The Importance of Having a Good Pre-class and Post-class Meeting
Release time:
2020-07-22
Importance of Pre-shift and Post-shift Meeting
During the maintenance period, Tianjin Cement Industry Design Institute insists on organizing the pre-shift and post-shift meeting every day at 6:55 every morning according to the maintenance safety requirements of Yunnan Jianfeng Cement Company. The pre-shift meeting of the
maintenance team is an effective form to predict the hazard identification on the operation site on the same day and enhance the accident prevention ability, confirm the equipment condition on the same day, and carry out safety education in combination with the actual maintenance and construction conditions. When assigning tasks and explaining safety precautions, the project leader and safety officer must be concentrated and focused, and strive to make every employee show the best mental outlook when taking up their posts, to ensure the maintenance, construction safety production.
Project leaders and safety officers can make obvious prompts and safety warnings at different locations for different equipment on site. To find different key points at different operating points, do not grab your eyebrows and beard. You have no key points and make employees at a loss. For example, there is a general alarm at the high-altitude operation and three-dimensional cross operation site. At the pre-shift meeting, team members should be specially prompted to do a good job in safety precautions during equipment maintenance and avoid cross operation as much as possible. Let team members participate in the team's work, thus stimulating his enthusiasm for work. The safety officer should be careful and meticulous, check each operation point frequently, adjust and coordinate in time when finding high-altitude operation and three-dimensional cross operation, and always keep each operation point within the controllable range.
To ensure safety, in addition to human and management factors, to a large extent depends on the integrity of labor protection supplies. However, in order to ensure the good condition of labor protection articles and make them play their normal role in labor protection, teams and groups should carefully maintain them in normal times and not let go of any hidden dangers of labor protection articles. At present, the latest "Safety Production Law" stipulates that safety helmets without cap belts are equivalent to not wearing them. For equipment hazards can not only be limited to a simple discovery, but to the equipment hazard analysis, research, find the cause of the source of danger, put forward reasonable suggestions, and strive to eliminate the equipment hazard in the bud. After
shift, the meeting will summarize the work situation of the day in time. While recognizing the work of the team members, the deficiencies of safety precautions should be pointed out. Through continuous summary, improve the overall level of the team. Safety work must not be heavy results, light process. Analyze the problems found in the process in time, solve them in the bud, and take precautions. (Liu Fengbin)
More information
Publicity of Environmental Protection Acceptance for Completion of Kiln End Flue Gas Desulfurization Project of daye peak cement co., ltd. According to the requirements of the Interim Measures for Environmental Protection Acceptance for Completion of Construction Projects (No.4 [2017] of the State Environmental Regulations) issued by the Ministry of Environmental Protection, the environmental protection acceptance information of "Kiln End Flue Gas Desulfurization Project" of daye peak cement co., ltd. is now publicized. Basic Information of 1. Project Project Name: Kiln End Flue Gas Desulfurization Project Construction Unit: daye Jianfeng Cement Co., Ltd. Project Construction Location: Yongguang Village, Baoan Town, daye city, nature of the project in the existing plant area of daye Jianfeng Cement Co., Ltd.: The construction content of the technological transformation project is: This technological transformation project is mainly to build a wet desulfurization system for kiln end gas of the company's existing 4000t cement clinker production line, adopting limestone-gypsum wet flue gas desulfurization process. The project covers a total area of 500 m2, with a new construction area of about 450 m2. It mainly builds desulfurization complex building, flue gas system, SO2 absorption system, limestone powder conveying and limestone slurry preparation system, process water system, gypsum dehydration system and supporting pipelines. Power supply, water supply, compressed air and other public works rely on the existing plant. Total investment and environmental protection investment: the total investment of the project is 10.37 million yuan, all of which are environmental protection investment. The project was entrusted to Huangshi Yangtze River Environmental Engineering Design and Research Institute to carry out environmental impact assessment in September 2017. On November 16, 2017, Daye Municipal Environmental Protection Bureau issued a reply with YEHAN [2017] No. 354. Implementation of 2. environmental protection measures The scope of this acceptance is the flue gas desulfurization system and supporting facilities at the end of the kiln. (1) Exhaust gas pollution
2020
07-31
Spike New Drug Approved for Registration
On April 16, Jianfeng Pharmaceutical Company received the approval and issuance of Olopatadine Hydrochloride Eye Drops "Drug Registration Approval" (approval number: 2019S00296) approved by the State Drug Administration. Olopatadine hydrochloride eye drops is mainly used to treat the signs and symptoms of allergic conjunctivitis. It is a mast cell stabilizer and a relatively selective histamine H1-receptor antagonist. It can inhibit type I immediate allergic reactions in vivo and in vitro experiments. At present, the product has been included in the "National Basic Medical Insurance, Work Injury Insurance and Maternity Insurance Drug Catalog (2017 Edition)" and classified as Class B. According to the relevant data of IMS database, in 2018, the global sales of olopatadine hydrochloride eye drops were about 0.37 billion US dollars, and the sales in China were about 10.232 million US dollars. Spike Pharmaceuticals already has the corresponding production line, this time to obtain the registration approval, marking Spike Pharmaceuticals has the qualification to carry out the production and sales of olopatadine hydrochloride eye drops, will further enrich the product line of Spike Pharmaceuticals, help to enhance the competitiveness of the company's pharmaceutical business. (Xia Yingpin)
2020
07-31
Spike New Drug Approved for Registration
On April 16, Jianfeng Pharmaceutical Company received the approval and issuance of Olopatadine Hydrochloride Eye Drops "Drug Registration Approval" (approval number: 2019S00296) approved by the State Drug Administration. Olopatadine hydrochloride eye drops is mainly used to treat the signs and symptoms of allergic conjunctivitis. It is a mast cell stabilizer and a relatively selective histamine H1-receptor antagonist. It can inhibit type I immediate allergic reactions in vivo and in vitro experiments. At present, the product has been included in the "National Basic Medical Insurance, Work Injury Insurance and Maternity Insurance Drug Catalog (2017 Edition)" and classified as Class B. According to the relevant data of IMS database, in 2018, the global sales of olopatadine hydrochloride eye drops were about 0.37 billion US dollars, and the sales in China were about 10.232 million US dollars. Spike Pharmaceuticals already has the corresponding production line, this time to obtain the registration approval, marking Spike Pharmaceuticals has the qualification to carry out the production and sales of olopatadine hydrochloride eye drops, will further enrich the product line of Spike Pharmaceuticals, help to enhance the competitiveness of the company's pharmaceutical business. (Xia Yingpin)
2020
07-31