employees to prepare for the examination. The question bank for the independent identification of vocational skills level will also be extracted from the question banks of various industries, including professional ethics, basic knowledge, safety and environmental protection knowledge, laws and regulations knowledge, professional work practice and other national vocational skills standards. Basic requirements. The examination and assessment for independent determination of vocational skill level is tentatively scheduled for mid-September.
2021
08-23
Hu Guoyun, vice mayor of Pu'er, visited the peak
On July 16, a delegation led by Hu Guoyun, vice mayor of Pu'er City, Yunnan Province, and heads of Pu'er SASAC, Industrial Park Management Committee, Investment Promotion Bureau and other departments visited the headquarters of the group company. In the exchange with Jiang Xiaomeng, Yu Jianhong and other group leaders, Hu Guoyun expressed his gratitude to Jianfeng Group on behalf of the Pu'er Municipal Party Committee and Municipal Government. He said that the investment and entrepreneurship from Jianfeng to Pu'er not only promoted the development of Pu'er's regional industrial economy, but also made outstanding contributions to the local poverty alleviation. The two sides also exchanged and discussed issues such as strengthening in-depth cooperation between the two sides.
2021
07-21
Municipal SASAC Party Committee Visited Jianfeng Old Party Member
On June 28, Huang Zunhui, a second-level researcher of the State-owned Assets Supervision and Administration Commission of Jinhua City, visited Jianfeng Group and made a special trip to visit two retired party members, Chen Bingxiang and Yin Rongfu. Among the two Jianfeng veteran party members, Chen Bingxiang has been engaged in party affairs for nearly 30 years, and Yin Rongfu has won the honor of outstanding party members in Zhejiang Province and is a representative of Jianfeng party workers and party members. On behalf of the party committee of the Municipal State-owned assets Supervision and Administration Commission, Huang Zunhui expressed condolences to the two veteran party members, thanked the older generation of party members for their contributions, and exchanged views with Jiang Xiaomeng, secretary of the party committee and chairman of the group, and Qin Xuping, member of the party committee and chairman of the trade union, and fully affirmed the development of peak in recent years and the improvement of the level of party building work.
2021
07-12
"I'll teach you a lesson." Concluded successfully.
On the afternoon of June 24, as one of the highlights of the company's 2021 safety production month series of activities, the second phase of the "I'll give you a lesson" safety training was held at the group headquarters. the management personnel, production backbones and personnel from all departments and offices of the group gathered at the scene. foreign enterprises took safety "big lessons" through video, which was more effective than the teaching. At this point, the "I'll give you a lesson" safety training has come to a successful conclusion.
2021
07-12
Glory in the Party's 50-year-old Party Member Xi Ling Commemorative Medal
On June 23, the party committee of the group company sent a special person to visit and awarded the commemorative medals of "50 years of Glory in the Party" to six veteran party members. 2021 is the 100 anniversary of the founding of the Communist Party of China. For the first time, the Party Central Committee issued the "50 Years of Glory in the Party" commemorative medal to surviving party members who have reached the 50th anniversary of the party and have always performed well. The Organization Department of the Central Committee also specially issued the "Administrative Measures for the Issuance of Commemorative Medals of" Glory in the Party for 50 Years "", which stipulates the issuance procedures, issuance methods, production, and management of commemorative medals. In the future, the "50 Years of Glory in the Party" commemorative medal will be issued as a regular task and will be issued once every year around July 1.
2021
07-12
What is the exact time of the first Congress of the Communist Party of China? Which "big" representatives boarded the red boat in South Lake? What is the connection between the 1972 Sino-US Joint Communique and Hangzhou? On the morning of June 24th, the Party Committee of the Group Company invited members of the Party History Learning and Education Group of Zhejiang Provincial Party Committee and the vice president of Zhejiang Branch of China News Service to give a special party class of "returning to the scene of party history and reappearing the moment of party history" for the party members and cadres of the Company.
2021
07-01
Contact Us
No. 88 Wujiang East Road, Jinhua City, Zhejiang Province, China
Tel: +86-579-82326868
Fax : +86-579-82324666
©2023 Zhejiang Jianfeng Group Co., Ltd. Powered by: www.300.cn SEO Business License
SAF Coolest v1.2 设置面板 SHJSS-AHDB-FSSQE-ZSW
无数据提示
Sorry, the current column has no content !
You can view other columns or return to Home Page