Digging warehouse
Release time:
2020-07-22
dig warehouse
Yunnan peak cement company 4 cement warehouse has been P.O52.5 cement warehouse since it was completed and put into use. this year, the cement delivery speed of 4 cement warehouse is obviously slower than before. after inspection, it is found that there is a large amount of material at the bottom of the warehouse and the decompression cone in the warehouse collapses and blocks the blanking port, it is necessary to clear the warehouse in order to deal with the decompression cone, so it is urgent to clear the warehouse and dig the warehouse. On the morning of
9 April 23 , Yunnan peak opened the warehouse door and dug up the cement blocked at the warehouse opening with a hoe after completing the approval form for limited space operation. as the material on both sides was higher than that of the warehouse door, for safety reasons, the staff took the warehouse door as the center and widened both sides step by step to form steps to prevent the top material from sliding down, according to this method, a road about 1.5 meters wide was dug up to extend straight to the center of the warehouse, and then a shovel was used to return to 42.5 . after everyone's efforts, the road was finally dug through at about 5 that afternoon.
After detecting the oxygen content in the warehouse, the staff went into the warehouse along this road and checked the actual situation of the material with flashlights and safety lights: the material in the whole warehouse was in a slope shape, the material layer on the side near the warehouse door was higher and thicker, and the opposite side of the warehouse door was relatively lower and thinner. As the decompression cone pillar in the center of the warehouse collapsed, the cone cover was at the blanking port, and the decompression cone only exposed about 1/3, there are different sizes of suspended materials on the steel frame of the warehouse wall higher than the material layer. In addition, the materials are dug from high to bottom to the center of the warehouse at the bottom. Many difficulties such as large dust emission and poor sight bring great pressure to the safety of the warehouse digging work.
Based on the actual situation of the above-mentioned materials in the warehouse, on the day of 9 , 24 , Yunnan Peak worked out a preliminary arrangement: use a sledgehammer to knock off the materials suspended at the corresponding parts on the outer wall of the warehouse, at least four safety lights in the warehouse, make lifting rings with safety ropes on the steel frame on the inner wall of the warehouse, and the warehouse digging personnel wear protective glasses, dust masks and safety belts, special personnel shall be assigned to monitor and command the scene in the warehouse. After the approval form for limited space operation is completed every day, all warehouse digging personnel shall hold a safety meeting before warehousing, repeatedly emphasizing the operation requirements, special circumstances and emergency handling in the operation.
Clearing and digging a warehouse is a dangerous and very hard work. At the beginning, due to the large slope gradient, large dust, low visibility, and the collapsed cone cover at the blanking port, the blanking was slow, and seven or eight people could not do 20 minutes, so they had to go out of the warehouse to rest. Sometimes when dealing with more dangerous places, separate operations or regional operations are carried out in a targeted manner. In this way, it took 8 days to work. With everyone's efforts, the excavation of 4 cement warehouse, repair of decompression cone and maintenance of fluidization rod were successfully completed on 9 January 30 . According to statistics, a total of 67 people were put into this warehouse digging, with more than 200 tons of materials dug. (Chen Weichun)
More information
Representatives of the 20th Congress preached the 20th Congress at the peak.
On the afternoon of November 11, a special lecture on the spirit of the Party's 20th Congress was held in the conference room of the Peak Building. Yang Xiayun, a representative of the 20th National Congress, walked into the peak and preached his understanding of the spirit of the 20th National Congress for Party members through personal experience.
2022
11-23
The group party committee organizes and learns the twenty spirits.
On the afternoon of October 28, the party Committee of the group organized all members to hold a special study meeting to earnestly study and understand the communique of the first plenary session of the 20th central Committee of the communist party of China and the revision of the party constitution. Jiang Xiaomeng, Secretary of the Party committee of the group, stressed at the study meeting that the 20th National Congress of the Communist Party of China has drawn a grand blueprint for building a socialist modern country in an all-round way, opened a new chapter in the era of national development, and pointed out the direction for the future development of enterprises. Party organizations at all levels of the group should pay full attention to and earnestly implement it, actively organize party members and cadres to learn the spirit of the spirit of the 20th National Congress, And to guide the future work practice.
2022
11-01
Spike Party Members and Cadres Watch the Opening Meeting of the 20th Congress
At 10 a.m. on October 16, the 20th National Congress of the Communist Party of China was solemnly opened in the Great Hall of the People in Beijing. Xi Jinping delivered a report to the Party's 20th National Congress on behalf of the 19th Central Committee. The group company attaches great importance to and carefully deploys, and organizes all party members and management backbones of the group headquarters and subsidiaries to watch the live broadcast of the opening meeting through the Internet, TV and other methods.
2022
10-23
Jiang Xiaomeng was hired as the "Shuanglong Escort" entrepreneurial mentor.
On September 16, Jiang Xiaomeng, Secretary of the Party committee and chairman of the group company, was employed as the entrepreneurial mentor of "Shuanglong escort" at the launching ceremony of the special action of "Shuanglong escort steady progress and quality improvement" held in Jinhua City and the promotion meeting of innovative products of key talent enterprises in Jinhua City.
2022
09-27
From August 18th to 19th, the 12th Congress of the Zhejiang Federation of Industry and Commerce was held in Hangzhou, and the 12th leadership of the Provincial Federation of Industry and Commerce was elected. Jiang Xiaomeng, Secretary of the Party Committee and Chairman of the Group, was re-elected as Vice President of Zhejiang Chamber of Commerce.
2022
09-01