Digging warehouse
Release time:
2020-07-22
dig warehouse
Yunnan peak cement company 4 cement warehouse has been P.O52.5 cement warehouse since it was completed and put into use. this year, the cement delivery speed of 4 cement warehouse is obviously slower than before. after inspection, it is found that there is a large amount of material at the bottom of the warehouse and the decompression cone in the warehouse collapses and blocks the blanking port, it is necessary to clear the warehouse in order to deal with the decompression cone, so it is urgent to clear the warehouse and dig the warehouse. On the morning of
9 April 23 , Yunnan peak opened the warehouse door and dug up the cement blocked at the warehouse opening with a hoe after completing the approval form for limited space operation. as the material on both sides was higher than that of the warehouse door, for safety reasons, the staff took the warehouse door as the center and widened both sides step by step to form steps to prevent the top material from sliding down, according to this method, a road about 1.5 meters wide was dug up to extend straight to the center of the warehouse, and then a shovel was used to return to 42.5 . after everyone's efforts, the road was finally dug through at about 5 that afternoon.
After detecting the oxygen content in the warehouse, the staff went into the warehouse along this road and checked the actual situation of the material with flashlights and safety lights: the material in the whole warehouse was in a slope shape, the material layer on the side near the warehouse door was higher and thicker, and the opposite side of the warehouse door was relatively lower and thinner. As the decompression cone pillar in the center of the warehouse collapsed, the cone cover was at the blanking port, and the decompression cone only exposed about 1/3, there are different sizes of suspended materials on the steel frame of the warehouse wall higher than the material layer. In addition, the materials are dug from high to bottom to the center of the warehouse at the bottom. Many difficulties such as large dust emission and poor sight bring great pressure to the safety of the warehouse digging work.
Based on the actual situation of the above-mentioned materials in the warehouse, on the day of 9 , 24 , Yunnan Peak worked out a preliminary arrangement: use a sledgehammer to knock off the materials suspended at the corresponding parts on the outer wall of the warehouse, at least four safety lights in the warehouse, make lifting rings with safety ropes on the steel frame on the inner wall of the warehouse, and the warehouse digging personnel wear protective glasses, dust masks and safety belts, special personnel shall be assigned to monitor and command the scene in the warehouse. After the approval form for limited space operation is completed every day, all warehouse digging personnel shall hold a safety meeting before warehousing, repeatedly emphasizing the operation requirements, special circumstances and emergency handling in the operation.
Clearing and digging a warehouse is a dangerous and very hard work. At the beginning, due to the large slope gradient, large dust, low visibility, and the collapsed cone cover at the blanking port, the blanking was slow, and seven or eight people could not do 20 minutes, so they had to go out of the warehouse to rest. Sometimes when dealing with more dangerous places, separate operations or regional operations are carried out in a targeted manner. In this way, it took 8 days to work. With everyone's efforts, the excavation of 4 cement warehouse, repair of decompression cone and maintenance of fluidization rod were successfully completed on 9 January 30 . According to statistics, a total of 67 people were put into this warehouse digging, with more than 200 tons of materials dug. (Chen Weichun)
More information
Tianjin Flemish Company Donates Anti-epidemic Materials
On the morning of July 13, Tianjin Jianfeng Flanders Pharmaceutical Technology Development Co., Ltd. donated materials to the Tianjin Development Zone Charity Association to help the development zone community fight the epidemic.
2020
08-05
In late July, leaders of the group company Jiang Xiaomeng, Yu Jianhong, Chen Tianci and Qin Xuping visited subordinate enterprises separately and sent heatstroke prevention and cooling supplies to employees working under high temperature, urging everyone to pay attention to heatstroke prevention and cooling and safe production work to ensure good physical condition.
2020
08-05
On July 17 and 18, the Group's work analysis meeting for the first half of 2020 was held at the Peak Building of the Group's headquarters to summarize and review the work in the first half of the year and make arrangements for the work in the second half of the year.
2020
08-05
The company requires to do a good job in summer safety production
The high temperature season is approaching, and the group company issued a notice a few days ago to make arrangements for safe production in summer.
2020
08-05
The company requires to do a good job in summer safety production
The high temperature season is approaching, and the group company issued a notice a few days ago to make arrangements for safe production in summer. The notice requires all subordinate units of the company to attach great importance to the work of production safety in summer, and all production and business units should hold a special meeting on production safety in summer. According to the characteristics of production in summer, they should focus on safety risk analysis for mines, outdoor operations and high-temperature posts, and implement control measures to avoid the occurrence of safety accidents such as scalding, heatstroke and electric shock. In order to further strengthen the safety production management in the high temperature season, the notice requires the main person in charge of each production and business unit to lead a team to conduct a comprehensive inspection of the production and business premises according to the characteristics of summer production; strengthen the daily safety production inspection of key posts and special posts; timely rectify the found unsafe behaviors and hidden dangers; Strengthen the management of the storage and use of flammable, explosive, dangerous chemicals and drugs; cooling measures shall be taken for the space exceeding the storage temperature limit of articles. If it is found that the electrical equipment circuit and exhaust fan circuit are aged and damaged, replace them in time and keep the grounding wire in good condition. Do a good job in checking the fire pool, pipeline water pressure and fire extinguishing equipment to ensure that the fire fighting facilities are sensitive, intact and reliable. The high temperature in summer is also a period of frequent occurrence of heatstroke and other diseases. The notice requires all units to do a good job in heatstroke prevention and cooling, implement various relevant measures, and equip necessary cooling facilities or materials such as fans, air conditioners, ice cubes and other cooling facilities or materials according to the conditions of the production site; do a good job in the distribution of heatstroke prevention drugs, supplies and cool drinks in workshops, warehouses, construction sites and other production lines; strengthen canteen management to prevent food poisoning. (this newspaper reporter)
2020
07-22
The company requires to do a good job in summer safety production
The high temperature season is approaching, and the group company issued a notice a few days ago to make arrangements for safe production in summer. The notice requires all subordinate units of the company to attach great importance to the work of production safety in summer, and all production and business units should hold a special meeting on production safety in summer. According to the characteristics of production in summer, they should focus on safety risk analysis for mines, outdoor operations and high-temperature posts, and implement control measures to avoid the occurrence of safety accidents such as scalding, heatstroke and electric shock. In order to further strengthen the safety production management in the high temperature season, the notice requires the main person in charge of each production and business unit to lead a team to conduct a comprehensive inspection of the production and business premises according to the characteristics of summer production; strengthen the daily safety production inspection of key posts and special posts; timely rectify the found unsafe behaviors and hidden dangers; Strengthen the management of the storage and use of flammable, explosive, dangerous chemicals and drugs; cooling measures shall be taken for the space exceeding the storage temperature limit of articles. If it is found that the electrical equipment circuit and exhaust fan circuit are aged and damaged, replace them in time and keep the grounding wire in good condition. Do a good job in checking the fire pool, pipeline water pressure and fire extinguishing equipment to ensure that the fire fighting facilities are sensitive, intact and reliable. The high temperature in summer is also a period of frequent occurrence of heatstroke and other diseases. The notice requires all units to do a good job in heatstroke prevention and cooling, implement various relevant measures, and equip necessary cooling facilities or materials such as fans, air conditioners, ice cubes and other cooling facilities or materials according to the conditions of the production site; do a good job in the distribution of heatstroke prevention drugs, supplies and cool drinks in workshops, warehouses, construction sites and other production lines; strengthen canteen management to prevent food poisoning. (this newspaper reporter)
2020
07-31