Company Deploys 2020 Safety and Environmental Protection Work 2019 Safety and Environmental Protection Accident-Free Enterprises Reward
Release time:
2020-07-15
On January 21, the Group Company held an annual work meeting on safety and environmental protection attended by members of the Safety Committee, heads of safety and environmental protection of various enterprises and heads of functional departments and offices of the headquarters to summarize and review the work on safety and environmental protection in 2019, sign a responsibility system for safety and environmental protection in 2020, and reward enterprises without accidents in safety and environmental protection in 2019.
In 2019, safety management personnel at all levels of the company will visit and learn from outside to find gaps against benchmarks; internally, they will focus on "carrying out risk analysis and control" and implement on-site safety standardization as a means to explore and learn good methods of safety and environmental protection management. The safety committee of the company organizes personnel to go to the site of each unit to seriously carry out safety and environmental protection inspection and daily supervision, and implement the main responsibility of safety production; it has formulated a safety risk assessment and control system, and promoted the safety risk assessment and control work through visits, learning, special training and other forms; Efforts to promote the construction of standardized and beautiful factories; various enterprises have implemented a number of safety and environmental protection technical reforms, and achieved certain results. During the year, the company's safety production was generally stable, fulfilling the safety production responsibility target issued by the Municipal Economic and Information Commission, and meeting the requirements of 0.5 of the group company's safety internal control index; environmental protection, fire protection, and occupational health are generally in good condition. In particular, the seven assessment units in Jinhua have all achieved the annual goal of establishing a safety and environmental protection accident-free factory, which is the first time since the launch of the activity. The
meeting determined that the company's key work for safety and environmental protection management in 2020 is to focus on operation safety and the safety of equipment and facilities, and further do a good job in safety standardization. Regularly carry out risk point analysis and daily operation dynamic analysis to open up new ideas for safety management, create new management methods, and further do a good job in risk assessment and control; Turn the hidden danger inspection of subordinate enterprises to management inspection, forcing the standardized transformation of safety management in various enterprises; continuing to carry out safety and environmental protection training to improve the quality of full-time and part-time safety management personnel; compiling employee safety behavior norms to promote the standardization and standardization of safety and environmental protection management.
Jiang Xiaomeng, director and chairman of the safety committee of the group company, signed the 2020 safety production responsibility system with various professional companies and directly affiliated enterprises on behalf of the group company. In his speech at the meeting, Jiang Xiaomeng demanded that safety and environmental protection management should grasp the key points of management according to the nature and characteristics of each enterprise's work, carry out investigation and rectification of hidden dangers in a down-to-earth manner, deepen the source control of safety and environmental protection, and further promote the standardization and standardization of safety and environmental protection work, so as to truly attach importance to ideas, improve the system, fully train and implement in place. After analyzing the current situation of safety and environmental protection management of the company, Yu Jianhong, general manager of
Group Company, pointed out that safety and environmental protection management is a systematic science. With the continuous improvement of relevant laws and regulations, great changes have taken place in the safety and environmental protection situation faced by enterprises. Enterprise managers must change their concepts, establish the concept of "safety is the precondition of production and operation and the basic task of managers", and constantly improve the relevant business quality, earnestly and solidly carry out the work; it is necessary to further promote the safety risk assessment work to prevent risks and eliminate hidden dangers to promote the improvement of work efficiency; combine safety and environmental protection management with standardized management and fixed management to further strengthen the work site rectification, so that employees can develop Good working habits, and then promote the establishment of standardized factories and beautiful factories. At the
meeting, the evaluation results of accident-free factories in 2019, the safety and environmental protection responsibility system and the personal safety risk fund assessment were also reported, and enterprises that reached the annual target of safety and environmental protection accident-free factories were rewarded. (this newspaper reporter)
More information
Recently, it was learned from the competent department that the "ERP/MES full-process informatization" project of Jianfeng Pharmaceutical Company has been included in the list of key projects of "integration of industrialization and industrialization" in Jinhua City, and has now entered the publicity period. In order to speed up the in-depth integration of informatization and industrialization, according to the evaluation criteria in Jinhua City's "Several Opinions on Accelerating Informatization Construction" and "Jinhua City Informatization and Industrialization Integration Key Project Management Measures", 148 projects were included in 2017 Jinhua City's "Integration of Industrialization and Industrialization" key projects. The "ERP/MES Full Process Informatization" project of Jianfeng Pharmaceutical Co., Ltd. was finally included in the list after being recommended, material reviewed and expert reviewed by Jinhua Economic and Information Committee. The ERP-level subsystems of ERP/MES full-process informatization project include sales system, procurement system, MRP system, GMPQbD system, connecting UFIDA financial software and HR system. MES-level subsystems include industrial data acquisition and monitoring system, GAMP/MES system, eBPR (electronic batch production record system), cGMP quality assurance system, QC/eBTR(QC process and electronic batch inspection record system), LIMS system, etc. After the construction is completed, the visualization of drug production process and the collection and integration of industrial data will be realized. Realize the electronization of drug production process parameters, electronic batch production and inspection records; the realization of big data integration of industrial data and information will also be in line with the regulatory concept of GMP data integrity and quality traceability to the greatest extent. The establishment of a unified enterprise information platform will eliminate information islands and realize data one.
2020
07-31
The company's first-half profit record high
According to the 15th meeting of the ninth board of directors of the company on August 25, in the first half of 2017, the company achieved a net profit of 240.5357 million yuan, the highest level in half a year's history. In the first half of 2017, the company focused on the general work policy of "grasping trends, precise development, strengthening management, and improving efficiency", grasping the opportunities brought by economic structure optimization and industrial upgrading, strengthening lean production and management improvement internally, and actively exploring externally Develop new opportunities and continue to promote the "three reductions and three improvements" work. Through the joint efforts of all employees of the company, the best semi-annual performance in history has been achieved. As of the end of June 2017, the company's total assets were 4.226 billion yuan and net assets were 2.511 billion yuan; the company achieved total operating income of 1,305.9327 million yuan, an increase of 18.42 percent over the same period last year, and net profit attributable to owners of the parent company was 240.5357 million yuan, an increase of 132.11 percent over the same period last year. Earnings per share are 0.7 yuan. In the second half of the year, the company will continue to focus on the annual business plan, carry out in-depth work of "three reductions and three improvements", further do a good job in internal control, prevent business risks, and further do a good job in safety and environmental protection. we will further develop and improve the complementary relatively diversified main business structure and constantly enhance the company's core competitiveness. The 15th meeting of the 9th board of directors held on August 25 was presided over by Jiang Xiaomeng, chairman of the group company. Four proposals and reports including the 2017 semi annual report and the proposal on the change of the company's accounting policy were deliberated and passed. on the same day, the 12th meeting of the eighth board of supervisors was held,
2020
07-31
General Manager Yu Jianhong to Yunnan Peak to Guide Work
On August 23, Yu Jianhong, general manager of the group company, went to Yunnan Jianfeng cement company for investigation and guidance, and put forward requirements for the key work in the last few months of this year. At the peak of Yunnan Province, Yu Jianhong went deep into the production site to learn more about the current production and operation situation, and convened the middle-level and above management backbones to have in-depth exchanges and discussions with everyone on the problems existing in work efficiency changes, personnel stability, current production and management after the implementation of post optimization and re-organization. Since the beginning of this year, Yunnan's peak production and sales volume, profits and various technological and technical indicators have been relatively ideal. The kiln output in April has also reached the best level since it was put into production. The development and maintenance of the market, the environmental management of the factory area, and the professional quality and mental state of cadres and workers have also been greatly improved. While fully affirming the above achievements, Yu Jianhong pointed out that as the homogenization of the cement market becomes more and more serious, the market changes faster and faster. If we can't recognize the situation and seize the opportunity, enterprises will face more and more problems. In this case, the management backbone should give full play to the role of the backbone, quickly change the management concept, and strive to improve the competitiveness of enterprises. In view of the focus of work in the last four months of this year, Yu Jianhong put forward the following requirements for Yunnan Jianfeng: break the inherent concept of post functions and responsibilities, set up posts and organizational structures around logistics, people flow and capital flow, and cultivate and forge a team that can fight well. To further implement the training of job skills and quality, managers should take the lead in strengthening their own learning and formulate annual, monthly and weekly training plans, through the combination of internal and external training, theory and practice.
2020
07-30
General Manager Yu Jianhong to Yunnan Peak to Guide Work
On August 23, Yu Jianhong, general manager of the group company, went to Yunnan Jianfeng cement company for investigation and guidance, and put forward requirements for the key work in the last few months of this year. At the peak of Yunnan Province, Yu Jianhong went deep into the production site to learn more about the current production and operation situation, and convened the middle-level and above management backbones to have in-depth exchanges and discussions with everyone on the problems existing in work efficiency changes, personnel stability, current production and management after the implementation of post optimization and re-organization. Since the beginning of this year, Yunnan's peak production and sales volume, profits and various technological and technical indicators have been relatively ideal. The kiln output in April has also reached the best level since it was put into production. The development and maintenance of the market, the environmental management of the factory area, and the professional quality and mental state of cadres and workers have also been greatly improved. While fully affirming the above achievements, Yu Jianhong pointed out that as the homogenization of the cement market becomes more and more serious, the market changes faster and faster. If we can't recognize the situation and seize the opportunity, enterprises will face more and more problems. In this case, the management backbone should give full play to the role of the backbone, quickly change the management concept, and strive to improve the competitiveness of enterprises. In view of the focus of work in the last four months of this year, Yu Jianhong put forward the following requirements for Yunnan Jianfeng: break the inherent concept of post functions and responsibilities, set up posts and organizational structures around logistics, people flow and capital flow, and cultivate and forge a team that can fight well. To further implement the training of job skills and quality, managers should take the lead in strengthening their own learning and formulate annual, monthly and weekly training plans, through the combination of internal and external training, theory and practice.
2020
07-31
Spike Pharmaceuticals set out to explore a new sales model
Agency and Terminal Link Production and Chain Cooperation Spike Pharmaceuticals to Explore New Sales Models From August 16 to 21, the 2017 China Pharmaceutical Retail Industry Information Conference (hereinafter referred to as "Xipu Conference") with the theme of "Building a Blueprint-Market Awakening Focusing on Demand" was held in Boao, Hainan. Huang Jinlong, deputy general manager of the group company and general manager of the pharmaceutical company, and relevant leaders of Spike Health, pharmaceutical sales company and Spike Pharma pharmacy were invited to attend the event, to create a new sales model "road". This year coincides with the 10th anniversary of the Western Conference. More than 1200 mainstream chain pharmacies, more than 800 brand pharmaceutical industries, more than 100 cross-border affiliated institutions, more than 130 top domestic and foreign capital institutions, more than 60 representatives of authoritative media, and authoritative experts in the industry, with nearly 4000 people gathered in Boao. The meeting combed the context of the pharmaceutical retail industry in the past ten years, discussed the development of the industry in the new decade, and built a new blueprint for the industry. During the meeting, Huang Jinlong led the peak participants to have in-depth exchanges with the organizers of the conference and industry experts on issues such as the impact of national policies such as the brand strategy of enterprises, the role of brand enterprises in the industry, medical reform, prescription outflow, etc. on the original sales mode of pharmaceutical enterprises. He also had extensive contact with pharmaceutical counterparts and terminal chains, listened to front-line sales experience, collected relevant information on terminal chains, and collected market trends of the top 100 chains. In the past ten years, the scale of drug retail sales in China has increased from 143 billion yuan to 337.7 billion yuan, and the chain rate has increased from 35.3 percent to 49.4 percent.
2020
07-31
General Manager Yu Jianhong to Yunnan Peak to Guide Work
On August 23, Yu Jianhong, general manager of the group company, went to Yunnan Jianfeng cement company for investigation and guidance, and put forward requirements for the key work in the last few months of this year. At the peak of Yunnan Province, Yu Jianhong went deep into the production site to learn more about the current production and operation situation, and convened the middle-level and above management backbones to have in-depth exchanges and discussions with everyone on the problems existing in work efficiency changes, personnel stability, current production and management after the implementation of post optimization and re-organization. Since the beginning of this year, Yunnan's peak production and sales volume, profits and various technological and technical indicators have been relatively ideal. The kiln output in April has also reached the best level since it was put into production. The development and maintenance of the market, the environmental management of the factory area, and the professional quality and mental state of cadres and workers have also been greatly improved. While fully affirming the above achievements, Yu Jianhong pointed out that as the homogenization of the cement market becomes more and more serious, the market changes faster and faster. If we can't recognize the situation and seize the opportunity, enterprises will face more and more problems. In this case, the management backbone should give full play to the role of the backbone, quickly change the management concept, and strive to improve the competitiveness of enterprises. In view of the focus of work in the last four months of this year, Yu Jianhong put forward the following requirements for Yunnan Jianfeng: break the inherent concept of post functions and responsibilities, set up posts and organizational structures around logistics, people flow and capital flow, and cultivate and forge a team that can fight well. To further implement the training of job skills and quality, managers should take the lead in strengthening their own learning and formulate annual, monthly and weekly training plans, through the combination of internal and external training, theory and practice.
2020
07-31