Digging warehouse
Release time:
2020-07-22
dig warehouse
Yunnan peak cement company 4 cement warehouse has been P.O52.5 cement warehouse since it was completed and put into use. this year, the cement delivery speed of 4 cement warehouse is obviously slower than before. after inspection, it is found that there is a large amount of material at the bottom of the warehouse and the decompression cone in the warehouse collapses and blocks the blanking port, it is necessary to clear the warehouse in order to deal with the decompression cone, so it is urgent to clear the warehouse and dig the warehouse. On the morning of
9 April 23 , Yunnan peak opened the warehouse door and dug up the cement blocked at the warehouse opening with a hoe after completing the approval form for limited space operation. as the material on both sides was higher than that of the warehouse door, for safety reasons, the staff took the warehouse door as the center and widened both sides step by step to form steps to prevent the top material from sliding down, according to this method, a road about 1.5 meters wide was dug up to extend straight to the center of the warehouse, and then a shovel was used to return to 42.5 . after everyone's efforts, the road was finally dug through at about 5 that afternoon.
After detecting the oxygen content in the warehouse, the staff went into the warehouse along this road and checked the actual situation of the material with flashlights and safety lights: the material in the whole warehouse was in a slope shape, the material layer on the side near the warehouse door was higher and thicker, and the opposite side of the warehouse door was relatively lower and thinner. As the decompression cone pillar in the center of the warehouse collapsed, the cone cover was at the blanking port, and the decompression cone only exposed about 1/3, there are different sizes of suspended materials on the steel frame of the warehouse wall higher than the material layer. In addition, the materials are dug from high to bottom to the center of the warehouse at the bottom. Many difficulties such as large dust emission and poor sight bring great pressure to the safety of the warehouse digging work.
Based on the actual situation of the above-mentioned materials in the warehouse, on the day of 9 , 24 , Yunnan Peak worked out a preliminary arrangement: use a sledgehammer to knock off the materials suspended at the corresponding parts on the outer wall of the warehouse, at least four safety lights in the warehouse, make lifting rings with safety ropes on the steel frame on the inner wall of the warehouse, and the warehouse digging personnel wear protective glasses, dust masks and safety belts, special personnel shall be assigned to monitor and command the scene in the warehouse. After the approval form for limited space operation is completed every day, all warehouse digging personnel shall hold a safety meeting before warehousing, repeatedly emphasizing the operation requirements, special circumstances and emergency handling in the operation.
Clearing and digging a warehouse is a dangerous and very hard work. At the beginning, due to the large slope gradient, large dust, low visibility, and the collapsed cone cover at the blanking port, the blanking was slow, and seven or eight people could not do 20 minutes, so they had to go out of the warehouse to rest. Sometimes when dealing with more dangerous places, separate operations or regional operations are carried out in a targeted manner. In this way, it took 8 days to work. With everyone's efforts, the excavation of 4 cement warehouse, repair of decompression cone and maintenance of fluidization rod were successfully completed on 9 January 30 . According to statistics, a total of 67 people were put into this warehouse digging, with more than 200 tons of materials dug. (Chen Weichun)
More information
Jingmai Airport Test Flight Successfully Runway Cement Spike Manufacturing
On April 7, a Boeing 737-700 aircraft of China Eastern Airlines Yunnan took off from Kunming. After completing two flight test subjects, it landed safely at Lancang Jingmai Airport. This not only marked the basic completion of the airport flight area, The official start of the test flight also marked that the "Peak" brand airport runway cement passed the first "final exam". Lancang Jingmai Airport is a major project with milestone significance in the history of Pu'er transportation construction. Since then, an air corridor connecting southwest Yunnan and Southeast Asia has been added between Kunming and Pu'er, which will greatly promote the development and utilization of tourism resources in Lancang, Menglian and Ximeng "Pu'er Green Triangle" area, and promote the sustainable development of local economy and society; it is of great significance to strengthen the city's national defense construction, maintain border stability, promote national unity, improve emergency rescue capabilities, and promote Pu'er's integration into the country's "Belt and Road" construction. Since the start of the construction of the airport, Yunnan Jianfeng has been paying close attention to it, organizing technical research and repeated tests, and finally produced high-quality airport runway special cement, and with excellent product quality, superior product performance and high-quality service, it has become a runway for Lancang Airport. Cement manufacturer. This not only fills the gap of "peak" airport special cement, but also is of great significance to promote the "peak" brand and improve the market influence of enterprises. It is understood that Jingmai Airport is initially confirmed to be officially opened to traffic at the end of May. (Li Liangping)
2020
07-31
Jianfeng Pharmaceutical Artificial Niuhuang Project Starts
News from this newspaper Jianfeng Pharmaceutical artificial bezoar technical transformation project recently started construction in Qiubin Factory. Artificial bezoar has the effect of clearing away heat and detoxification, resolving phlegm, and is commonly used in Chinese and Western medicines such as colds, clearing away heat and detoxification. As the vast majority of artificial bezoar-related preparations are national essential drugs, with the further implementation of the medical reform policy, the downstream industry of artificial bezoar will enter a new round of business cycle. Jianfeng Pharmaceutical has many years of experience in artificial bezoar production. The technological transformation project will use the existing workshop structure, public works and operators of Qiubin Factory to achieve an annual production capacity of 100 tons of artificial bezoar by adding production equipment such as double cone rotary vacuum drying, horizontal ball mill pulverizer unit, hopper and hoist, closed screening system, and upgrading some public systems. According to the project implementation plan, the project will complete the civil engineering in May. Complete the commissioning, testing and verification of equipment and facilities in July, with trial production conditions; Strive to complete the on-site inspection of GMP certification before the end of December. At present, the factory buildings in Qiubin are vacated and the site is cleaned up. It is understood that the production of natural bezoar is very small, the price is extremely high, and the market rarely provides it. As a biochemical API, artificial bezoar has fewer manufacturers. In the past, due to relatively loose supervision, the testing methods of raw materials and finished products are relatively simple, the quality control indicators are not perfect, and the quality of products on the market is uneven. It is imperative to improve the quality standards. To this end, the State Food and Drug Administration issued the "Biochemical Drug GMP Quality Management Practice (Draft for Comment)" at the end of 2016, which was implemented in March 2017. spike medicine
2020
07-31
Recently, Jianfeng Health has been awarded a number of plaques and certificates by the Department of Science and Technology of Zhejiang Province, the people's Government of Jinhua City, and the Science and Technology Bureau of Jinhua City. They are "Zhejiang Science and Technology small and medium-sized Enterprises", "Jinhua High-tech Enterprises", "Jinhua Agricultural Science and Technology Enterprises", "Jinhua Agricultural Science and Technology Research and Development Center" and so on. According to the relevant requirements, Zhejiang science and technology-based small and medium-sized enterprises must be small and medium-sized enterprises with independent intellectual property rights, proprietary technology or advanced knowledge, engaged in the research, development, production, sales and service of high-tech and its products, and the proportion of enterprises engaged in scientific and technological research and development personnel accounting for no less than 10% of the total number of employees in that year. Since its establishment, Jianfeng Health has attached great importance to the training of scientific and technological personnel, paid attention to the application of its own intellectual property rights, paid attention to product research and development and the protection of intellectual property rights, promoted the application of intellectual property rights, and encouraged employees to invent and create. By the end of 2016, a total of 8 invention patents and 5 appearance patents had been applied, and 1 invention patent and 5 appearance patents had been obtained. High-tech enterprises in Jinhua City must meet the requirements of the ''High-tech Fields Supported by the State, ''and continue to carry out research and development and technological achievements transformation. Their main products (services) have independent intellectual property rights (authorized, registered or accepted). There are certain requirements for the proportion of R & D personnel, the proportion of R & D funds and the income of high-tech products. The acquisition of high-tech enterprises in Jinhua City has laid the foundation for the further declaration of national high-tech enterprises in the future. In the identification of agricultural science and technology enterprises in Jinhua City, the field of peak health technology belongs to the deep processing technology and equipment of agricultural products, Chinese herbal pieces and plant extracts.
2020
07-31
Jingmai Airport Test Flight Successfully Runway Cement Spike Manufacturing
On April 7, a Boeing 737-700 aircraft of China Eastern Airlines Yunnan took off from Kunming. After completing two flight test subjects, it landed safely at Lancang Jingmai Airport. This not only marked the basic completion of the airport flight area, The official start of the test flight also marked that the "Peak" brand airport runway cement passed the first "final exam". Lancang Jingmai Airport is a major project with milestone significance in the history of Pu'er transportation construction. Since then, an air corridor connecting southwest Yunnan and Southeast Asia has been added between Kunming and Pu'er, which will greatly promote the development and utilization of tourism resources in Lancang, Menglian and Ximeng "Pu'er Green Triangle" area, and promote the sustainable development of local economy and society; it is of great significance to strengthen the city's national defense construction, maintain border stability, promote national unity, improve emergency rescue capabilities, and promote Pu'er's integration into the country's "Belt and Road" construction. Since the start of the construction of the airport, Yunnan Jianfeng has been paying close attention to it, organizing technical research and repeated tests, and finally produced high-quality airport runway special cement, and with excellent product quality, superior product performance and high-quality service, it has become a runway for Lancang Airport. Cement manufacturer. This not only fills the gap of "peak" airport special cement, but also is of great significance to promote the "peak" brand and improve the market influence of enterprises. It is understood that Jingmai Airport is initially confirmed to be officially opened to traffic at the end of May. (Li Liangping)
2020
07-30
Peak Pharmaceutical was rated as a national intellectual property advantage enterprises
The score ranked first among Jinhua participating enterprises. A few days ago, Peak Pharmaceutical Company was rated as a national intellectual property advantage enterprise. The selection of national intellectual property advantage enterprises is organized by the State Intellectual Property Office. The purpose is to accelerate the formation of a group of Chinese intellectual property leading enterprises with independent intellectual property rights, well-known brands and international competitive advantages, and achieve the development goal of strong intellectual property enterprises. Since Jianfeng Pharmaceutical introduced the GB-T29490-2013 "Enterprise Intellectual Property Management Standard" in 2013, it has been rated as a patent demonstration enterprise in Zhejiang Province in 2013. In 2014, the "Jianfeng" trademark obtained a famous trademark in Zhejiang Province, and the first edition of the "Intellectual Property Manual" was compiled and implemented in 2015. In 2016, it passed the third-party certification of the GB-T29490-2013 "Enterprise Intellectual Property Management Standard". The "Jianfeng" trademark was rated as a well-known trademark by the State Administration of China. In the application and selection of national knowledge by superior enterprises, 52 enterprises in Zhejiang Province won this honor, ranking second in the country in number; Jianfeng Pharmaceutical ranked first among Jinhua participating enterprises. (Zhang Mingyin)
2020
07-31
Group Party Committee to determine the annual work plan
The party Committee of the group company has determined its work ideas and work plan for 2017 a few days ago, and relevant work has been arranged below. In view of the current new political and economic situation and the task of enterprise transformation and development, the general requirements of the Party Committee of the Group Company for 2017 are: to thoroughly study and implement the spirit of the Sixth Plenary Session of the 18th CPC Central Committee and the series of important speeches by General Secretary Xi Jinping, the spirit of the Seventh Party Congress of Jinhua City, to closely revolve around the center of enterprise production, operation and reform and development, and to adhere to scientific development and cross-regional development as the first priority, in order to continue to carry out the study and education of "five stars striving for innovation" and "two learning and one doing", we should highlight the main line of comprehensively and strictly administering the party according to the rules, firmly establish the political consciousness, overall situation consciousness, core consciousness and alignment consciousness of the majority of Party members and cadres, strengthen and improve the party building work in enterprises in the spirit of reform, and strive to improve the scientific, standardized and institutionalized level of Party building work in enterprises, in order to promote the scientific development of the group company, leapfrog development and harmonious development, it provides a strong political, ideological and organizational guarantee. The working idea of the Party Committee of the Group Company in 2017 is to focus on "one center", adhere to "one concept", highlight "three key points" and do a good job in "three constructions". That is: centering on the "one center" of enterprise production, operation and reform and development, we should strive to strengthen the "one concept" of "the organic unity of the party's leadership and the improvement of corporate governance"; to "thoroughly implement the main responsibility of the party committee; continue to carry out the study and education of" two learning and one doing "; and improve the system of party building work" as the "three key points", and focus on "team building and team building
2020
07-31
Contact Us
No. 88 Wujiang East Road, Jinhua City, Zhejiang Province, China
Tel: +86-579-82326868
Fax : +86-579-82324666
©2023 Zhejiang Jianfeng Group Co., Ltd. Powered by: www.300.cn SEO Business License
SAF Coolest v1.2 设置面板 SHJSS-AHDB-FSSQE-ZSW
无数据提示
Sorry, the current column has no content !
You can view other columns or return to Home Page