Metro special communication cable, we can produce!
Release time:
2020-07-22
subway special communication cable, we can produce!
In June of this year, the cable company added a new steel belt winding machine, which is mainly used to develop a steel belt winding machine for subway special communication cables. 8# August 26 , the first order with a total amount of more than one million was delivered, which also indicates that the cable company has the production capacity of such products since then. At present, many cities in China plan to build subways and light rails, and urban rail transit projects are on the agenda. Customer demand for communication cables for metro trunk lines is increasing, with more and more inquiries. However, due to the particularity of its use environment, the communication cable for subway trunk line is also very different from ordinary cable in terms of various index requirements. It not only requires good waterproof performance, but also has good shielding performance against external interference. The outer sheath should have flame retardant, low smoke and halogen-free performance, as well as anti-rodent small animal bite, anti-termite, anti-corrosion, anti-pressure and other requirements, the cable of the ground section also needs to be UV-proof.
Cable Company has produced oil-filled, waterproof and environmentally friendly cables and has accumulated some production experience. However, due to the limitation of equipment, although there are many inquiries, the salesman can only decline. In response to this situation, at a meeting of middle-level cadres in
, everyone proposed to purchase a steel belt winding production line and started to develop special cables for subway trunk lines, hoping to become a new economic growth point. In order to use smaller input and faster output, the cable company decided to buy a second-hand equipment to practice hands, and then buy a new production line after having the experience of steel belt winding. After having this idea, the relevant department of the cable company immediately contacted several suppliers of second-hand equipment. Guo Zhijian, the equipment supervisor, went to Nanjing in person and found that there was a steel belt winding machine with a split motor, which was of good quality and met the production requirements. Therefore, it cost 10,000 yuan to buy it back, and the winding machine was first installed on a
sheathing machine, and the winding and winding machine and tractor of the sheathing production line were used for debugging. After nearly a month of debugging, the main motor and the sub-motor are coordinated, and the steel belt is wound evenly, and the result is satisfactory. The equipment has been installed and debugged, and then there is the order. When everyone is expecting to take a small order and try it out, a million orders suddenly
hit " came over. Millions of orders come unexpectedly, which is a surprise, motivation and pressure for cable companies. The order amount is large and the delivery time is tight. The production capacity of a steel belt winding machine cannot meet the delivery date. However, it is a pity to give up this order. As a result, the cable company has found outsourcing manufacturers to help process and solve the urgent need. After nearly 20 days of intense and busy production, the order task was finally successfully completed. With this experience, the cable company also has the technological capability of this kind of products. Therefore, the cable company has re-equipped this steel belt winding machine with a special take-up and take-off machine and crawler traction machine to form a complete production line. The production line is currently being installed in full swing. (lu chao-fang)
More information
Publicity of Environmental Protection Acceptance for Completion of Kiln End Flue Gas Desulfurization Project of daye peak cement co., ltd. According to the requirements of the Interim Measures for Environmental Protection Acceptance for Completion of Construction Projects (No.4 [2017] of the State Environmental Regulations) issued by the Ministry of Environmental Protection, the environmental protection acceptance information of "Kiln End Flue Gas Desulfurization Project" of daye peak cement co., ltd. is now publicized. Basic Information of 1. Project Project Name: Kiln End Flue Gas Desulfurization Project Construction Unit: daye Jianfeng Cement Co., Ltd. Project Construction Location: Yongguang Village, Baoan Town, daye city, nature of the project in the existing plant area of daye Jianfeng Cement Co., Ltd.: The construction content of the technological transformation project is: This technological transformation project is mainly to build a wet desulfurization system for kiln end gas of the company's existing 4000t cement clinker production line, adopting limestone-gypsum wet flue gas desulfurization process. The project covers a total area of 500 m2, with a new construction area of about 450 m2. It mainly builds desulfurization complex building, flue gas system, SO2 absorption system, limestone powder conveying and limestone slurry preparation system, process water system, gypsum dehydration system and supporting pipelines. Power supply, water supply, compressed air and other public works rely on the existing plant. Total investment and environmental protection investment: the total investment of the project is 10.37 million yuan, all of which are environmental protection investment. The project was entrusted to Huangshi Yangtze River Environmental Engineering Design and Research Institute to carry out environmental impact assessment in September 2017. On November 16, 2017, Daye Municipal Environmental Protection Bureau issued a reply with YEHAN [2017] No. 354. Implementation of 2. environmental protection measures The scope of this acceptance is the flue gas desulfurization system and supporting facilities at the end of the kiln. (1) Exhaust gas pollution
2020
07-31
Spike New Drug Approved for Registration
On April 16, Jianfeng Pharmaceutical Company received the approval and issuance of Olopatadine Hydrochloride Eye Drops "Drug Registration Approval" (approval number: 2019S00296) approved by the State Drug Administration. Olopatadine hydrochloride eye drops is mainly used to treat the signs and symptoms of allergic conjunctivitis. It is a mast cell stabilizer and a relatively selective histamine H1-receptor antagonist. It can inhibit type I immediate allergic reactions in vivo and in vitro experiments. At present, the product has been included in the "National Basic Medical Insurance, Work Injury Insurance and Maternity Insurance Drug Catalog (2017 Edition)" and classified as Class B. According to the relevant data of IMS database, in 2018, the global sales of olopatadine hydrochloride eye drops were about 0.37 billion US dollars, and the sales in China were about 10.232 million US dollars. Spike Pharmaceuticals already has the corresponding production line, this time to obtain the registration approval, marking Spike Pharmaceuticals has the qualification to carry out the production and sales of olopatadine hydrochloride eye drops, will further enrich the product line of Spike Pharmaceuticals, help to enhance the competitiveness of the company's pharmaceutical business. (Xia Yingpin)
2020
07-31
Spike New Drug Approved for Registration
On April 16, Jianfeng Pharmaceutical Company received the approval and issuance of Olopatadine Hydrochloride Eye Drops "Drug Registration Approval" (approval number: 2019S00296) approved by the State Drug Administration. Olopatadine hydrochloride eye drops is mainly used to treat the signs and symptoms of allergic conjunctivitis. It is a mast cell stabilizer and a relatively selective histamine H1-receptor antagonist. It can inhibit type I immediate allergic reactions in vivo and in vitro experiments. At present, the product has been included in the "National Basic Medical Insurance, Work Injury Insurance and Maternity Insurance Drug Catalog (2017 Edition)" and classified as Class B. According to the relevant data of IMS database, in 2018, the global sales of olopatadine hydrochloride eye drops were about 0.37 billion US dollars, and the sales in China were about 10.232 million US dollars. Spike Pharmaceuticals already has the corresponding production line, this time to obtain the registration approval, marking Spike Pharmaceuticals has the qualification to carry out the production and sales of olopatadine hydrochloride eye drops, will further enrich the product line of Spike Pharmaceuticals, help to enhance the competitiveness of the company's pharmaceutical business. (Xia Yingpin)
2020
07-31